• 제목/요약/키워드: Quality Check

검색결과 1,027건 처리시간 0.037초

Mechanical Check용 Spherical device의 제작 및 특성 평가 (Practicability Assessment of Spherical Mechanical Check Device(SMCD))

  • 이병구;양대식;권영호;고신관;한동균
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제30권2호
    • /
    • pp.153-159
    • /
    • 2007
  • PACS의 도입에 발맞추어 시작된 digital 의료영상은 현재 방사선 진단 및 치료 영역에서 일반화되었으며 특히 진단영역에서는 눈부신 발전을 거듭하고 있다. 치료영역에서의 digital image 구현은 상대적으로 느린 성장과정을 거쳐 오늘에 이르고 있다. 본 논문은 이러한 analog에서 digital로 변화하는 흐름을 인식하여 정도관리(Quality Assurance) 업무 중 mechanical check 부분을 digital image base 업무로 대체하여 수행하고, 기존의 육면체 또는 사각형틀의 개념을 탈피한 구형(球形)의 Spherical mechanical check device(SMCD) 고안하여 그 실용성을 실험하였다. Source(target)에서 image detecter 간의 거리가 항상 일정하고, Spherical mechanical check device(SMCD)의 중심까지 거리가 일정하다면 어느 방향에서 SMCD를 exposure하더라도 그 크기는 항상 일정하게 영상으로 표현 될 것이다. 이를 위해 정확한 반구(半球)를 2개 정밀 제작하여 그것을 합쳤을 때 정원(正圓)의 구(球)가 되도록 하였다. 이를 이용하여 radiation field와 light field의 일치도, radiation field 크기의 정확도($(5{\times}5,\;10{\times}10,\;15{\times}15\;cm)$), Collimator field 크기의 정확도($5{\times}5,\;10{\times}10,\;15{\times}15\;cm$), Gantry rotation isocenter check, Collimator rotation isocenter check, Room laser accuracy check, Collimator rotation angle check와 Couch rotation angle check 등 기존의 mechanical check를 digital image를 이용하여 실행할 수 있었으며, 기존의 Flat 또는 정육면체 형태의 mechanical check device로는 쉽게 하기 힘든 non-coplanar field에 적용되는 Gantry와 Couch가 동시에 rotation되었을 때 그 isocenter의 일치도를 real time으로 확인할 수 있었다.

  • PDF

고랭지배추 생육을 위한 유비쿼터스 센서 네트워크 품질관리 알고리즘 개발 (Development of Ubiquitous Sensor Network Quality Control Algorithm for Highland Cabbage)

  • 조창제;황근보;윤상후
    • 한국농림기상학회지
    • /
    • 제20권4호
    • /
    • pp.337-347
    • /
    • 2018
  • 농업활동의 위험은 대부분은 기상에 의해 발생한다. 효율적인 농작업을 위해선 기상정보를 활용해야 한다. 현대 농업은 첨단 기술인 ICT와 융합을 통해 고부가가치를 창출하는 방향으로 발전하고 있다. 본 연구에서는 고랭지배추의 효율적인 재배를 위한 USN 관측장비를 통한 기상관측장비의 품질관리 알고리즘을 다룬다. 기상관측에서 정확한 관측이 중요하다. 이를 위해서 기상청에서는 기상관측 장비별로 품질관리 알고리즘을 개발하여 기상정보의 정확성 검증을 통해 정상자료 여부를 판정한 후 이를 활용한다. 연구자료는 2015년부터 2017년까지 3년간 대표적인 고랭지배추 재배지인 안반덕, 귀네미에 설치된 5개 USN 자료이다. 품질관리 알고리즘은 지속성검사, 기후범위검사, 시간변동성검사, 공간분포검사로 구성되어 있다. 마지막으로 본 연구에서 제안하는 품질관리 알고리즘은 기상자료의 공간적 특성을 고려한 잠재적 이상관측 여부도 확인할 수 있다. 또한 품질관리를 거친 자료를 토대로 고랭지배추와 기상관측자료의 상관성을 분석함으로써 효율적 농산업 관리에 도움이 될 것으로 보여진다.

