• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.530-533
• /
• 2003

본 논문에서는 2GHz의 패치폭과 그라운드면의 폭이 같은 QMSA의 구조를 설계 및 제작하였고, QMSA의 구조를 변형하여 용량을 장하한 QMSA와 기생소자를 갖는 QMSA를 제안하였다. QMSA의 구조는 한 쪽 끝이 전기적으로 단락된 λ/4의 구조로 설계하였으며, 용량을 갖는 QMSA는 상측 평행 평판과 하측 평행 평판 사이의 용량을 구성시킴으로써 리턴로스와 공진주파수의 변화를 비교 평가하였다. 또한, 기생소자를 갖는 QMSA의 구조는 상측 평행 평판위에 기생소자를 가변함으로써 안테나를 소형화할 수 있었다. QMSA는 2GHz의 중심주파수를 갖고 2%의 대역폭을 갖으며, 용량의 변화와 기생소자의 길이에 따라 공진주파수의 변화를 보였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.33-41
• /
• 2000

In this paper, a symmetric QMSA(Quarter-wavelength Microstrip Antenna) loading a capacitor to spread the electric flux lines is proposed. It was found that the bandwidth of this symmetric QMSA is broader than that of the asymmetric QMSA having a right-side Parallel plate only to load a capacitor. It was also found that this antenna could receive both vertically and horizontally polarized waves at 2.13GHz, and would be useful as a small antenna for wireless telephones and for indoor communication. A transmission line circuit model of this antenna was obtained and used to compute the resonant frequency and the return loss of the antenna accurately.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.246-249
• /
• 2001

본 논문에서는 기존의 QMSA에 비해 안테나 전체 길이를 소형화함은 물론 전기력선이 미치는 범위가 제한받지 않도록 그라운드 판을 접어올린 좌측 평행 평판과 방사 패치사이 용량을 장하하고 급전점의 위치를 조절하여 더욱 소형화할 수 있는 용량을 장하한 QMSA를 제안하고 설계ㆍ제작했다. 설계ㆍ제작된 용량을 장하한 QMSA는 중심 주파수를 2.0GHz하고 급전점을 변화시켜서 안테나 전체 길이를 40mm에서 37mm로 소형화하였다. 또한, 급전점을 변화시켜서 용량을 장하한 QMSA의 방사 패치 길이가 17mm(equation omitted g/4)의 2배인 35.1(equation omitted g/2)로 제작된 용량을 장하한 변형된 MSA는 공진주파수가 2.16GHz로 용량을 장하한 QMSA에 비해 소형화할 수는 없으나 대역폭이 9.20 %로 매우 넓음을 보였다. 그리고 상용화된 HFSS에 의해서 QMSA, 용량을 장하한 QMSA, 변형된 MSA, 용량을 장하한 변형된 MSA등의 방사 특성과 리턴로스 특성 분석은 용량을 장하하는 안테나가 이득은 낮지만 공진 주파수가 낮아서 소형화할 수 있음을 보였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.219-222
• /
• 2002

본 논문에서는 기존의 QMSA에 비해 안테나 전체 길이를 소형화함은 물론 전기력선이 미치는 범위가 제한받지 않도록 그라운드 판을 접어 올려 방사 패치와 단락시키고 급전점의 위치를 조절하여 더욱 소형화할 수 있는 QMSA를 제안하고 설계 제작했다. 그리고 안테나에 잡음지수가 낮아지도록 LNA를 연결하여 본래의 QMSA에 비해 이득이 높고, 잡음에 강한 능동안테나를 설계·제작하였다. QMSA와 LNA는 1.8 ㎓대로 설계하여 각각의 이득과 안정도를 확인하고, 안테나와 증폭기가 통일한 평면상에 구성된 능동안테나와 QMSA를 비교 평가하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.11-16
• /
• 1999

