• KIEAE Journal
• /
• 제6권1호
• /
• pp.39-46
• /
• 2006

Multi-use housing and commercial buildings have been emerged according to social and economic changes of CBD in Seoul Metropolitan Areas. The purpose of this study is to clarify the characteristics of the multi-use building, to analyze the problems on the base of survey and to suggest the solutions for architectural planning, focusing on eco-friendly dwelling environment. A field survey with 46 subjects has been carried out with structured questionnaire. Some problems in planning of the complex building have been discussed in terms of environmental issues and design criteria. In conclusion, basic planning directions for improving the building environmental quality have been suggested.

• 한국환경과학회지
• /
• 제23권12호
• /
• pp.2071-2082
• /
• 2014

In this study, the environmental consciousness of Daegu citizen on conservation planning considering the regional characteristics was investigated. Data were collected throughout a survey and 1400 people were selected using a stratified sampling method based on populations of Daegu administration district. Results wee followings; First, the levels of environmental consciousness were different dependent on districts' characteristics. Second, poor awareness on Daegu Agenda 21 (Clear and Green Daegu 21) were shown. Daegu Agenda 21 is the action plan for the sustainable environmental conservation activities of the City of Daegu. Third, waste was the most serious environmental problems of Daegu, air quality was second worst, and third was river water quality from the survey, but differentiated awareness was shown dependent on regional spatial factors and pollution emission factors. Last, a public environmental education was the most important issue to make invigorations and progress for future environmental policy.

• 경영과학
• /
• 제13권3호
• /
• pp.91-104
• /
• 1996

The basic idea of Quality Function Deployment(QFD) is to deploy the voice of customers into the final product through product planning, part planning, process planning, and manufacturing. In the product planning stage, which is the first stage of product development, customer attributes(CAs) are translated into engineering characteristics(ECs). Then, based on the relationship between CAs and ECs, the target values of ECs are determined. In the previous research, the process of analyzing these relationships is mostly subjective in nature. In this article, we formulate the process of determining the target values of ECs as an optimization model. That is, we first determine the relationship between CAs and ECs as cumulative logit models and construct constraints into which the company strategy as well as the needs of customers can be incorprated. Next, cost functions of ECs are developed, which are summed into an objective function. An algorithm to solve the formulated optimization problem is developed and illustrated with an example.

• 품질경영학회지
• /
• 제28권3호
• /
• pp.82-90
• /
• 2000

MBNQA(Malcolm Baldrige National Quality Award) was established in 1987 in order to promote the spread of TQM in U.S. Likewise, JQA(Japanese Quality Award) was set up in 1995 in order to upgrade the level of TQM activities in Japan. MBNQA and JQA are quite the same in their basic concepts, values, and the process of the examination, but they differ in the contents of the criteria. The objective of this study is to Identify the differences between MBNQA and JQA in terms of strategy planning category, Therefore, in this paper, strategy planning category is analyzed, especially its theoretical validity is examined by literature review. The major differences are as follows: JQA emphasizes strongly the evaluation process than MBNQA by requiring the measuring of the level of strategic achievement. On the other hand, in MBNQA, strategic objectives must be estimated by decision analysts techniques, scenario tools, and other statistical methodologies.

• 품질경영학회지
• /
• 제28권4호
• /
• pp.140-150
• /
• 2000

MBNQA(Malcolm Baldrige National Quality Award) was established in 1987 in order to promote the spread of TQM in U.S. Likewise, JQA(Japanese Quality Award) was set up in 1995 in order to upgrade the level of TQM activities in Japan. MBNQA and JQA are quite the same in their basic concept, values, and the process of the examination, but they differ in the contents of the criteria. The objective of this study is to identify the differences between MBNQA and JQA in terms of strategy planning category. Therefore, in this paper, strategy planning category is analyzed, especially its theoretical validity is examined by literature review. The major differences are as follows: JQA emphasizes strongly the evaluation process than MBNQA by requiring the measuring of the level of strategic achievement. On the other hand, in MBNQA, strategic objectives must be estimated by decision analysis techniques, scenario tools, and other statistical methodologies.

