• Journal of radiological science and technology
• /
• v.21 no.1
• /
• pp.29-34
• /
• 1998

The purpose of simple abdomen erect projection is to see the fluid level which indicates gastrointestinal ileus or free air due to perforation. we do not have to insist on low kVp technique in simple abdomen erect position as long as we can detect the fluid level and free air shadow. Therefore, the author tried to decrease patient dose by high kVp technique and to improve the image quality due to motion artifact by reduction of exposure time. [Methods] Experiment 1. * screen/film SRO1000/HRH * exposure factor : $140\;kvp{\pm}5\;kv$ with added filters, 200 mA, 0.01 sec * phantom : Acryles : 15.0 cm(equivalent to 17 cm body thickness) 17.5 cm(equivalent to 21 cm body thickness) 20.0 cm (equivalent to 25 cm body thickness) With the exposure factor for same film density($D=0.8{\pm}0.1$) and with the materials above, we tried to find out entrance skin dose and gonad dose for both male and female. Experiment 2. Burger's phantom radiography were checked to see whether there was any change of image quality according to the kVp and the added filters. Experiment 3. Using rotating meter(self made), we examined the motion artifact and the exposure time limitation. [Results and conculution] 1. Using high voltage technique of 140 kVp with added filter, Skin dose, testicle dose and ovary dose decrease to 89.3%, 47% and 71.4% respectively compare to 70 kVp technique, 2. No great changes of Burger's phantom image has detected as from 70 kVp to 140 kVp and the air hole size of Burger's phantom over 0.028 cc(Diameter 3 mm, hight 4 mm) can be distinghished. 3. 0.01 sec(1 pulse) exposure time is possible in the single phase full wave rectification that why we can quitely reduce the unsharness caused by patient's movement.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.488-494
• /
• 1988

Effects of MnO2 addition on themicrostructure, dielectric and piezoelectric properties of Rhombohedral, Tetragonal and Morphotropic phase boundary(MPB) in Pb(Ni1/3Nb2/3)O3-PbTiO3-PbZrO3 system were investigated and respectively the amount of MnO2 addition was 0, 0.2, 0.5, 1.0, 3.0wt%. In the tetragonal region, compared with the Rhombohedral and Morpotropic phase boundary, Mechanical quality factor(Qm), Curie temperature(Tc) and Dissipation factor were promoted by addition of MnO2. According to the results of the microstructure, dielectric and piezoelectric properties, the solid solution range of MnO2 addition in this system was 0.2-0.5wt%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1989.06a
• /
• pp.70-73
• /
• 1989

(1-x-y)Pb($Zn_{1/3}Nb_{2/3})O_3-Ba(Zn_{1/3}Nb_{2/3})O_3-PbTiO_3(0.12{\leq}x{\leq}0.21, 0.24{\leq}y{\leq}0.33$) ternary compound ceramics were fabricated by the mixed oxide method. The sintering temperature and time were 1050 [$^{\circ}C$], 2[hr]. Morphotropic phase boundary region was chosen for the composition. 0.55 PZN-0.21 BZN-0.24 PT specimen had the highest value of relative dielectric constants, 5353. The curie temperature of specimens were increased linearly with PT content. Near the morphotropic phase boundary, electro-mechanical coupoling factor and mechanical quality factor of the specimens had the highest values.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.157-159
• /
• 2005

In this study, in order to develop Pb-free piezoelectric ceramics, $[Li_{0.04}(Na_{0.44}K_{0.52)-(Nb_{0.86}Ta_{0.10}Sb_{0.04})]O_3$ ceramics were fabricated by conventional mixed oxide method and their piezoelectric characteristics were investigated according to the poling condition. The transition temperature from orthorhombic phase to tetragonal phase observed at $93[^{\circ}C]$ and Curie temperature was $346[^{\circ}C]$. At $50[^{\circ}C]$ poling temperature, dielectric constant, electromecha nical coupling factor kp, piezoelectric $d_{33}$ const ant, coercive field Ec, remanant polarization Pr and mechanical quality factor Qm showed the optimum value of 737, 0.45, 209[pC/N], 1l.34[kV/cm], $7.14[{\mu}C/cm^2]$ and 205, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.331-334
• /
• 1998

The solid solutions of the Pb(Sc$\_$0.5/Nb$\_$0.5/)$\_$0.57/Ti$\_$0.43/O$_3$ system were prepared. In the PSNT system, it had been known that two-phase region between the rhombohedral and tetragonal phases was observed between 0.425 of PT at room temperature. In this paper, Fe$_2$O$_3$-doped 0.57PSN-0.43PT composition was prepared by conventional method. The dielectric and strain properties were examined using an computerized measuring apparatus, and the resonance characteristics were measured using an impedance gain phase analyzer. We got the data of dielectric constant, dielectric loss, piezoelectric coefficient, piezoelectric voltage coefficient, frequency constant strain constant mechanical quality factor and electromechanical coupling factor.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.4
• /
• pp.199-212
• /
• 2011

