• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.214-225
• /
• 2005

The mountain village development program in Korea started in the mountain villages, the 45.9% of total land and one of the typical marginal region, from 1995 to achieve the equilibrium development of national land and the sustainable mountain development in Chapter 13 in Agenda 21, and it has been accelerated to increase the happiness and the quality of life of mountain community residents through the expansion by province and the improvement of related laws and regulations. This study has been aimed to analyze the response of main stakeholder's -mountain village residents and local government officials - on mountain villages development, and to provide the future plan as community development. The survey and interview data were collected from the mountain villages which already developed 59 villages and developing 15 villages in 2003. The mountain village development program has achieved the positive aspects as community development plan in the several fields, - the voluntary participation of residents, the establishment of self-support spirit as the democratic civilians, the development of base of income increasement, the creation of comfortable living environment, the equilibrium development with the other regions. Especially the mountain residents and local government officials both highly satisfy with the development of base of income increasement and the creation of comfortable living environment which are the main concerns to both stakeholder. However through the mountain development program, it is not satisfied to increase the maintenance of local community and the strengthening of traditional value of mountain villages. Also to improve the sustainable income improvement effects, it is necessary to develop the income items and technical extension which good for the each region. In the decentralization era, it is necessary for local government should have the more active and multilateral activities for these. With this, the introduction of methods which the mountain community people and the local government officials could co-participate in the mountain villages' development from the initial stages and the renovation of related local government organizations and the cooperatives will be much helpful to the substantiality of mountain development program. Also it is essential for the assistance of central government to establish the complex plan and the mountain villages network for all mountain area and the exchange of information, the education and training of mountain villages leader who are the core factor for the developed mountain villages maintenance, the composition of national mountain villages representatives. In case the development proposals which based on the interests of the main stakeholder's on mountain community could be positively accepted, then the possibility of the mountain village development as one of community development will be successfully improved in future.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1881-1894
• /
• 2015

The objective of this study was to provide information on difficulty of performing tasks, degree of task satisfaction, job satisfaction, organizational commitment, and turnover intention as well as investigate correlations among these factors. Data were collected on employees working at Centers for Children's Foodservice Management, which had been operating for over 6 months until December 2013. The recruitment period was from December 16, 2013 to January 30, 2014. A total of 228 employees (79.7%) participated in the study, and 227 completed questionnaires were analyzed. Statistical analyses were performed on the data utilizing the SPSS V20.0 and AMOS V21.0 programs. The main results of this study were as follows: task satisfaction of employees in charge of 'visiting-teaching' for children was highest (4.24 points), whereas that of employees in charge of financial management was lowest (2.92 points). In terms of evaluation of job satisfaction factors, the score of 'co-worker' was highest (3.99 points) while that of 'payment' was lowest (2.45 points). Average scores of general job satisfaction, organizational commitment, and turnover intention were 3.56 points, 3.54 points, and 3.07 points, respectively. Job achievement was the most significant influencing factor on general job satisfaction, organizational commitment, and turnover intention. According to the path analysis results, the degree of task satisfaction affected job satisfaction. Organizational commitment had a more significant effect on turnover intention than job satisfaction and mediate both job satisfaction and turnover intention. Although employees of CCFSMs endeavor to improve the quality of child-care facility foodservice, some facilities do not. Controlling turnover intention of employees is especially critical for CCFSMs since it is important for each employees to form strong bonds with child-care facilities as well as to shorten the time required to train new employees. Thus, job satisfaction, which is related to organizational commitment and turnover intention, can be improved by considering poorly scored job satisfaction factors such as wage or workload.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.236-250
• /
• 2016

This study was conducted to provide baseline data regarding functional cosmetics so that Inula. based cosmetics can increase its competitiveness in the market as well as to understand current trends to enable anticipation of demands for future product development. For this research, general consumers over the age of 20 residing in Seoul and the Gyeonggi district were surveyed. The results show consumers preferred serum-type products among various types of cosmetics, and that they purchased these once every 1-3 months. Consumers also preferred these products in less than 10-30ml capacity, and at costs of less than 30,000-50,000 KRW. For whitening, functional cosmetics consumers also preferred the serum type, in less than 30-50ml capacity and priced less than 30,000-50,000 KRW. Consumers preferred to purchase functional cosmetics in single units. The major purchasing location, with a high preference rate, was cosmetic stores, and the major sources of information, also with high preference rates, were 'experienced reviews from family, friends and acquaintances' and 'TV advertisements'. Respondents selected 'over 50,000 KRW' the most for all items when responding to 'Purchase Intent for Functional Cosmetics containing Inula', and responded that they were willing to pay 10%-30% more for functional cosmetics containing Inula compared to standard functional cosmetics. These results show that businesses in the cosmetics industry need to take consumer demand into account when developing new functional cosmetic products, as well as establish plans to create specialized spaces that provide better quality service and increase word of mouth effect through better utilization of various types of offline media, social media, and blogs. The study also shows a need for businesses to develop products fully utilizing the Inula flower, which has been shown to be effective as a natural skin whitener, wrinkle reducer and skin moisturizer, to appeal to the increasing number of customers interested in health and beauty.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.135-149
• /
• 2000