A Study on the Effect of Pair Check Cooperative Learning in Operating System Class

  • Shin, Woochang
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제12권1호
    • /
    • pp.104-110
    • /
    • 2020
  • In the 4th Industrial Revolution, the competitiveness of the software industry is important, and as a solution to fundamentally secure the competitiveness of the software industry, education classes should be provided to educate high quality software personnel in educational institutions. Despite this social situation, software-related classes in universities are largely composed of competitive or individual learning structures. Cooperative learning is a learning model that can complement the problems of competitive and individual learning. Cooperative learning is more effective in improving academic achievement than individual or competitive learning. In addition, most learners have the advantage of having a more desirable self-image by having a successful experience. In this paper, we apply a pair check model, which is a type of cooperative learning, in operating system classes. In addition, the class procedure and instruction plan are designed to apply the pair check model. We analyze the test results to analyze the performance of the cooperative learning model.

Mechanical Check용 Spherical Device의 제작 및 특성 평가 (Practicability Assessment of Spherical Type Mechanical Check Device (SMCD))

  • 이병구;김건오;권영호
    • 대한방사선치료학회지
    • /
    • 제19권1호
    • /
    • pp.55-62
    • /
    • 2007
  • 목 적: PACS의 도입에 발맞추어 시작된 디지털 의료영상은 현재 방사선 진단 및 치료 영역에서 일반화되었으며 특히 진단 영역에서는 눈부신 발전을 거듭하고 있다. 치료영역에서의 디지털 영상 구현은 상대적으로 느린 성장과정을 거쳐 오늘에 이르고 있다. 본 논문은 이러한 아날로그에서 디지털로 변화하는 흐름을 인식하여 정도관리(Quality Assurance) 업무 중 기계적 점검(Mechanical check) 부분을 디지털 영상 기반 업무로 대체하여 수행하고, 기존의 육면체 또는 사각형틀의 개념을 탈피한 구형(球形)의 Spherical type mechanical check device (SMCD)를 고안하여 그 실용성을 실험하였다. 대상 및 방법: 선원에서 영상 detecter 간의 거리가 항상 일정하고, SMCD의 중심까지 거리가 일정하다면 어느 방향에서 방사선으로 SMCD를 조사하더라도 그 크기는 항상 일정하게 영상으로 표현 될 것이다. 이를 위해 Polyester P.E 재질의 정확한 반구(半球) 2개를 자체 제작하여 그것을 합쳤을 때 정원(正圓)의 구(球)가 되도록 하였다. 결 과: SMCD를 이용하여 방사선조사면과 광조사면의 일치도, 방사선조사면 크기의 정확도($5{\times}5$, $10{\times}10$, $15{\times}15cm^2$), Collimator field 크기의 정확도($5{\times}5$, $10{\times}10$, $15{\times}15cm^2$), Gantry rotation isocenter check, Collimator rotation isocenter check, Room laser accuracy check, Collimator rotation angle check와 Couch rotation angle check 등 기존의 기계적 점검을 디지털 영상을 이용하여 실행할 수 있었다. 결 론: 기존의 Flat 또는 정육면체 형태의 기계적 점검 장치로는 쉽게 하기 힘든 non-coplanar field에 적용되는 Gantry와 Couch가 동시에 rotation 되었을 때 그 isocenter의 일치도를 실시간으로 확인할 수 있었다.

  • PDF

8체질(體質) 진단(診斷) 전문가(專門家) 시스템 개발을 위한 기초연구(基礎硏究) (A Fundamental Study for 8 Constitution Medicine Diagnosis Expert System Development)