This study examined the influence of fashion product consumer's relationship benefit on relationship quality in the internet shopping mall. Also consumer's relationship benefit perception and relationship quality are identified in terms of consumer's relationship tendency(relationship period, relationship intensity). Survey research was conducted from November 1, 2011 to November 12, 2011 in people living in Seoul and other metropolitan areas who had purchased fashion products in the internet shopping mall. 620 useful data were analyzed by factor analysis, reliability analysis, multiple regression, t-test, ANOVA and duncan test using SPSS 17.0. The results were as follows: Relationship Benefit perceived by fashion product consumer was categorized into three factors including "economic benefit", "psychological benefit", "informational benefit". Each factor of relationship benefit had a significant influence on customer satisfaction, trust, and commitment. As for consumer's relationship benefit perception according to the relationship period for internet shopping mall, the consumer who had used the internet shopping mall longer perceived relationship benefit factors higher than shorter using consumer. As for relationship quality, there was a significant difference only in customer satisfaction according to consumer's relationship period for internet shopping mall, Relationship benefit factors and relationship quality showed Significant differences according to the degree of relationship intensity perceived by consumer in the internet shopping mall.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.113-121
• /
• 2016

In this study, the basic concept of service profit chain was introduced based on the existing studies related to service quality of airline ground crew to find out how are customer satisfaction influenced by factors related to employees who provide service quality to the customers, such as internal service quality and job satisfaction. The data of this study was collected by questionnaire and based on airline ground crews and Gimpo international airport users. A total of 190 of airline ground crew and 273 of passengers validity sample was analyzed a frequency analysis, reliability analysis, exploratory factor analysis and correlation coefficient analysis from SPSS 21, a hypothesis through out confirmatory factor analysis and structural equation modeling from AMOS 7.0. As a result of the analyses, it was found that the models was appropriate in proving the hypotheses on interrelationships among internal service quality, job satisfaction and customer satisfaction. Overall, finding of this study enhance the theoretical progress on the experiential concept in walking tour and offer important implication for airline industry marketers.

• Korean Journal of Community Nutrition
• /
• v.7 no.1
• /
• pp.130-140
• /
• 2002

The purpose of this study was to examine the customer’s perception of the importance of restaurant quality by using a developed SERVQUAL model. In particular, it was intended to provide the basic information for nutrition education for family’s eating out. the data were collected through the survey over 440 families who have lived around the apartments in Kyongju and Seoul. The structure questionnaire included 35 items evaluating the quality of restaurants, adapting SERVQUAL model and adding other factors related to restaurant and the general characteristics of the families. The data were analyzed using SPSS 10.0 WIN program for descriptive analysis, a chi-square test and Pearson’s correlation test. The major results were as follows: From the factor analysis, the 35 items related to the quality of restaurant have been categorized into 10 factors, ie., ‘Health’, ‘Reliability’, ‘Employee’, ‘Food’, ‘Facilities’, ‘Product’, ‘Empathy’, ‘Access’, ‘Comfort’, and ‘Safety’. From the analysis of the correlation between family life cycle of four steps and 10 factors, four factors such as ‘Health’, ‘Facilities’ (p<0.001), ‘Comfort’ (p<0.01) and ‘Product’ (p<0.05) showed statistical significance. ‘Health’ and ‘Product’ factors marked the highest score in the family with senior couple live without children or single, but the lowest score in the family with young couple without children or single. ‘Facilities’ and ‘Comfort’ factors showed the highest scores in the family with under elementary school children, and the lowest scores in the family with over elementary school children.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.255-259
• /
• 2016

Background: Reliable and validated instruments are needed in order to study the quality of life in myeloma patients. This study aimed to translate and explore the psychometric properties of the European Organisation for Research and Treatment of Cancer (EORTC) myeloma module (QLQ-MY20) in Iranian patients. Materials and Methods: Two hundred and fifteen patients with multiple myeloma (MM) were recruited from Imam Khomeini Hospital, Tehran. A standard forward-backward translation procedure was implemented. Participating patients were asked to complete the EORTC QLQ-C30 and the QLQ-MY20 three times, at study entry, after two weeks, and again after three months. Data were tested for the range of measurement, internal consistency, test-retest reliability, known group comparison, responsiveness and factor structure. Results: Mean age of the patients was 60.7 years. No floor and ceiling effects were seen for the QLQ-MY20. Cronbach's ${\alpha}$ was greater than 0.80 for all three multi-item scales (ranging from 0.82 to 0.93). All four scales had test-retest reliability of 0.85 or greater. Results of the confirmatory factor analysis that the hypothesized 3-scale measurement model of the QLQ-MY20. Moreover, the Persian version for the QLQ-MY20 differentiated between subgroups of the patients in terms of beta-2 microglobulin, fracture and performance status. The responsiveness of the QLQ-MY20 to change over time was confirmed within 3 months. Conclusions: the results of our study indicate that our Iranian version of the QLQ-MY20 is a feasible, reliable and valid questionnaire for assessing the condition-specific quality of life of patients with MM.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.589-596
• /
• 2019

X-rays used for diagnosis have a continuous energy distribution. However, photons with low energy not only reduce image contrast, but also contribute to the patient's radiation exposure. Therefore, clinics currently use filters made of aluminum. Such filters are advantageous because they can reduce the exposure of the patient to radiation. However, they may have negative effects on imaging quality, as they lead to increases in the scattered dose. In this study, we investigated the effects of the scattered dose generated by an aluminum filter on medical image quality. We used the relative standard deviation and the scatter degradation factor as evaluation indices, as they can be used to quantitatively express the decrease in the degree of contrast in imaging. We verified that the scattered dose generated by the increase in the thickness of the aluminum filter causes degradation of the quality of medical images.