• Journal of Korean Society for Quality Management
• /
• 제42권4호
• /
• pp.591-606
• /
• 2014

Purpose: The purpose of this study is to design an experimental simulation model for evaluating the UGV(Unmanned Ground Vehicle) effectiveness in a small unit combat scenario. Methods: We design and build a simulation model to evaluate the combat effectiveness of UGV in a small unit combat scenario. In order to build a simulation model, we used AnyLogic software tool which has functional advantages to describe agent-based simulation model. As for the combat scenario, we applied the typical engagement of mechanized unit equal or lower than battalion level. Analysis process follows the three phases. 1) Design an agent based conceptual medel in a small unit combat scenario. 2) Build a simulation medel using AnyLogic tool. 3) Analyze the simulation results and evaluate the UGV effectiveness. Results: The UGV effectiveness was measured and presented as a numeric values. Those numeric values were represented as a MOE(Measure of Effectiveness) which was the blue survival ratio. Conclusion: We developed an agent based simulation model which can provide a pattern of change how UGV effectiveness varied depending upon the number of UGV in a small unit combat scenario. We also found that the UGV effectiveness grows in the given scenario as the number of UGV increases.

• International conference on construction engineering and project management
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.661-668
• /
• 2022

Various lean design and construction methods such as target value design, pull planning, value stream mapping have successfully transformed the commercial building construction industry into achieving improved productivity, higher design and construction quality, and meeting the target values of construction projects. Considering the significant advantages of lean, the accelerated dissemination and adoption of lean methods and tools for construction is highly desirable. Currently, the lean design and construction body of knowledge is imparted primarily through publications and conferences. However, one of the most effective ways to impart this soft knowledge is through getting students and trainees involved in hands-on participatory games, which can quickly help them truly understand the concept and apply it to real-world problems. The COVID-19 Pandemic has raised an urgent need of developing virtual games that can be played simultaneously from various locations over the Internet, but these virtual games should be as effective as in-person games. This research develops an online 3D simulation game for Target Value Design that is as effective as in-person games or possibly better in terms of knowledge capture and retention and enjoyable environment and experience. The virtual game is tested on volunteers using feedback from pre-and post- simulation surveys to evaluate its efficacy.

• Journal of Environmental Science International
• /
• 제28권11호
• /
• pp.951-958
• /
• 2019

Seoullo7017, an elevated linear park, was created to redevelop obsolete road infrastructure as public space, which provides unique landscapes. This study was aimed to evaluate and suggest proper planting design for improving psychological benefits in Seoullo7017. Field survey and simulation experiment were carried out to investigate the user's perception on the landscapes. Many users had negative feelings of the present landscapes in Seoullo7017, due to concrete pavement and simple planting design using big concrete pots. Landscape simulation experiment showed this perception could change depending on planting design. In especial, herb species played an important role in improving the quality of landscape in a linear park and providing positive feelings such as refreshment, warmth and naturalness. This study suggested that planting design in a linear space needs to be focused rather on the planting style and species than the volume of greens.

• Korean Journal of Computational Design and Engineering
• /
• 제17권2호
• /
• pp.79-90
• /
• 2012

In digital virtual manufacturing simulation, Digital Human widely used to optimal workplace design, enhancing worker safety in the workplace, and improving product quality. However, the case of ergonomics simulation solutions to support digital human modeling, Optimal DHM (Digital Human Model) data needed to develop and perform DHM will collect information related to the production process. So simulation developer has burden of collecting information. In this study, to overcome the limitations of existing solutions, we proposed the ADAGIO(Automated Digital humAn model development for General assembly usIng Ontology) framework. The ADAGIO framework was developed for DHM ontology to support optimal deployment of digital virtual environment and in order to ensure consistency of simulation components that are required for simulation modeling was made of a library.

• Journal of Korean Society for Quality Management
• /
• 제46권1호
• /
• pp.27-38
• /
• 2018

Purpose: A large number of attributes with mixed levels are often considered in the conjoint analysis. In the cases where attributes have two or three levels, we research on the efficient design of survey questionnaire to estimate all the main effect and two factor interaction effects with a reasonable size of it. Methods: To reduce the number of questions in a questionnaire, the balanced incomplete block mixed level factorial design with minimum aberration was proposed by Lim and Chung (2016). Based on the number of questions and that of the respondents in that design, D-optimality criterion is adopted to find efficient designs where the main effect and two factor interaction effects are estimated. Results: The list of the number of questions and that of the respondents in efficient designs for survey questionnaire are recommended based on the D-efficiency of each design and the proposed selection criteria for the number of both questions and the respondents. By analyzing all the respondents survey data generated by the simulation study, we find the proper model. Conclusion: The proposed methods of designing survey questionnaires seem to perform well in the sense that how often the proper model is found in a simulation study where all the respondents survey data are generated by the simulation model.