  • 신용섭;박영배;박영재;김민용;이상철;오환섭
    • 대한한의진단학회지
    • /
    • 제11권1호
    • /
    • pp.25-47
    • /
    • 2007
  • Background and Purpose: There was seldom study about method that diagnose 8 Constitution beside method of pulse diagnosis in 8 Constitution Medicine. Objectives: This study is to make out check list for 8 Constitution Medicine Diagnosis Expert System Development used CBR(Case based Reasoning). Methods: Review of literatures about special quality element of 8 Constitution and supplement learning advice of 8 Constitution Medicine Experts constructed knowledge base. And then, knowledge base divided through AHP(Analytic Hierarchy Process), and made out check list with this. Results: Knowledge base based on special quality element of 8 Constitution was divided by 5 greate classification and 25 bisection kind, and check list consisted of 251 item was made out through this. Conclusion: Based on this research, cases necessary to make 8 Constitution Medicine Diagnosis Expert System can be gathered through check list, and further study for 8 Constitution Medicine Diagnosis Expert System Development used CBR(Case based Reasoning) is needed to supplement this research.

  • PDF

2014년 가을철 이어도 종합과학기지에서의 난류 플럭스의 관측 및 분석 (Observation and Analysis of Turbulent Fluxes Observed at Ieodo Ocean Research Station in Autumn 2014)

  • 윤정희;오효은;하경자
    • 대기
    • /
    • 제25권4호
    • /
    • pp.707-718
    • /
    • 2015
  • This study investigates the characteristics of turbulent fluxes observed at Ieodo Ocean Research Station (IORS) in autumn 2014. The 10 Hz IORS data is quality controlled and calculated to be the 30 minutes turbulent fluxes. The quality control consists of five steps: a weather check, Vickers and Mahrt (VM) sequential check, VM parallel check, flag check, and direction check. Since the IORS is an open-sea station with no orographic influence, there are no significant diurnal variations for the turbulent fluxes and 10 m wind speed. According to stabilities, the unstable and semi-unstable states appear more than 28% and 70% in autumn, respectively and they have strong winds of over $10m\;s^{-1}$. In addition, the turbulent fluxes increase with increasing wind speed. In particular, the latent heat flux and its deviations are clearly shown because the latent heat flux is influenced by the change of both the sea surface roughness and wave height induced by the wind. To demonstrate the changes of the turbulent fluxes before and after typhoon, Vongpong (1419), which is the most intense typhoon affecting the Korean Peninsula in 2014, is considered. The turbulent flux fluctuates in accordance with the location of Vongpong. The turbulent fluxes have a large (small) variation when Vongpong approaches (retreats) at the IORS. The overall results represent that the IORS data helps us understand physical processes related to air-sea interaction by providing the valuable and reliable observed data.

소하천의 오염부하량이 수질에 미치는 영향에 관한 연구 (A Study about the Influence of Pollutant Load on Water Quality in a Small Stream Watershed)

  • 이상훈;조욱상
    • 환경영향평가
    • /
    • 제10권1호
    • /
    • pp.9-19
    • /
    • 2001
  • An intensive watershed survey including water quality measurement of 6 times was carried out in order to find out the relationship between pollutant load and water quality in a small stream watershed where livestock wastewater is the main source of water pollution. The findings from the survey are as follows. 1) The number of livestock showed large disagreement among county office, myon, and insite survey. It is vital to check the data at the beginning of watershed survey. 2) The fluctuation of streamflow and water quality was so large depending on the day of measurement that it is essential to set up continuous telemetering system to get reliable data about delivery ratio of pollutants. 3) It was helpful for setting the priority of investigation to check water quality and quantity at several points along the stream after dividing the watershed into 5 drainage areas. 4) To control the livestock wastewater, especially in case of cows, it is necessary to have roof system and prevent overland flow from the ground. In case of pig farms, it is recommended to have public treatment system instead of private treatment system. The exact emission load of livestock wastewater was difficult to estimate, and requires more study.

