• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.108-112
• /
• 2005

We investigated temperature behavior of superconducting fault current limiters (SFCLs) during quenches. Knowledge on temperature behavior during quenches is important to the design of SFCLs, because the temperature of SFCLs is related to their stability. SFCLs were fabricated by patterning $Au/YBa_2Cu_3O_7$ thin films grown on sapphire substrates into meander lines by photolithography. A gold film grown on the back side of the substrate was patterned into a meander line, and used as a temperature sensor. The front meander line was subjected to simulated AC fault currents, and the back line to DC current. They were immersed in liquid nitrogen during the experiment for effective cooling. Overall, temperature at the back side of SFCLs was close to that at the front side. It was closer at the beginning of faults, and at lower applied voltages. Temperature distribution at the back side was even except at the edge, as at the front side. These results tell that the whole SFCL was heated to similar degree during quenches, and that effective cooling of SFCLs at the back side is as important to the stability of SFCLs as at the front side. The results could be explained with the concept of heat transfer within the film.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.128-131
• /
• 2004

The resistive superconducting fault current limiters (SFCLs) are very attractive devices for the electric power network. But they have some serious problems when the YBCO thin films were used for the current limiting materials due to the in homogeneities caused by manufacturing process. When the YBCO films have some inhomogeneities, simultaneous quenches are difficult to achieve when the fault current limiting units are connected in series for increasing operating voltage ratings. Magnetic field application is one of the prospective way of inducing simultaneous quenches far the series-connected resistive FCL components. Magnetic field was typically generated by the fault current thorough a coil, which is connected to components of the fault current limiter in series, leaving the problem, which provides significant inductance to the power line and suppresses critical current density of the superconducting components. In this article we investigated the possible application of the protective current transformer (p-CT), which is available current source to the magnetic coil. This system inductively coupled to the circuit, therefore, remarkably reducing impedance to the circuit. The current by the protective current transformer was directly fed to the coil, generating magnetic field large enough to reduce critical current density of the components. This successfully induced simultaneous quenches of the series-connected resistive FCL components.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권1호
• /
• pp.7-11
• /
• 2020

As demand for electricity in urban areas increases, it is necessary to improve electric power stability by interconnecting neighboring substations and high temperature superconductor (HTS) power cables are considered as a promising option due to its large power capacity. However, the interconnection of substations reduces grid impedance and expected fault current is over 45 kA, which exceeds the capacity of a circuit breaker in Korean grid. To reduce the fault current below 45 kA, a HTS power cable having a fault current limiting (FCL) function is considered by as a feasible solution for the interconnection of substations. In this study, a FCL HTS power cable of 600 MVA/154 kV, transmission level class, is considered to reduce the fault current from 63 kA to less than 45 kA by generating an impedance over 1 Ωwhen the fault current is induced. For the thermal design of FCL HTS power cable, a parametric study is conducted to meet a required temperature limit and impedance by modifying the cable core from usual HTS power cables which are designed to bypass the fault current through cable former. The analysis results give a minimum cable length and an area of stainless steel former to suppress the temperature of cable below a design limit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.57-58
• /
• 2008

Recently, several kinds of superconductivity applications are implemented and evaluated in the utility power networks. The protection system for HTS(High Temperature Superconducting) power devices safe operation has not been established yet. For the protection of the HTS apparatus, a better understanding of the quench properties against fault current and appropriate protection devices are required. In this study, an algorithm of protection system is developed with respect to HTS power cable. The protection system of HTS power cable was analyzed in the simulated power system. Results obtained from simulation will provide much more decisive data in order to design a certain superconducting power device, and can give a good information for the installation in power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.832-833
• /
• 2008

초전도 한류 소자의 퀜치 특성은 인가 전압의 크기와 시간에 의존한다. 본 연구에서는 사파이어 기판 위에 박막 형태로 증착된 Au/YBCO의 퀜치 거동을 조사하기 위하여 임의 시간의 고장전류를 인가하고 이 때 발생하는 온도를 검출하여 그 특성을 조사하였다. 시험에 사용된 한류소자는 Au/YBCO/사파이어 기판으로 구성되었으며, 길이 19cm, 폭 2 cm의 stripe 형태를 갖는 초전도 박막이었다. 임계전류는 200A이며 6 주기 동안의 전압인가에 대하여 6 V/cm (상승온도 250 K 기준)의 정격전압을 보였다. 이러한 특성을 갖는 한류소자의 한류 시 온도증가를 조사하기 위하여 한류소자의 뒷면에는 은 박막을 적절한 패턴으로 증착하여 온도 센서로 사용하였으며, 이를 통하여 퀜치 거동을 파악하고자 하였다. 실험 결과, 한류 소자 양단에 250 V의 전압을 인가하고 2 ms 동안 사고 전류를 인가하였을 때, 초전도 박막의 온도는 154 K까지 증가하였으며 다시 초전도성을 회복하기까지의 시간은 약 420 ms가 소요됨을 확인할 수 있었다.