Most of prior works on testing parallel programs have concentrated on how to guarantee the reproducibility by employing event traces exercised during executions of a program. Consequently, little work has been done to generate test cases, especially, from specifications produced from software development process. In this research work, we devise the techniques for deriving test cases automatically from the specifications written in Message Sequence Charts(MSCs) which are widely used in telecommunication areas and develop the testing environment for performing module testing of parallel programs with derived test cases. For deriving test cases from MSCs, we have to uncover the causality relations among events embedded implicitly in MSCs. For this, we devise the methods for adapting vector time stamping to MSCs, Then, valid event sequences, satisfying the causality relations, are generated and these are used as test cases. The generated test cases, written in TTCN, are translated into CHILL source codes, which interact with a target module to be tested and test the validity of behaviors of the module. Since the testing method developed in this research work extracts test cases from the MSC specifications produced front telecommunications software development process, it is not necessary to describe auxiliary specifications for testing. In audition adapting vector time stamping generates automatically the event sequences, the generated event sequences that are ones for whole system can be used for individual testing purpose.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.4
• /
• pp.339-349
• /
• 2010

The uses of the polypropylene bulk bags having the loading capacities more than 500 kg are increasing in Korea recently as a storage container for rough rice. This study was performed to obtain the basic information on the changes of temperature and relative humidity in the bulk-bag-stored high moisture rough rice during waiting for drying. At the moisture content more than 22% on wet weight basis of paddy, the bulk-bag inside temperature rose up to more than $40^{\circ}C$ and then slid down during storage. For example, in case of Hwaseongbyeo, 26.5% moisture content of rough rice (MCRR) harvested at 46 days after heading (DAH) showed $54.5^{\circ}C$ of peak temperature at 66.8 hours after bulk-bag loading, 22.5% MCRR harvested at 52 DAH exhibited $42.0^{\circ}C$ at 81.1 hours, and 19.7% MCRR harvested at 55 DAH displayed $38.9^{\circ}C$ at 119.0 hours. There were a good linear relationship between peak temperatures of bulk-bag inside and moisture contents of paddy ($r^2$=0.89 in 2005, and 0.87 in 2006), while the slope and intercept of the linear regression equation was affected by the environmental conditions such as ambient temperatures and microbial flora. The peak temperatures increased with the rate of about $2.74-3.33^{\circ}C$ per every 1% increase of moisture content at higher moisture contents of paddy than 19%. The relative humidity varied depending on bulk-bag inside temperature and rough rice moisture content, and showed the range of 94.2% to 99.9% in the central point of the bulk-bag. The results suggested that a rapid drying treatment as soon as possible was needed to produce a good quality of rice when the paddy of high moisture more than 22% on wet basis was harvested in a bulk-bag especially at high ambient temperature.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2020

PET(Positron Emission Tomography) devices are used as PET/CT or PET/MRI devices fused with the devices of CT or MRI for obtaining anatomical information. Therefore, the devices are constructed in circular ring-type structure whose length of gantry(the main part of filming) becomes wider and the interior depth becomes longer in comparison to other common medical equipments. scintillator, one of the components in PET devices, is inside the gantry, and as it is consisted of crystal which is sensitive to the change of temperature and humidity, large temperature change can cause the scintillator to be damaged. Though scintillator located inside the gantry maintains temperature and humidity with a thermo-hygrostat, changes in temperature and humidity are expected due to structural reasons. The output value was measured by dividing the inside of the gantry of the PET/CT device into six zones, each of which an Adafruit BME 280 temperature and humidity sensor was placed at. A thermo-hygrostat keeps the temperature and humidity constant in the PET/CT room. As the measured value of temperature and humidity of the sensor was obtained, the measured value of temperature and humidity appeared in the thermohygrostat was taken at the same time. Comparing the average measured values of temperature and humidity measured at each six zones with the average values of the thermo-hygrostat results in a difference of 2.71℃ in temperature and 21.5% in humidity. The measured temperature and humidity of PET Gantry is out of domestic quality control range. According to the results of the study, if there is continuous change in temperature and humidity in the future, the aging of the scintillator mounted in the PET Gantry is expected to be aging, so it is necessary to find a way to properly maintain the temperature and humidity inside the Gantry structure.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• Korean Journal of Poultry Science
• /
• v.8 no.2
• /
• pp.55-68
• /
• 1981