  • PDF

여름철 수면시 온열쾌적감 평가 - 제1보 : 수면 전후 설문에 관하여 - (Evaluation of Thermal Comfort during Sleeping in Summer - Part I : On Results of Questionnaire Before and After Sleep -)

  • 김동규;금종수
    • 설비공학논문집
    • /
    • 제17권5호
    • /
    • pp.404-409
    • /
    • 2005
  • This study is to investigate effects of thermal conditions on sleep. Five female university students participated in the sleep experiment. Three temperature levels (22, 26, and $30^{\circ}C$) were given, and relative humidity was maintained to $50\%$. When as subject arrived in the chamber at 9 o'clock in the evening, questionnaire was given to check physical and psychological conditions. After checking conditions, subjects went to bed till 07 : 30 in the morning. Body movement was checked during sleeping. After sleep in the chamber, questionnaire was given to the subject in order to check sleep quality. Subjects evaluated sleep quality by themselves by answering the time they fall asleep and wake up, frequency of wake during sleep, causes of each waking, and feeling after sleep. Sleep quality was rated with 7-point scale. At $30^{\circ}C$ condition, body movement was significantly higher than of other thermal conditions. The best sleep quality was obtained at the $26^{\circ}C$ condition, while the worst sleep was taken at the $30^{\circ}C$ condition.

해양과학기지 시계열 관측 자료 품질관리 시스템 구축: 국제 관측자료 품질관리 방안 수온 관측 자료 시범적용과 문제점 (Quality Control of Observed Temperature Time Series from the Korea Ocean Research Stations: Preliminary Application of Ocean Observation Initiative's Approach and Its Limitation)

  • 민용침;정진용;장찬주;이재익;정종민;민인기;심재설;김용선
    • Ocean and Polar Research
    • /
    • 제42권3호
    • /
    • pp.195-210
    • /
    • 2020
  • The observed time series from the Korea Ocean Research Stations (KORS) in the Yellow and East China Seas (YECS) have various sources of noise, including bio-fouling on the underwater sensors, intermittent depletion of power, cable leakage, and interference between the sensors' signals. Besides these technical issues, intricate waves associated with background tidal currents tend to result in substantial oscillations in oceanic time series. Such technical and environmental issues require a regionally optimized automatic quality control (QC) procedure. Before the achievement of this ultimate goal, we examined the approach of the Ocean Observatories Initiative (OOI)'s standard QC to investigate whether this procedure is pertinent to the KORS. The OOI QC consists of three categorized tests of global/local range of data, temporal variation including spike and gradient, and sensor-related issues associated with its stuck and drift. These OOI QC algorithms have been applied to the water temperature time series from the Ieodo station, one of the KORS. Obvious outliers are flagged successfully by the global/local range checks and the spike check. Both stuck and drift checks barely detected sensor-related errors, owing to frequent sensor cleaning and maintenance. The gradient check, however, fails to flag the remained outliers that tend to stick together closely, as well as often tend to mark probably good data as wrong data, especially data characterized by considerable fluctuations near the thermocline. These results suggest that the gradient check might not be relevant to observations involving considerable natural fluctuations as well as technical issues. Our study highlights the necessity of a new algorithm such as a standard deviation-based outlier check using multiple moving windows to replace the gradient check and an additional algorithm of an inter-consistency check with a related variable to build a standard QC procedure for the KORS.

매칭성능 기반의 지문샘플 품질측정방법에 관한 비교연구 (Matching Performance-Based Comparative Study of Fingerprint Sample Quality Measures)

  • 김장룡;김학일
    • 정보보호학회논문지
    • /
    • 제19권3호
    • /
    • pp.11-25
    • /
    • 2009
  • 지문샘플의 품질은 지문인식 시스템에서 매칭 성능에 영향을 주는 중요한 요소이다. 지문인식 시스템에서 낮은 품질의 지문영상을 제거하면 인식 에러율이 현저하게 줄어드는 것을 알 수 있다. 본 논문에서는 minutiae 기반의 지문인식 알고리즘을 이용하여 단일 샘플 품질 측정방법에 대한 유효성을 평가하였다. 우선, minutiae 기반의 지문인식 알고리즘의 매칭성능에 영향을 주는 여러 가지 요소에 대하여 검증하고, 다음, 현재 흔히 사용하는 측정방법에 대해 연구하고, 그 중 효과적인 품질측정방법들을 선택하여 NIST, QualityCheck와 Verifinger 5.0을 이용하여 비교 분석 하였다. FVC 데이터베이스로 실험한 결과 단일 측정방법도 매칭성능을 효과적으로 향상함을 알 수 있었다.