• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.1957-1964
• /
• 2010

In Video coding, the first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP for the first frame of GOP affects the first frame as well as the following frames. Traditionally, the initial QP of a GOP is determined by the initial QP of the previous GOP and the average QP of the inter mode frames. In case of JM, the initial QP of a GOP is adjusted as the initial QP being less than the average QP of inter mode frames by two. However, this method is not suitable for the low bit rate video coding. In this paper, the linear relationship between the optimal QP and the ratio of the PSNR of the first frame and the average PSNR of the inter mode frames is first investigated and the linear model is proposed based on the results of the investigation. The proposed model calculate the optimal initial QP using the encoding results of the previous GOP. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JM algorithm.

• Journal of Broadcast Engineering
• /
• v.21 no.3
• /
• pp.349-356
• /
• 2016

In this paper, we propose an efficient assignment method that assigns quantization parameter (QP) in accordance with group of picture (GOP) structure given in HEVC encoder. Each video frames can have difference QP values based on given GOP configuration for HEVC encoding. Particularly, for important frames we can assign low QP values, and vice versa. However, there has not been thorough investigation on efficient QP assignment method by far. Even in HEVC reference software encoder, only monotonic QP assignment method is employed. Thus, the proposed method assign adaptive QP values to each GOP so that temporal dynamic activity between GOPs can be exploited. Through the experiment, the proposed method showed a 7.3% gain of compression performance in terms of BD-rate compared to HEVC test model (HM) in low-delay configuration, and outperformed the existing QP assignment study on average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1947-1954
• /
• 2012

The first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the initial QP for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. In the case of low bit rate video coding, the initial QP value is fixed to 40 regardless of the output bandwidth. Although this initialization scheme is simple, yet it is not accurate enough. An accurate initial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In the proposed scheme, we determine the initial QP according to the ratio of the first frame to the total bits allocated to a GOP. To estimate the QP of the allocated bits, Rate-QP model is used. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JVT algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.9
• /
• pp.1009-1018
• /
• 2015

In video coding, the first frame of a GOP is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP for the first frame encoding affects the first frame as well as the following frames. To determine the initial QP that maximizes the PSNR of a GOP, several algorithms which uses the ratio of the PSNR of the I frame and the PSNR of P frames of a GOP have been proposed. In this paper, we propose a new traffic model that can be used to determine the optimal initial QP simply and exactly in algorithms that use the PSNR ratio. We first analyze the characteristics of the PSNR ratio of I and P frames and the PSNR of a GOP, and then propose a new traffic model which can represent the characteristics and determine the optimal intial QP. It is shown by experimental results that the initial QP determination method with the proposed model can predict an optimal initial QP whose difference from the optimal value is less than 2. The proposed scheme can also generate the PSNR performance better than that of the existing JVT algorithm.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.235-242
• /
• 2008

To improve video quality and coding efficiency, H.264/AVC adopted an adaptive rate control. But this method has a problem as it cannot predict an accurate quantization parameter(QP) for the first frame. The first QP is decided among four constant values by using encoder input parameters. It does not consider encoding bits, results in significant fluctuation of the image quality and decreases the average quality of the whole coded sequence. In this paper, we propose a new algorithm for the first frame QP decision in the H.264/AVC encoder. The QP is decided by the existing algorithm and the first frame is encoded. According to the encoded bits, the new initial QP is decided. We can predict optimal value because there is a linear relationship between encoded bits and the new initial QP. Next, we re-encode the first frame using the new initial QP. Experimental results show that the proposed algorithm not only achieves better quality than the state of the art algorithm, but also adopts a rate control forthe sequence that was impossible with the existing algorithm. By reducing fluctuation, subjective quality also improved.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1377-1383
• /
• 2012

The first frame of a GOP is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. Although this initialization scheme is simple, yet it is not accurate enough. An accurate intial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In this paper, we propose a traffic model for finding the optimal initial QP which maximizes the PSNR of the GOP. We also propose a method to find model parameters for real-time video encoding. It is shown by experimental results that the proposed traffic model captures initial QP characteristics effectively and the proposed method for model parameters accurately estimates the real values.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2071-2078
• /
• 2009

The first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP (Quantization Parameter) for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. In the case of low bit rate video coding, the initial QP value is fixed to 35 regardless of the output bandwidth. Although this initialization scheme is simple, yet it is not accurate enough. An accurate intial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In the proposed scheme, we use a linear model because there is a linear inverse proportional relationship between the output bandwidth and the optimal intial QP. Model parameters of the model are determined depending on the spatial complexity of the first frame. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JM algorithm.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.2
• /
• pp.112-122
• /
• 1993