• Journal of Hospice and Palliative Care
• /
• 제25권1호
• /
• pp.42-49
• /
• 2022

As population aging increases the burden of cancer, the quality of death of patients with cancer is emerging as an important issue alongside their quality of life. To improve the quality of death, it is necessary to prepare for death, allowing patients to die comfortably and with dignity at the end. Considering these issues, I aim to discuss the practical aspects of notifying the patient of the terminal phase of cancer and planning for end-of-life care (i.e., advance care planning). When cancer treatment that can extend the patent's lifespan becomes difficult, the patient enters a treatment transition period. Treatment is shifted from life-prolonging care to life-enhancing care, and end-of-life care must be well planned. Medical providers often worry too much about whether the patient will be disappointed or psychologically traumatized when notified of the terminal phase of their cancer, thus delaying plans for end-of-life care. In fact, patients can accept their condition and prepare for end-of-life care better than we expect. During the treatment transition period, notification of terminal status should be given, and a well-prepared advance care plan should be established early when the patient has decision-making ability. In addition to conveying information, it is always necessary to be sensitive to whether the patient and caregiver understand the information and respond to their emotions.

• 한국건설관리학회논문집
• /
• 제25권3호
• /
• pp.68-82
• /
• 2024

The planning stage of laser scanning is crucial for acquiring high-quality 3D source data. It involves assessing the target space's environment and formulating an effective measurement strategy. However, existing practices often overlook on-site conditions, with decisions on scanner deployment and scanning locations relying heavily on the operators' experience. This approach has resulted in frequent modifications to scanning locations and diminished 3D data quality. Previous research has explored the selection of optimal scanner locations and conducted preliminary reviews through simulation, but these methods have significant drawbacks. They fail to consider scanner inaccuracies, do not support the use of multiple scanners, rely on less accurate 2D drawings, and require specialized knowledge in 3D modeling and programming. This study introduces an optimization technique for laser scanning planning using 3D simulation to address these issues. By evaluating the accuracy of scan data from various laser scanners and their positioning for scanning a retaining wall structure in a small-scale building, this method aids in refining the laser scanning plan. It enhances the decision-making process for end-users by ensuring data quality and reducing the need for plan adjustments during the planning phase.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.446-449
• /
• 1993

Presented in this paper is the process planning for multi-weldline/multi-pass robot welding. First, downhand welding for welding quality and stability for welding productivity, the two concept of process planning for single-weldling/single-pass robot weldling are derived. Next, process planning procedure for single-weldling/single-pass robot weldling is proposed and the procedure is extended for multi-weldling and/or multi-pass robot welding.

• Radiation Oncology Journal
• /
• 제36권1호
• /
• pp.1-10
• /
• 2018

Intensity-modulated radiation therapy (IMRT) has been considered the most successful development in radiation oncology since the introduction of computed tomography into treatment planning that enabled three-dimensional conformal radiotherapy in 1980s. More than three decades have passed since the concept of inverse planning was first introduced in 1982, and IMRT has become the most important and common modality in radiation therapy. This review will present developments in inverse IMRT treatment planning and IMRT delivery using multileaf collimators, along with the associated key concepts. Other relevant issues and future perspectives are also presented.

• 기술혁신학회지
• /
• 제13권2호
• /
• pp.365-378
• /
• 2010

지속적인 성장을 위하여 정부는 R&D투자 규모를 지속적으로 늘리고 있으며, 동시에 R&D 성과의 산업화 연계 등 성과활용 관점의 관리와 인프라를 강화하고 있다. 그러나 사후적인 성과관리보다는 우수한 결과가 도출될 수 있는 사전적인 R&D기획이 더욱 중요하다. 본 연구는 우수한 R&D성과의 창출을 위한 R&D기획에 대한 시사점을 제시하고자, 신재생에너지 분야 중 연료전지와 태양전지 분야 특허를 대상으로 가산자료 모형을 활용하여 특허의 질적 수준 결정요인을 비교 분석 하였다. 분석결과 기술별로 결정요인은 서로 상이하게 나타나 R&D기획이 기술별로 구별되어야 함을 보였고, 결과를 바탕으로 우수한 R&D성과를 도출할 수 있는 연료전지, 태양전지 분야의 R&D기획 방향을 제시하였다.