• 한국응용과학기술학회지
• /
• 제37권5호
• /
• pp.1314-1322
• /
• 2020

Sports drinks help optimize and improve performance by delaying and eliminating the buildup of fatigue-causing substances in the body during exercise. Saengmaeg-san is a nature-friendly traditional beverage that has no side effects on the human body and can quench thirst. However, studies on the relationship between exercise ability and Saengmaeg-san are insufficient. The purpose of this study was to prescribe Saengmaeg-san during the summer training period of 4 weeks and to analyze the effect on body composition and exercise performance. Seventeen male participants were divided into 3 groups (Saengmaeg-san acid intake group [n=9], placebo group [n=8]), and body composition (height, weight, muscle mass, fat mass, BMI) and conducted exercise performance (total exercise time and HRmax). In our study, Saengmaeg-san intake had a positive effect on exercise performance, such as decreased body fat percentage, increased exercise time, and decreased HRmax. Therefore, Saengmaeg-san showed the potential as a sports drink. In the future, additional studies on fatigue-related substances, immune function-markers, and blood lipids are needed in order to clearly explain the change in exercise performance due to consumption of Saengmaeg-san.

• BMB Reports
• /
• 제43권11호
• /
• pp.766-771
• /
• 2010

The biological evaluation of a new synthesized Pt(II)-complex, 2,2'-bipyridin Butylglycinato Pt(II) nitrate, an anti-tumor component, was studied at different temperatures by fluorescence and far UV circular dichroism (CD) spectroscopic methods. Human serum albumin (HSA) and human tumor cell line K562 were as targets. The Pt(II)-complex has a strong ability to quench the intrinsic fluorescence of HSA. Binding and thermodynamic parameters of the interaction were calculated by fluorescence quenching method. Far-UV-CD results showed that Pt(II)-complex induced increasing in content of $\alpha$ helical structure of the protein and stabilized it. The 50% cytotoxic concentration ($Cc_{50}$) of complex was determined using MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay at different incubation times. Also, fluorescence staining with DAPI (4,6-diamidino-2-phenylindole) revealed some typical nuclear changes, which are characteristic of apoptosis. Above results suggest that Pt (II) complex is a promising anti-proliferative agent and should execute its biological effects by inducing apoptosis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.228-230
• /
• 2002

Recently, electric power reliability of our country has been improved. However, there are still remaining problems which are short-duration variations like instantaneous and momentary interruption and voltage sag by nature calamity ; typhoon, lightning, snow, etc. Besides, power quality ; harmonics, caused by using power electronics equipments, become a hot issue Malfunction of controller and stop machinery, and losing the important data are caused by poor power quality at a couple of second. Due to those, UPS, which is made up battery, has being used, but there are several disadvantages ; long charge and discharge time, environmental problem by acid and heavy metal, and short life time. As generally know, micro-SMES is a method to settle those mentioned. However, there need huge system apparatuses in order to verify the effect of system efficiency and stability considering the size of micro-SMES, the sort of converter type, and various conditions ; inner temperature, magnetic field, quench characteristic of micro-SMES, and etc. In this paper, in order to bring the mentioned above to a settlement, a micro-SMES is modeled with characteristics of micro-SMES is interfaced to EMTOC program using Fortran program interface method. We obtained hopeful answers and made the simulation model of micro SMES.

• 한국식품영양학회지
• /
• 제10권1호
• /
• pp.6-13
• /
• 1997

여러 종류의 coumarin 유도체가 광화학 반응에 의하여 OH·라디칼을 생성하는 반응을 ESR 및 레이저 섬광분해 반응으로 진행시키고 반응속도 상수를 구하여 반응성가 메카니즘을 알아보았다. 본 연구에서 사용된 9종류의 coumarin 유도체는 모두 OH·라디칼 생성반응 메카니즘으로 반응이 진행되었으나 1-ethy1-3-nitro-1-nitrosoguanidine은 광조사에 의해 OH·라디칼 생성반응이 일어나기 전에 분해하여 카르벤 중간체로 변하였다. 9개의 coumarin 유도체는 DMPO-OH 스핀부가 생성물에 해당하는 시그날을 나타내었다. OH·라디칼을 소진시키는 NaN3, EtOH, HCOONa 등은 강한 광증감제로 작용하였다. 수화된 전자의 소멸 THRE 상수는 N20을 첨가했을 때가 K3Fe(CN)6을 첨가했을 때보다 크게 나타났다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.8-11
• /
• 2017

Binary Ti-Al alloys containing 50 to 60 atomic percent aluminum are rapidly solidified by hammer anvil method under an argon atmosphere. Constituent phases in each alloy are identified by X-ray diffractometry and microstructures of the alloys are investigated using a transmission electron microscope. In alloys with aluminum content between 50 and 54 percent, a second phase exists besides TiAl(${\gamma}$); this second phase is identified as $Ti_3Al$(${\alpha}2$). The ${\alpha}2$ phase is observed in two types of morphology. One is as fine lamellar alternating with ${\gamma}$ and the other is as a particle. It is concluded that the existence of a metastable phase with the morphologies stated above should arise from a higher quenching rate attained by the hammer anvil method as compared to the conventional roll or splat-quench method. Implications of the above observation are discussed with respect to the phase relations in the Ti-Al binary system; these implications are still controversial in many respects.