• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.831-836
• /
• 2007

This paper proposes an optimal galloping trajectory which costs low energy and guarantees the stability of the quadruped robot. In the realization of the fast galloping, the trajectory design is important. As a galloping trajectory, we propose an elliptic leg trajectory, which provides simplified locomotion to complex galloping motions of animals. However, the elliptic trajectory, as an imitation of animal galloping motion, does not guarantee stability and minimal energy consumption. We propose optimization based on the energy and stability using a genetic algorithm, which provides the robust and global solution to a multi-body, highly nonlinear dynamic system. To evaluate and verify the effectiveness of the proposed trajectory, computer simulations were carried out.

• The Journal of Korea Robotics Society
• /
• v.2 no.4
• /
• pp.353-360
• /
• 2007

This paper proposes the trot gait pattern generation and online control methods for a quadruped robot to carry heavy loads and to move fast on uneven terrain. The trot pattern is generated from the frequency modulated pattern generation method based on the frequency modulated oscillator in order for the legged robots to be operated outdoor environment with the static and dynamic mobility. The efficiency and performance of the proposed method are verified through computer simulations and experiments using qRT-1/-2. In the experiments, qRT-2 which has two front legs driven by hydraulic linear actuators and two rear casters is used. The robot can trot at the speed up to 1.3 m/s on even surface, walk up and down the 20 degree inclines, and walk at 0.7 m/s on uneven surface. Also it can carry over 100 kg totally including 40 kg payload.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.614-620
• /
• 2009

The force distribution in multi-legged robots is a constrained, optimization problem. The solution to the problem is the set points of the leg contact forces for a particular system task. In this paper, an efficient and general formulation of the force distribution problem is developed using linear programming. The considered walking robot is a quadruped robot with a locked-joint failure, i.e., a joint of the failed leg is locked at a known place. For overcoming the drawback of marginal stability in fault-tolerant gaits, we define safety margin on friction constraints as the objective function to be maximized. Dynamic features of locked-joint failure are represented by equality and inequality constraints of linear programming. Unlike the former study, our result can be applied to various forms of walking such as crab and turning gaits. Simulation results show the validity of the proposed scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.104.3-104
• /
• 2002

A quadruped stair robot introduced here plays a role in monitoring and moving some place where an operator can not reach or when he may not keep watching. It has several features that travels and poses variable position by four caterpillars and quadruped typed arms, transmits an image and command data via RF wireless and network communication. The robot can balance itself when it moves up and down on a slope by using the quadruped mechanism. The robot vision scans ahead before it moves, and the captured image is transferred to a main computer via a RF image module. The main computer analyzes the obstacle, and when it is found the obstacle, the robot avoids from the obstacle and keep moving f...

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.105.1-105
• /
• 2002

$\textbullet$ This paper deals with obstacle avoidance of a quadruped robot with a vision system and a PSD sensor. $\textbullet$ The vision system needs for obstacle recognition toward robot. $\textbullet$ Ths PSD sensor is also important element for obstacle recognition. $\textbullet$ We propose algorithm that recognizes obstacles with one vision and PSD sensor. $\textbullet$ We also propose obstacle avoidance algorithm with map from obstacle recognition algorithm. $\textbullet$ Using these algorithm, Quadruped robot can generate gait trajectory. $\textbullet$ Therefore, robot can avoid obstacls, and can move to target point.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.888-893
• /
• 2008

In This paper proposes the control algorithm for quadruped robots on irregularly sloped uneven surface. Body balance is important in stable running locomotion. Since the body balance is determined by the forces applied at the feet during touchdown phase, the ground reaction force is controlled for stable running. To control the forces at each foot, the desired force is generated. The generated desired force is compared with actual contact force, then, the difference between them modifies the foot trajectory. The desired force is generated by combination of the rate change of the angular and linear momentum at flight. Then the rate change of momentum determines each force distribution. The distribution of the force is carried out by fuzzy logic. The computer simulation is carried out with the commercial software RecurDyn$^{(R)}$. Dynamic model simulation program show that the stable running on the irregularly sloped uneven surface are accomplished by the proposed method.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.894-899
• /
• 2008

Measured sensor datum from a quadruped robotics is commonly used for recognizing physical environment information which controls the posture of robotics. We can advance the ambulation with this sensed information and need to synthesize various sensors for obtaining accurate data, but most of these sensors are expensive and require excessive load for the operation. Those defects can be serious problem when it comes to the prototype's practicality and mass production, and maintenance of the system. This paper suggests virtual sensor technology for avoiding previous defects and presents ways to apply a theory to a walking robotics through virtual sensor information which is trained with several kinds of actual sensor information from the prototype system; the general algorithm is initially based on the neural network theory of back propagation. In specific, we verified a possibility of replacing the virtual sensor with the actual one through a reaction force measurement experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.42-42
• /
• 2000

This paper concerns an efficient aperiodic static crab walking algorithm for quadruped walking machine in rough terrain. In this algorithm, the requirements for forward stability margin and backward stability margin could be given differently in order to consider the slope of terrain and disturbances resulting from moving velocity. To restrict the searing regions for motion variables, such as moving distances until a leg is lifted or is placed, the standard leg transferring sequence is decided to be that of wave gaits. standard support pattern is also proposed that enables the quadruped to continue forward motion using the standard leg transferring sequence without falling into deadlock.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.2
• /
• pp.329-338
• /
• 1994

This paper presents a novel method of path planning for a quadruped walking robot on irregular terrain. In the previous study on the path planning problem of mobile robots, it has been usually focused on the collision-free path planning for wheeled robots. The path planning problem of legged roboth, however, has unique aspects from the point of viw that the legged robot can cross over the obstacles and the gait constraint should be considered in the process of planning a path. To resolve this unique problem systematically, a new concept of the artificial intensity field of light is numerically constructed over the configuration space of the robot including the transformed obstacles and a feasible path is sought in the field. Also, the efficiency of the proposed method is shown by various simulation results.

• The Journal of Korea Robotics Society
• /
• v.13 no.2
• /
• pp.86-91
• /
• 2018

This paper presents about design efforts of a human-sized quadruped robot leg for high energy efficiency, and verifications. One of the representative index of the energy efficiency is the Cost of Transport (COT), but increased in the energy or work done is not calculated in COT. In this reason, the input to the output energy efficiency should be also considered as a very important term. By designing the robot with customized motor housing, small rotational inertia, and low gear ratio to reduce friction, high energy efficiency was achieved. Squatting motion of one leg was performed and simulation results were compared to the experimental results for validation. The developed 50 kg robot can lift the weight up to 200 kg, and during squatting, it showed high energy efficiency. The robot showed 71% input to output energy efficiency in positive work. Peak current during squatting only appears to be 0.3 A.