• Journal of Biosystems Engineering
• /
• 제28권3호
• /
• pp.187-198
• /
• 2003

This study was conducted to investigate the effect of design parameters of modulating valve and hydraulic clutch on the shift quality of a power shuttle transmission using a computer simulation. Computer simulation models of a hydraulic control system and a power shuttle drive train were developed and verified by an experimental power train in a laboratory. The software EASY5 was used for the modeling and simulation of the power shuttle transmission. Results of the study were summarized as follows: For a good shift quality. it is required to reduce the transient torque transmitted to the output shaft of the transmission as much as possible. This may be achieved by reducing the modulating time and clutch pressure. It was found that the design parameters most significantly affecting the modulating time and clutch pressure were the spring constant and displacement of a load piston of the modulating valve, and the spring constant and damping of the clutch piston. The modulating time decreased as the spring constant increased and increased as the displacement of the load piston decreased. The transient torque decreased as the modulating time increased. However their relationships were not always linear. As the damping decreased, both the modulating pressure and time decreased, which also resulted in a decrease in the transient torque. The spring constant of the clutch piston affected the modulating time and the peak transient torque. As the spring constant of the clutch increased, the peak transient torque decreased.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제7권3호
• /
• pp.75-80
• /
• 2008

The progressive die performs a work of sheet metal processes with a piercing, notching, embossing, bending, drawing, cut-off etc. in many kinds of pressing. Now a days, these processes have been evaluated as a advanced tooling method to increase the productivity and high quality assurance. The first step analyzing of die design is production part review, then the arrangement drawing of product design and strip process layout design should be done as a next steps with a FEM simulation for its problem solution. After upper procedure were peformed, it was started to make the die, then tryout and its revision of the die and product quality, safety, productivity etc. were done continually. For the all of these process, we mobilized the theory and practice of sheet metal forming, die structure, the function and activity of die components, and the others of die machining, die material, heat treatment and know‐how so on. In this study the features of representative are production part analyzing through the FEM simulation of bending area with a considering spring back problem by DEFORM.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• 제14권6호
• /
• pp.90-97
• /
• 2015

Optimization of multi-quality characteristics in injection molded parts is very important, but it is sometimes difficult for part/mold designers. The objective of this study is to develop a practical design methodology for optimizing two-quality characteristics of injection molded parts. To attain this end, we developed a new design-range reduction algorithm based on Taguchi's orthogonal arrays for two characteristics. Then, the algorithm was integrated with commercial injection-molding simulation tools. A feature of the proposed methodology is that it allows field-designers unfamiliar with general optimization methods to be able to apply the methodology to their design problems with ease. Finally, we have applied the proposed design methodology to optimization of weldlines and deflections in an actual bezel model. The results show the usefulness of this methodology.

• Korean Journal of Computational Design and Engineering
• /
• 제9권2호
• /
• pp.133-142
• /
• 2004

CAMPfonn2D is a Finite Element Method (FEM) based process simulation system designed to analyze two dimensional (2D) flow of various metal forming processes. It enables designers to analyze metal forming processes on the computer rather than the shop floor using trial and error and provides vital information about material and thermal flow during the forming process to facilitate the design of products. CAMPfonn2D can be used by companies, research institutes and industrial applications to analyze forging, extrusion, drawing, heading, upsetting and many other metal forming processes. Also, process simulation using CAMPfonn2D can be instrumental in cost, quality and delivery improvements at leading companies. Today's competitive pressures require companies to take advantage of every tool for rapid manufacturing of well-designed product. So, the preprocessor of simulation program must be easy to use to speed-up design. In this paper, we introduce new version of Preprocessor and show how easy to use it. And, Preprocessor will prove itself to be easy and extremely effective.

• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.625-633
• /
• 2005

Vehicle drift was reduced using statistical six sigma tools. The study was performed through four steps: M (measure), A (analyze), I (improve), and C (control). Step M measured the main factors which were derived from a fishbone diagram. The measurement system capabilities were analyzed and improved before measurement. Step A analyzed critical problems by examining the process capability and control chart derived from the measured values. Step I analyzed the influence of the main factors on vehicle drift using DOE (design of experiment) to derive the CTQ (critical to quality). The tire conicity and toe angle difference proved to be CTQ. This information enabled the manufacturing process related with the CTQ to be improved. The respective toe angle tolerance for the adjustment process was obtained using the Monte Carlo simulation. Step C verified and controlled the improved results through hypothesis testing and Monte Carlo simulation.