• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.652-656
• /
• 2007

The major streams in South Korea have established the TMDL(Total Maximum Daily Loads) regulation for just 4 years. Traditional concepts in water quality management in South Korea are based upon the selection of a design streram flow which is 10-year averged flow exeedance probability 75%(Q275). That is, a single flow value based upon average long term flow conditions is chosen for application in dilution calculations, permit design, water quality modeling, etc. While these TMDLs seems to satisfy the requirement of the target water quality regulations, they have contributed little to any watershed/waterbody assessment and restoration plans. These types of TMDLs do little to characterize the problems the TMDLs are intended to address. For TMDLs to be more beneficial in the assessment and implementation process, TMDLs should reflect adequate water quality across flow conditions rather than at a single flow value such as average daily flow. In this paper, we developed LDC (load duration curve) methodology for theevaluation of Korean TMDL evaluation based on watershed scaled, physically based on SWAT(Soil and Water Assessment Tool) model.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2010.05a
• /
• pp.5-5
• /
• 2010

Selection of specific medicinal sources as well as bioactive compounds is important for the preparation of medicine and related products with good quality. It is necessary to pay close attention for choosing correct medicinal sources, particularly in case of medicinal plants, because of their diversity, which can affect the quality and efficacy of medicine. Discrimination of plants based on morphological or genetic characteristics has been used as a conventional classification method of pharmaceutical sources so far; however, more need demands more general methods for accurate quality assessment of medicinal plants. In this study, ultra performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC/Q-TOF MS) technique applied to this metabolic profiling is a powerful tool due to its higher sensitivity, resolution, and speed compared to conventional HPLC technique. The metabolite profiling of several medicinal plants including Panax ginseng was carried out using UPLC/Q-TOF MS and total metabolites were then subsequently applied to various statistical tools to compare the patterns. The developed metabolomics tool with UPLC/Q-TOF MS successfully identified and classified the samples tested according to their origins.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.693-703
• /
• 2012

Load Duration Curve(LDC) is a useful tool for analyzing water quality characteristics under various stream flow conditions. This study investigated the methods to identify impaired waterbodies in the assessment of water quality goal attainment by using LDC for the management of Total Maximum Daily Loads (TMDLs). Three methods were proposed. Non-typical regime exclusion method is a method to exclude water quality observations in the non-typical extreme flow conditions in order to minimize the influence of non-ordinary water quality. Flow regime weighted average method is a method to calculate weighted mean water quality instead of arithmetic mean in order to consider water characteristics properly on stream flow regime in addition to the effect of Non-typical regime exclusion method. Load exceeded interval comparison method is a method to compare the intervals between the attained and non-attained load duration periods on the LDC. The assessment of water quality goal attainment can be performed more reasonably and precisely considering water quality variations on stream flow conditions by applying these proposed methods.

• Journal of Environmental Impact Assessment
• /
• v.20 no.4
• /
• pp.575-583
• /
• 2011

In this study, the plausible grid size was estimated to increase for efficiency of reservoir management using 3 dimensional water quality model. To validate utilization of a real time water quality management tool, ELCOM-CAEDYM model was applied to Soyang reservoir in korea. 100m grid size can represent the real topography and take out exact analysis results. $400{\times}400m$ grid can be easily used to analysis because of data capacity. Consequently, the grid size of 200m or 300m was recommended to establish 3D model considering the required simulation time and the irrelevance between horizontal grid size and vertical distribution for temperature and turbidity analysis.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.247-254
• /
• 2012

Soil and Water Assessment Tool (SWAT) model has been widely used in estimation of flow and water quality at various watersheds worldwide, and it has an auto-calibration tool that could calibrate the flow and water quality data automatically from thousands of simulations. However, only continuous measured day flow/water quality data could be used in the current SWAT auto-calibration tool. Therefore, 8-day interval flow and water quality data measured nationwide by Korean Ministry of Environment (MOE) could not be used in SWAT auto-calibration even though long-term flow and water quality data in the Korean Total Maximum Daily Load (TMDL) watersheds available. In this study, current SWAT auto-calibration was modified to calibrate flow and water quality using 8-day interval flow and water quality data. As a result of this study, the Nash and Sutcliffe Efficiency (NSE) values for flow estimation using auto-calibration are 0.77 (calibration period) and 0.68 (validation period), and NSE value for water quality (T-P load) estimation (using the 8-day interval water quality data) is 0.80. The enhanced SWAT auto-calibration could be used in the estimation of continuous flow and water quality data at the outlet of TMDL watersheds and ungaged point of watersheds. In the next study, the enhanced SWAT auto-calibration will be integrated with Web based Load Duration Curve (LDC) system, and it could be suggested as methods of appraisal of TMDL in South Korea.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.3
• /
• pp.73-85
• /
• 2005