In this paper, we designed and fabricated QMSA(Quarter-Wavelength Microstrip Antenna) for 850MHz band on the CGP-500 PTFE substrate(by CHUKOH company) with ε/sub r/=2.6, H=1.6mm(±0.08), where width of the radiation patch is .identical with that of the ground plane. A well matched feed point was obtained by experiments and this QMSA was fed by using prove feed method. The resonant frequencies and the return losses were mcasured by cutting the gap L₃ between the radiation patch and the ground plane, with a 5mm cutting length, step by step. As a result, we found that the measured return losses were decreased and the resonant frequencies were increased when the gap L₃ was shorter, especially under 10mm, unlike we had expected.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.599-602
• /
• 2006

본 논문에서는 변형된 QMSA에 전기력선이 제한되지 않도록 용량을 장하한 MSA를 제안 하였다. 안테나의 크기는 약 $30mm\times86.6mm\times1.575mm$의 크기를 갖는다. 안테나 특성은 듀얼밴드 설계에서 1.93GHz와 2.03GHz의 두 동작 주파수 동조를 수월하게 하였다. 듀얼밴드 동작을 얻기 위한 기술은 양측 평행 평판과 $\lambda/2$ 방사 폐치를 변화시킴으로서 조정할 수 있다. 또한 1.93GHz 와 2.03GHz의 동작 주파수에 대해 E면과 H면에서 시뮬레이션 된 방사 패턴은 비교 분석되었다. 이동 통신을 위한 설계 제작된 듀얼 밴드 안테나 이득은 약 11.394dBi 이고 이득 변화는 아래와 위 공진 주파수에 대해 1.0dBi 보다 작다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.32-43
• /
• 1999

In this paper, the transformed QMSA to load a capacitor without limitation of the electric force on QMSA(Quarter-wavelength Microstrip Antenna) is designed. Bandwidth of the designed and manufactured antenna is 5.7% at the resonant frequency of 2.0 GHz and the resonant frequency and bandwidth versus change of any arbitrary feed point is observed. Since the size of wide slot width between the left and right parallel plate to load a capacitor is very wide bandwidth, will be suitable for very wide bandwidth communication. The radiation pattern characteristics of the designed antenna based on the dipole structure and the aperture structure analysis method. As calculation results, relative backward radation is - 5 dB.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.845-848
• /
• 1999

We designed and fabricated partially shorted QMSAs(Quarter-Wavelength Microstrip Antennas) for 850［MHz］band on various Copper-clad Laminates substrates (TACONIC company), where the width of the radiation patch is identical with that of the ground plane and the radiation patch is partially shorted to the ground plane. The resonant frequencies and the return losses according to the electrical thickness were measured by reducing the PSW (Partially Shorted Width) to 0［mm］. As a result, a good characterized antenna with an average 11% reduced resonant length and a return loss -15.86~-30.68［㏈］ was obtained when the total PSW was in the range of 70% of radiated patch width, compared to the conventional QMSA.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.861-864
• /
• 1999

We designed and fabricated microstrip line fed QMSAs(Quarter-Wavelength Microstrip Antenna) for 850〔MHz〕 band on the CGP-500 Copper-clad Laminates substrate (CHUKOH company) with $\varepsilon$$_{r}$＝2.6, H＝1.6〔mm〕( $\pm$0.08), where the width of the radiation patch is identical with that of the ground plane. The resonant frequencies and the return losses were measured by reducing the PSW(Partially Shorted Width) to 0〔mm〕, step by step, when the microstrip line width was 1.47〔mm〕, 2.93〔mm〕and 4.4〔mm〕separately. As a result, a good characterized antenna with a 11% reduced resonant length and a return loss -29.44〔㏈〕 was obtained when the total PSW was in the range of 70% of radiated patch width, compared to the conventional QMSA.A.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.235-238
• /
• 2013

In this paper, ㄷ-type MSA for the QMSA structure is proposed. Transformed ㄷ-type MSA is stacked three dielectrics. ㄷ-type MSA structure was load upper & lower surface of the dielectric radiating patch and the ground turn-up left right capacity between parallel plates and radiating patch. Between the dielectric permittivity of the dielectric insert by 2.55 by varing the frequency was shifted. Designed ㄷ-type MSA sturcture of L1 was varied up to 1mm~22mm and frequency was shifted from 3.65GHz~3.84GHz. Also Designed ㄷ-type MSA was measured 1.95dBi maximum gain and bandwidth of 1.61 to 3.64%.