• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.05a
• /
• pp.28-44
• /
• 1993

Remediation actions in uncontrolled landfill site should be conducted after the investigation of contamination status and potential health risk or damage. Based on the above, proper control measures should be established and operated. Also continuous monitoring should be followed. In this study, the status of ground water contamination around Nanji Landfill Site was investigated. Monitoring wells were installed around the landfill and ground water was sampled once a month and analyzed. Water quality of each monitoring well was different depending on the horizontal and vertical distance from the landfill, and the seasonal leachate characteristics were not significantly changed because percolating water stayed long time in the deep waste layer. It was predicted that major multivalent cations were mainly precipitated as metal carbonate form, and chemical mass balances (CMBs) could be applied for the apportionment of leachate contamination to ground water quality of surrounding areas of Nanji Landfill. Parameters required to estimate pollutant flux to the receptor near landfill were listed and discussion to get these parameters was made. Finally, based on the above data, control measures of ground water contamination were suggested and discussed.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.731-739
• /
• 2011

To investigate corrosivity characteristics of tap water in Korea, Langelier index (LI) of 30 multi-regional water treatment plants (WTPs) were evaluated. Weekly LI values of 30 WTPs were all negative, which means tap water in Korea might be very corrosive. Maximum LI decrease through water treatment processes was 0.95 under no additional corrosion control process. Based on the correlation results between LI and tap water qualities, pH and calcium concentration were confirmed as major parameters for LI control. Addition of calcium hydroxide with $CO_{2}$ or calcium hydroxide or sodium hydroxide can be chosen based on water quality. Continuous monitoring of LI and related parameters is recommended in water distribution system.

• Imaging Science in Dentistry
• /
• v.47 no.2
• /
• pp.75-86
• /
• 2017

Purpose: The purpose of this study was to apply a newly developed free software program, at low cost and with minimal time, to evaluate the quality of dental and maxillofacial cone-beam computed tomography (CBCT) images. Materials and Methods: A polymethyl methacrylate (PMMA) phantom, CQP-IFBA, was scanned in 3 CBCT units with 7 protocols. A macro program was developed, using the free software ImageJ, to automatically evaluate the image quality parameters. The image quality evaluation was based on 8 parameters: uniformity, the signal-to-noise ratio (SNR), noise, the contrast-to-noise ratio (CNR), spatial resolution, the artifact index, geometric accuracy, and low-contrast resolution. Results: The image uniformity and noise depended on the protocol that was applied. Regarding the CNR, high-density structures were more sensitive to the effect of scanning parameters. There were no significant differences between SNR and CNR in centered and peripheral objects. The geometric accuracy assessment showed that all the distance measurements were lower than the real values. Low-contrast resolution was influenced by the scanning parameters, and the 1-mm rod present in the phantom was not depicted in any of the 3 CBCT units. Smaller voxel sizes presented higher spatial resolution. There were no significant differences among the protocols regarding artifact presence. Conclusion: This software package provided a fast, low-cost, and feasible method for the evaluation of image quality parameters in CBCT.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.1
• /
• pp.62-74
• /
• 2002

The tracking of a reference temperature trajectory in a polymerization batch reactor is a common problem and has critical importance because the quality control of a batch reactor is usually achieved by implementing the trajectory precisely. In this study, only energy balances around a reactor are considered as a design model for control synthesis, and material balances describing concentration variations of involved components are treated as unknown disturbances, of which the effects appear as time-varying parameters in the design model. For the synthesis of a tracking controller, a method combining the input-output linearization of a time-variant system with the parameter estimation is proposed. The parameter estimation method provides parameter estimates such that the estimated outputs asymptotically follow the measured outputs in a specified way. Since other unknown external disturbances or uncertainties can be lumped into existing parameters or considered as another separate parameters, the method is useful in practices exposed to diverse uncertainties and disturbances, and the designed controller becomes robust. And the design procedure and setting of tuning parameters are simple and clear due to the resulted linear design equations. The performances and the effectiveness of the proposed method are demonstrated via simulation studies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3458-3474
• /
• 2014

The performance of IEEE 802.11e enhanced distributed channel access (EDCA) is influenced by several interactive parameters that make quality of service (QoS) control complex and difficult. In EDCA, the most critical performance influencing parameters are the arbitration interframe space (AIFS) and contention window size (CW) of each access category (AC). The objective of this paper is to provide a scheme for parameter control such that the throughput per station as well as the overall system throughput of the network is maximized and controllable. For this purpose, a simple and accurate analytical model describing the throughput behavior of EDCA networks is presented in this paper. Based on this model, the paper further provides a scheme in which a Pareto optimal system configuration is obtained via an appropriate CW control for a given AIFS value, which is a different approach compared to relevant papers in the literature that deal with CW control only. The simulation results confirm the effectiveness of the proposed method which shows significant performance improvements compared to other existing algorithms.

