• 한국가구학회지
• /
• 제21권4호
• /
• pp.284-292
• /
• 2010

This research was carried out to examine the properties of fancy cherry veneer overlaid on the PF resin bonded Meranti plywood floor, which 2.5% green tea leaf powder was applied in the UV varnishes and the adhesives for scavenging the volatile organic compounds. The results were as follows: 1. The various properties of the treated samples, such as density, moisture content, thickness swelling, bending strength(MOR), adhesion shear strength, surface abrasion, curling, cyclic delamination test with boiling water, boiling property, cold-resistance and heat resistance, acid resistance and alkali resistance, and anti-contamination property showed no significant difference between the properties of the control samples. 2.5% green tea leaf powder treated floor gave a little better results than the control for surface scratch test. 2. In case of QUV and weathering test, no difference between the treated sample and control was found. 3. The floor was discolored by adding 10% green tea leaf powder to UV coating, and the floor was also discolored to light green during by the soaking test. The color of floor was not changed up to 5% addition level.

• 한국표면공학회지
• /
• 제47권3호
• /
• pp.137-146
• /
• 2014

The important drawback of epoxy electrodeposition(ED) coatings is the lack of the weathering resistance caused by the structure of bisphenol A. To improve this yellowing phenomena, acryl ED coatings have been developed. Compared with the epoxy ED coatings, however, acryl ED coatings are relatively weak in the corrosion resistance and mechanical properties. The purpose of this study is complemented their drawbacks by mixing epoxy and acryl ED paints. The salt spray, accelerated weathering test(QUV) and cupping, bending, impact test were employed to investigate the corrosion resistance, weathering resistance, and mechanical properties of ED coatings. When the ratio of acryl to epoxy resin of ED coating is 0.33, the weathering resistances are appropriately improved in condition maintaining the corrosion resistance. It was shown that the weathering resistance for epoxy ED coating was adjusted by optimally mixing acryl ED paint.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.461-469
• /
• 2010

Polyurethane adhesive is used in various fields as flexible packaging materials including a food packaging field. Therefore, the purpose of this study is synthesis of polyurethane adhesive which uses aliphatic isocyanate, and compares with aromatic isocyanate. The isocyanates for this test are toluene-2,4-diisocyanate(TDI), hexamethylene diisocyanate(HDI), 4,4-dicyclohexyl ethane diisocyanate($H_{12}MDI$), and isophorone diisocyanate(IPDI). And, the effect of any other diisocyanate are evaluated by several methods as for curing rate test, accelerate weathering test, and peel strength test. The polyurethane adhesive using curing catalyst and HDI has adhesion strength of about 560 g/15 mm between aluminium foil and nylon, about 1,520 g/15 mm between nylon and CPP. Those parameters are similar to polyurethane adhesive with TDI. Also, in case of curing rate, those are similar to TDI type polyurethane adhesive. Moreover, data of ${\Delta}E$ as color variation by QUV tester is equal to 4.12, as 48% against those of TDI type.

• 한국응용과학기술학회지
• /
• 제25권1호
• /
• pp.1-14
• /
• 2008

To prepare weather-resistant modified silane acrylic resin coatings for an architectural purpose, tetrapolymers were synthesized by radical polymerization. 3-Methacryloxypropyltrimethoxysilane (MPTS) as a silicone monomer and n-butyl acrylate, methyl methacrylate, and n-butyl methacrylate as acrylic monomers were used. The composition of monomers was adjusted to fix the glass transition temperature of acrylic polymer for $20^{\circ}C$. The composition of MPTS in the synthesized polymer were varied from 10 wt% to 30 wt%. On the basis of synthesized resin amber paints were prepared and their physical properties and effects on weatherability were examined. The presence of MPTS in modified silane acrylic resins generally resulted in low molecular weight and broad molecular weight distribution, and also lowered the viscosity of the copolymers. The coated films prepared from these resins showed good and balanced properties in general. Adhesion to the substrate was outstanding in particular. Weatherability tests were carried out in three different types such as outdoor exposure, QUV, and SWO. The test results showed that the modified silane acrylic resins containing 30 wt% of MPTS had superior weathering properties.