Backgrounds : The goal of drug therapy in pneumoconiosis is to inhibit the progression of pulmonary fibrosis related to a toxic effect of the inhaled substance. Although there have been many studies on the therapy of pneumoconiosis, it is still elusive. Quinolyl piperazine phosphate (QP), a derivative of chloroquine, is less toxic, more effective, and longer action than chloroquine. This investigation was performed to examine the effect of the quinolyl piperazine phosphate in silicotic rats. Methods : The silica group was administered intratracheally by 40 mg free silica dust with 0.5 ml normal saline, and the QP group was orally administered QP 10 mg per week after free silica instillation. The animals in the silica group and the QP group were killed at the 1st, 3rd, 8th and 20th week after free silica instillation. We observed the total cell count in bronchoalveolar lavage fluid, luminol-dependent chemiluminescence by viable alveolar inflammatory cells, the dry weights and the amount of hydroxyproline in the left lung and the histopathologic examination in the right lung. Results : 1) The total number of cells of bronchoalveolar lavage fluid in the QP group tended to be decreased in comparison with the silical group. But, It was not significant. 2) Luminol-induced chemiluminescence by viable alveolar inflammatory cells in the QP group was similiar to that in the silical group. 3) The dry weights in the left lung at the 3th and 8th week in the QP group were significantly decreased compared to the silical group. 4) The total amount of hydroxyproline at the 3rd week of the QP group were significantly decreased compared to the silical group. In the silica group, the total amount of hydroxyproline was significantly increased at the 3rd week compared with the 1st group. But, in the QP group, it was significantly increased at the 8th week. 5) In tissue pathology, the infiltration of inflammatory cells around bronchiole, and the number and the size of silicotic nodule in the QP group were similar to the silica group. But, the extent of fibrosis is less than the silica group. Especially we observed progressive massive fibrosis which located in the periphery in 3 cases among the silica group, but couldn't observe in the QP group. Conclusions : QP doesn't significantly suppress the pulmonary fibrosis consequent to the intratracheal instillation of free silica dust, but delay the progression of fibrosis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.59-70
• /
• 1992

Quadratic programming problems(QP) have been widely used as a direction-finding subproblem in the engineering and structural design optimization. To develop an efficient solution algorithm for the QP subproblems, theoretical aspects and numerical behavior of mathematical programming methods that can be used as QP solver are studied and compared. For the solution of both primal and dual QP, Simplex, gradient projection(GRP), and augmented Lagrange multiplier algorithms are investigated and coded. From the numerical study, it is found that the primal GRP algorithm with potential constraint strategy and the dual Simplex algorithm are more attractive and effective than the others. They have theoretical robustness as well. Moreover, primal GRP algorithm is preferable in case the number of constraints is larger than the number of design variables. Favorable features of GRP and Simplex algorithm are merged into a combined algorithm, which is useful in the structural design optimization.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.4
• /
• pp.200-204
• /
• 2006

Purpose: Determination of pulmonary to systemic blood flow ratio (QP/QS) is important for the management of patients with left-to-right shunt. This study was performed to assess the agreement of Qp/Qs ratio using the radionuclide method and oxymetry, to investigate the factors influencing the agreement, and to know how interchangeable the results of each technique. Materials and Methods: We compared the Qp/Qs measured by single-pass radionuclide angiocardiography and oxymetry during catheterization in 207 patients who underwent both studies. In radionuclide method, Qp/Qs was calculated from the pulmonary time-activity curves using a gamma variate fit. The correlation and Bland-Altman analysis were performed according to the levels of shunt and associated lesions. Results: The mean Qp/Qs was $1.83{\pm}0.50$ by radionuclide, and $1.74{\pm}0.51$ by oxymetry. The overall correlation coefficient was 0.86(p<0.001), and Bland-Altman range of agreement encompassing 4SD was 1.05. For atrial septal defect, ventricular septal defect, patent ductus arteriosus, tricuspid and mitral insufficiency, the correlation coefficient was 0.78, 0.90, 0.84, 0.63 and 0.44, and Bland-Altman range was 1.51, 0.74, 0.96, 1.57, and 1.50, respectively. Conclusion: There is good agreement but wide variance between the Qp/Qs ratios by radionuclide method and oxymetry. Associated atrioventricular valvar insufficiency decreases the correlation coefficient and widens the variance. Wide overall variance suggests that Qp/Qs measurements by two techniques should not be used interchangeably.