• Korean Journal of Agricultural Science
• /
• v.46 no.2
• /
• pp.239-256
• /
• 2019

The quality of tomatoes drastically changes according to storage conditions, such as temperature, humidity, and air composition. High storage temperatures result in the degradation of the firmness and color of tomatoes and in decay by bacteria, whereas chilling injury and softening can be caused by storage at low temperatures. The gas composition in the storage and packaging are other parameters that influence the quality and shelf life of tomatoes by preventing excessive transpiration and respiration. In addition, tomato quality is dependent on the degree of maturity and harvest season. Because there are many quality parameters, it is necessary to systemically establish an optimal standard, and this approach requires collecting and reviewing various data on storage conditions. The aim of this review was to provide basic information by comparing and analyzing studies on the changes in tomato quality (firmness, color, lycopene content, and acidity of tomatoes) during storage and to describe a few models that can assess the quality parameters. Many studies have provided results from experiments on the effects of postharvest control (e.g., storage temperature, packaging film, and gas treatment, as reviewed above) on tomato quality including firmness, soluble solids content, and lycopene content. However, it is still necessary to conduct an overall analysis of the published conditions and to determine the best method for preserving the quality of tomatoes as well as other fruits.

• Journal of Korean Society for Quality Management
• /
• v.43 no.1
• /
• pp.57-66
• /
• 2015

Purpose: The purpose of this study is to apply the constrained Bayesian estimation methodology for product quality control process and prove the effectiveness of the product management by comparing with the well-known Bayes estimator through data performance result. Methods: The Bayes and constrained Bayes estimators were produced based on the theoretical background and for confirming the effectiveness of suggested application, the deviation index was defined and calculated for the comparison. Results: The statistical analysis result shows that applying the suggested estimation methodology, that is, constrained Bayes estimator improves the effectiveness of the index with regard to reduce the error by matching the first two empirical moments. Conclusion: Considering the advanced Bayesian approaches such as constrained Bayes estimation for the product quality control process, the newly defined deviation index reduces the error for estimating the parameter histogram which is reflected both location and deviation parameters and furthermore various Bayesian perspective approaches seems to be meaningful for managing the product quality control process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.384-388
• /
• 1997

Recently,direct rolling process has been drawing increasing interests because production cost be greatly reduced by eliminating subsequent hot rolling processes. Such a process has been characterized to prosuce thin steel strip (thickness 1~5mm) directly from molten metal and to skip over the conventional hot rolling processes. However, since there are several process parameters, which affect the quality of product,and their relationship between the parametersare very complex,it is therefore very difficult to realize the process design and the quality control. To overcome these difficulties quantitative relationship between the parameters are investigated through a numerical analysis. Form these results, it is found that solidification final point is the most important paramter which is critical to quality of the strip. Also,the multiple regression model is obtianed to determine their relationship from the solidification final point and roll separating force which can be easily estimated

• Journal of the Korean Institute of Navigation
• /
• v.23 no.4
• /
• pp.105-114
• /
• 1999

Generally, though we use the vision sensor or arc sensor in welding process, it is difficult to define the welding parameters which can be applied to the weld quality control. Especially, the important Parameters is Arc Voltage, Welding Current, Welding Speed in arc welding process and they affect the decision of weld bead shape, the stability of welding process and the decision of weld quality. Therefore, it is difficult to determine the unique relationship between the weld bead geometry and the combination of various welding condition. Due to the various difficulties as mentioned, we intend to use Fuzzy Logic and Neural Network to solve these problems. Therefore, the combination of Fuzzy Logic and Neural network has an effect on removing the weld defects, improving the weld quality and turning the desired weld bead shape. Finally, this system can be used under what kind of welding recess adequately and help us make an estimate of the weld bead shape and remove the weld defects.

• Clinical and Experimental Reproductive Medicine
• /
• v.47 no.2
• /
• pp.101-107
• /
• 2020

Objective: The present study investigated sperm chromatin quality and testosterone levels in acrylamide-treated mice and the possible protective effects of vitamin E on the fertility potential of spermatozoa. Methods: Thirty-two adult male mice were divided equally into four groups. Group 1 was the control, group 2 received acrylamide (10 mg/kg, water solution), group 3 received vitamin E (100 mg/kg, intraperitoneal), and group 4 received both acrylamide and vitamin E. After 35 days, spermatozoa from the right cauda epididymis were analyzed in terms of count, motility, morphology, and viability. Sperm DNA integrity and chromatin condensation were assessed by acridine orange (AO), aniline blue (AB), toluidine blue (TB), and chromomycin A3 (CMA3) staining. Results: In acrylamide-treated mice, significantly lower sperm concentration, viability, motility, and testosterone levels were found in comparison with the control and acrylamide+vitamin E groups (p< 0.05). In the vitamin E group, significantly more favorable sperm parameters and testosterone levels were found than in the other groups (p< 0.05). There were also significantly more spermatozoa with less condensed chromatin in the acrylamide-treated mice than in the other groups. Moreover, significantly more spermatozoa with mature nuclei (assessed by AB, CMA3, AO, and TB staining) were present in the vitamin E group than in the control and acrylamide+vitamin E groups. Conclusion: This study revealed the deleterious effects of acrylamide on sperm parameters and sperm chromatin quality. Vitamin E can not only compensate for the toxic effects of acrylamide, but also improve sperm chromatin quality in mice.