Natural disturbance and environmental pressure on natural ecosystems are gradually increasing, and the cause is significantly related to large-scale environmental pollution, global warming, decreasing biodiversity and habitat fragmentation. Environmental impact assessment(EIA) in Korea has been focused on distribution and composition of fauna and flora as major evaluation aspects in ecosystem assessment. It is well known that those characteristics of flora and fauna strongly depend on characteristics and quality of habitat and ecosystem. However, there is no items to assess habitat and ecosystems of spatial ecological system in EIA. Many countries are trying to develop the EIA items to consider the spatial characteristics of habitat and ecosystem and those ecological dynamics as well as species level. In this stream, landscape ecology is emerging discipline to examine spatial pattern and ecological process within/between habitats and ecosystems. Landscape ecological analysis, as a special tool for ecosystem evaluation, has been appropriately adopted to the EIA system in the advanced countries. This review paper tries to introducing the possibilities of landscape ecological concept into the Korean EIA system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.777-785
• /
• 2016

Engineering education accreditation addresses evaluation for program outcomes according to educational objectives and assessment process, which students are expected to obtain by the time of graduation in order to train international competitive engineers with continuous quality improvement in engineering programs. This paper shows a case study of a program outcomes assessment system including performance criteria, evaluation process, document system and continuous quality improvement process and an achievement evaluation by the assessment system for program outcomes in Information Security Program of Hoseo university.

• Journal of Korean Clinical Nursing Research
• /
• v.17 no.2
• /
• pp.123-137
• /
• 2011

Purpose: This study was conducted to develop standards ensuring nursing process-based care of patient admission and discharge, to develop a performance measurement tool evaluating the care applied according to the standards, and finally to determine validity of the standards and the tool. Methods: The standards and the tool were reviewed by a panel of experts and refined based on the panel's suggestions. Validity of the standards and the tool were examined through surveying a total of 302 hospital nurses. Results: The mean validity scores of the performance measurement standards and the tool were 4.11 and 4.09, respectively, out of 5.00. So the performance measurement standards and the tool in this study were found to be acceptable in evaluating quality of nursing care provided at patient admission and discharge. Conclusion: This result indicates that the performance measurement standards and the tool developed in this study are valid instruments to monitor and improve quality of nursing care for patient admission and discharge.

• Imaging Science in Dentistry
• /
• v.41 no.1
• /
• pp.1-6
• /
• 2011

Purpose : The purpose of this review is to evaluate the possibility of panoramic radiography as a national oral examination tool. Materials and Methods : This report was carried out by review of the literatures. Results : Panoramic radiography has sufficient diagnostic accuracy in dental caries, periodontal diseases, and other lesions. Also, the effective dose of panoramic radiography is lower than traditional full-mouth periapical radiography. Conclusion : Panoramic radiography will improve the efficacy of dental examination in national oral examination. However, more studies are required to evaluate the benefit, financial cost, and operation time and also to make selection criteria and quality management program.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.29-40
• /
• 2006

The paper presents an optimization system which integrates a parametric design tool, 3D diffraction-radiation analysis and hydrodynamic performance assessment based on short and long term wave statistics. Controlled by formal optimization strategies the system is able to design offshore structure hulls with superior seakeeping qualities. The parametric modeling tool enables the designer to specify the geometric characteristics of the design from displacement over principal dimensions down to local shape properties. The computer generates the hull form and passes it on to the hydrodynamic analysis, which computes response amplitude operators (RAOs) for forces and motions. Combining the RAOs with short and long-term wave statistics provides a realistic assessment of the quality of the design. The optimization algorithm changes selected shape parameters in order to minimize forces and motions, thus increasing availability and safety of the system. Constraints ensure that only feasible designs with sufficient stability in operation and survival condition are generated. As an example the optimization study of a semisubmersible is discussed. It illustrates how offshore structures can be optimized for a specific target area of operation.