• 한국물환경학회지
• /
• 제20권3호
• /
• pp.301-306
• /
• 2004

The present water quality standards for agricultural were established without considering the effects of water quality on the safety, growth, yield and quality of crops. This study was carried out to investigate the effects of irrigation water quality on the growth, yield, and grain quality of rice, and to acquire basic knowledges to set up water quality standards for irrigation. The field and pot experiments were conducted with irrigation water that was previously adjusted four concentrations (control, 5, 10, 20 mg/L) and six concentrations (control, 5, 10, 15, 20, 30 mg/L) by $NH_4NO_3$ solution and replicated three and four times with randomized block design, respectively. The results of this study showed that the inorganic nutrient of rice plant, rice protein contents and number of panicle tended to increase as the T-N concentration in irrigation water was increased. In addition, grain yield at T-N 10 mg/L and 20mg/L were significantly higher than the control at the field experiment. From the pot experiment at T-N 30 mg/L, the percentage of head rice was slightly lower due to the increase of green kernel and white belly/core kernel.

• 대한약침학회지
• /
• 제24권2호
• /
• pp.59-67
• /
• 2021

Objectives: We aimed to compare the external herbal dispensary (EHD) evaluation criteria for pharmacopuncture and the Korea Good Manufacturing Practice (KGMP) sterile medicine standards to contribute to the establishment of quality control criteria for pharmacopuncture. Methods: We obtained the KGMP standards from the Ministry of Food and Drug Safety and the pharmacopuncture certification criteria from the Ministry of Health and Welfare of South Korea. The EHD evaluation items were classified into three categories: facilities, quality control, and validation. The evaluation items were compared with the KGMP sterile medicine criteria to determine their conformance with each other, followed by a discussion among the committee of six experts and their consensus to suggest the items to complement the EHD evaluation criteria. Results: Among the KGMP sterile medicine criteria, 44 were related to the management of the facilities, and 32 pharmacopuncture evaluation items corresponded to these KGMP items (66.7%). Fifty-eight KGMP criteria were related to quality management, and 42 pharmacopuncture evaluation items corresponded to these KGMP items (72.4%). Twentyfive KGMP sterile medicine criteria were related to validation, and 11 pharmacopuncture evaluation items corresponded to these KGMP items (44.0%). Sixteen items under the pharmacopuncture EHD criteria corresponded to the KGMP sterile medicine criteria based on the consent of the experts. Among these, 4 were related to facility management, 6 were related to quality control, and 6 were related to validation. Conclusion: For the safety and quality control of pharmacopuncture, there is a need to select the criteria for the mandatory items among the proposed pharmacopuncture-EHD criteria laws and systems to ensure that the pharmacopuncture materials are produced under the pharmacopuncture-EHD in compliance with the relevant requirements. More studies are needed to secure the safety level of pharmacopuncture materials corresponding to that of conventional medicine.

• 한국농공학회지
• /
• 제41권2호
• /
• pp.44-54
• /
• 1999

Agricultural water quality standards were reviewed through rice culture using treated sewage irrigation . The seqage from school building of Konkuk University was treated by a constructed wetland system, and theeffluent of the systeml was irrigated for rice culutre after nutrient concentration adjusted by dilution. Average concentration of COD, SS, T-N and T-P in irrigated water was 22.3mg/$\ell$, 6.5mg/$\ell$, 25.8 mg/$\ell$and 2.2mg/$\ell$, respectively. Treatment include irrigation of adjusted effluent with conventional fertilization (TWCF), adjusted effluent with no fertilization (TWNF). and effluent of the wetland system as it was with no fertilization (SWNF). These treatment plots were compared with control plot irrigated by tap water with conventional fertilization (CONTROL). Other environmentals for rice culture were identical for all the plots. Among them, TWCF showed the best growth rate and the highest yield, and constituents in the harvested rice showed not much difference among them. Which implies that irrigation with relatively high nutrient concentration compared to the current water quality standards may cause no adverse effect on rice culture and could be even beneficial . Although T-N for this study was 25 times greater than the current standards, rice culture wasnot adversely affected by irrigatino water quality and even beeter results were observed than the CONTROL. It could be mistakenly that clean irrigation water produces better agricultural product, however, it is not necessarily true. Irrigation water with moderate nutrient concentration can enhance the plant growth, and better result might be expected. Therefore, peer review and modification if necessary are needed to the current agricultural water quality standards, especially for the nutrient components.

• 보건행정학회지
• /
• 제22권3호
• /
• pp.403-426
• /
• 2012

The purpose of this study is to compare the standards and guidelines of long-term care facilities based on the physical environments and human resources in Korea, Japan, USA, and Australia. Ultimately, this study suggests the directions for amendments of long-term care service or running of the facilities in Korea. For achieving this purpose, we reviewed the homepage of national health departments, reports and articles of long-term care service, and acts related with long-term care in each country. This comparisons were carried in terms of physical environments, human resources by long-term care related acts and legal sanctions as means of quality control. This study implies that long-term care service guidelines or standards should be revised for developing the quality of our long-term care services.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.739-743
• /
• 2009

Japan is leading standards for the hydrogen fuel quality on the PEMFC(Proton Exchange Membrane Fuel Cell) vehicle at ISO/TC197/WG12. However, it has many problems to solve the standard of measurement and the test method. because the standard of measurement which was proposed in Japan is too high to reach the technique for many countries. it might not control standards for the hydrogen fuel quality on the PEMFC vehicle in Korea. So we need to develop the study of standards and the technique of measurement continuously for the International Standards Meeting.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.127-128
• /
• 2023

Recently, OSC (off-site construction) construction has been revitalized as a response to the decline in building quality and productivity due to lack of skilled manpower at construction sites, and PC (precast concrete) construction, a representative OSC construction, is insufficiently applied to public housing.This is the situation.In addition, in the case of general contents appearing in standard specifications, the construction standards for quality assurance remain in the 1990s and do not correspond to the current construction environment.In order to improve the quality of PC member joints, we compared and analyzed Korean and Japanese specifications to establish appropriate standards for PC construction quality control, focusing on the quality of grout used in joints.