Calcium and phosphorus are not only indispensable for the bone formation and body fluids equilibrium but also are major components of egg shell. It is nutritionally important, therefore, to investigate the metabolism of calcium and phosphorus and to search for optimum requirement of calcium and phosphorus and the availability of various sources of calcium an4 phosphorus by poultry. An attempt was made to review the nutrition of calcium and phosphorus in poultry diets. 1, Calcium and phosphorus have great interrelationship with vitamin D in their metabolisms. 2. Most of the plant-origin phosphorus are existing in phytic form and it leads to low availability when used in poultry rations, although calcium and phosphorus present in animal-origin or mineral supplements are highly available in general. 3. Calcium and phosphorus requirement from existing information indicated that 1.0% calcium and 0.7% phosphorus for broiler and egg-type chicks, and 3.5% calcium and 0.4% phosphorus for laying hen. 4. It has been recommended that calcium and phosphorus level should be increased when the feed intake was decreased or when the egg Production rate was higher or when the hens are old. 5. Mono-, ci-, tri-, calcium phosphate, calcium carbonate, bone meal, limestone and oyster shell u the most readily available among various sources of calcium phosphorus supplements. Soft rock phosphate, deflourinated phosphate and gypsum are somewhat inferior to the previous ones in bioavailability. 6. The effect of particle size of calcium supplements on egg shell quality and egg production rate is not yet clearly defined but recent works showed that oyster shell is more available when it was coarse and limestone is more available when it was fine in panicle. size. 7. Present data indicated that mixed feeding of oyster shell and limestone is superior to the single feeding of each on laying performance. 8. Significant interaction between phosphorus and sodium was observed, that is, excessive sodium decreased egg production in layer and body weight growth in broiler in the low phosphorus diets but increased them in the high phosphorus diets.

• The Korean Society of Law and Medicine
• /
• v.17 no.2
• /
• pp.85-124
• /
• 2016

The Human gene testing act (GenDG) in Germany starts from the characteristic features of gene testing, i.e. dualisting structure consisted of anlaysis on the one side and the interpretation on the other side. The linguistic distincion of 'testing', 'anlaysis' and 'judgment' in the act is a fine example. Another important basis of the regulation is the ideological purpose of the law, that is information autonomy. The normative texts as such and the founding principle are the basis of the classification of testing types. Especially in the case of gene testing for medical purpose is classified into testing for diagnostic purpose and predictive purpose. However, those two types are not always clearly differentiated because the predictive value of testing is common in both types. In the legal regulation of gene testing it is therefore important to manage the uncertainty and subjectivity which are inherent in the gene-analysis and the judgment. In GenDG the system ensuring the quality of analysis is set up and GEKO(Commity for gene tisting) based on the section 23 of GenDG concretes the criterium of validity through guidelines. It is also very important in the case of gene testing for medical purpose to set up the system for ensurement of procedural rationality of the interpretation. The interpretation of the results of analysis has a wide spectrum because of the consistent development of technology on the one side and different understandings of different subjects who performs gene testings. Therefore the process should include the communication process for patients in oder that he or she could understand the meaning of gene testing and make plans of life. In GenDG the process of genetic counselling and GEKO concretes the regulation very precisely. The regulation as such in GenDG seems to be very suggestive to Korean legal polic concerning the gene testing.

• Journal of the Korean association of regional geographers
• /
• v.2 no.1
• /
• pp.69-85
• /
• 1996

This research adoptes a spatial analysis function of the Geographic Information System[GIS] to analyze the location and the service district of a collective consumption facility, to discover the optimal location, and to redefine the service district. The location and spatial district of a collective consumption facility strongly influences the quality of life of residents. This research studies administrative offices and districts, especially Gu-offices in Ulsan. Ulsan would be raised to the status of Kwangyokshi in 1997; so that, the status of four Gus would be changed from a general administration into a self-governing administration. The summary of this research focuses on five significant points. First, the districts of four Gus were strongly required to be redefined to obtain the maximization of the degree of potential development as well as of the efficiency and equity of administring services. The spatial range of residents in a Gu was not in accord with its administrative district. The administrative districts of four Gus in Ulsan were not balanced in terms of area and population, and the high degree of disparity among Gus existed the efficiency and equality of a collective consumption service. Second, the current gu-offices were located based on security of land and accessibility of a main route; so, there was difficult to find the creteria and the principles of selections of the location of Gu offices. The social disparity of an administrative service existed in the accessibility into Gu-offices. Third, the administrative districts of Gus were redefined with spatial analysis tool of ARC/INFO. It was recommended that Ulsan maintain four Gus under the condition of five Kwangyokshi in South Korea. The redefined districts of administration reduced the disparity among four Gus in terms of area and population. improved the degree of harmony between the spatial range of residents of Gus and the administrative district of Gus, and increased the efficiency and equity of administrative service. Fourth, within the redefined adminis trative district of a Gu, the centroid reduced the maximum distance and mean distance; so, the efficiency and equity of public service provided by the Gu-office were improved. Last, the spatial analysis function of GIS helped to select the optimal location and to delineate the district of public service with more speedly and objectively. The function of spatial analysis of GIS was very useful to minimize the conflict in the determination of the location of a collective consumption facility and of the service district. To improve location analysis with GIS. non-spatial data base such as budget, thought of residents, and development policy and program, should be constructed.