• 디지털융복합연구
• /
• 제15권6호
• /
• pp.219-227
• /
• 2017

네트워크 접근제어(Network Access Control)를 통해 IT 인프라에 대한 보안위협 즉, 비인가 사용자, 단말의 네트워크 무단 접속, 직원의 내부 서버 불법접근 등을 효과적으로 차단할 수있어야 한다. 이러한 관점에서는 보안성을 충족시키고 있음을 확실히 하기 위해 관련 표준에 기반을 둔 메트릭 구축이 요구된다. 그러므로 관련 표준에 따른 NAC의 보안성 평가를 위한 방법의 체계화가 필요하다. 따라서 이 연구에서는 네트워크 접근제어시스템의 보안성 메트릭 개발을 위해 ISO/IEC 15408(CC:Common Criteria)과 ISO 25000 시리즈의 보안성 평가 부분을 융합한 모델을 구축하였다. 이를 위해 네트워크 접근제어시스템의 품질 요구사항을 분석하고 두 국제표준의 보안성에 관한 융합 평가메트릭을 개발하였다. 이를 통해 네트워크 접근제어시스템의 보안성 품질수준 평가 모델을 구축하고, 향후 네트워크 접근제어시스템에 대한 평가방법의 표준화에 적용할 수 있을 것으로 사료된다.

• 한국건설관리학회논문집
• /
• 제25권1호
• /
• pp.62-72
• /
• 2024

국내 가설기자재의 유통구조상 80% 이상의 가설기자재가 반복되고 재사용되기에 가설기자재에 대한 품질관리는 필수적이다. 이러한 중요성으로 인해 국토교통부는 강재 파이프 서포트 등의 가설기자재를 대상으로 가설기자재 품질관리 기준을 제시하였지만, 샘플링 품질시험으로 품질을 관리하고 있어 전반적인 가설기자재의 품질을 확인할 수 없는 실정이다. 또한, 가설지자재 임대업체를 위한 품질관리 기준이 존재하지만 육안검사에 의한 정성적 검사 기준 위주로 제시되고 있어 실무적 활용성은 매우 낮은 것으로 조사 및 분석되었다. 따라서 본 연구의 목적은 건설현장 반입 이전에 가설기자재의 품질을 선제적으로 확보할 수 있도록 가설기자재 임대업체를 위한 개별 가설지자재 자재/품질/납품관리 기준(Guide)를 개발하는 것이다. 본 연구를 통해 개발된 기준이 국내 가설기자재 임대업체에 적용될 경우, 국내 중·소규모 가설기자재 임대업체의 가설기자재 품질 수준이 제고됨에 따라 품질이 확보된 양질의 가설기자재가 건설현장에 반입되어 가설구조물 관련 안전사고 저감될 수 있을 것으로 기대된다.

• 대한한의학회지
• /
• 제27권3호
• /
• pp.222-226
• /
• 2006

Objective: The aim of this study was to introduce newly developed cooperation group standards of acupuncture needles for single use and to make a contribution to the future development of Korean Industrial Standards (KS) of acupuncture needles for single use. Results and Conclusion: Quality assurance and quality control with high safety profile is one of the most critical issues in medical device manufacturing. Up to now, proper attention has not been paid to this issue with respect to acupuncture needles for single use and their related devices. We, therefore, organized a committee to make guidelines to produce an acupuncture needle with high quality and safety. In the committee, we reviewed the topic from an historical viewpoint, and investigated the current situation of the standardization of acupuncture needles in other developed countries. Finally, we developed the cooperation group standards in advance of development of KS on the acupuncture needles for single use. The standards are composed of 12 sections describing: Scope, Normative references, Definitions, Materials, Configuration, Appearance and Cleanliness, Quality, Sterilization and Safety, Processing of Surface and Coating Material, Test, Packaging, and Labeling. We hope that the standards would be useful guidelines to produce high quality acupuncture needles and play an important role in the development of KS in the future.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.15-27
• /
• 2009

Since domestic offset print quality control depends on the experience of persons in charge rather than objective data, the standards from the data are needed for the well-organized quality management of high-quality prints. Based on the ISO standards, now the standard specifications, such as GRACoL 7, SWOP 11, SNAP, G7 in America, and EURO Color, ECI, BVDM in Europe, and Japan Color 2001, Japan Color 2004 in Japan, are employed. There exists KS for domestic standards. However, since it has been directly imported from ISO Standards, there are discrepancies in printing materials and media. Although the quality management of commercial prints has been focused and studied. For this circumstance, standards are needed for the production of prints to meet international standards. This paper aims to find out suitable ways to approach domestic printing standards using densitometric method and colorimetric method. Printing experiments on this study were performed with domestic process color inks(Cyan, Magenta, Yellow, Black) and domestic coated papers, under the same conditions as the actual commercial printing processes. In densitometric method, how to set up the optimal solid print density was studied through three tests such as the ways to match solid print density and print contrast to GRACoL standards respectively, and the way to get the highest contrast. In colorimetric method, how to get solid print density with the minimum color difference between the $CIEL^*a^*b^*$ color specification values in GRACoL standards and the measured color specification values in prints, was studied.