• 한국건설관리학회논문집
• /
• 제14권5호
• /
• pp.131-143
• /
• 2013

BIM 지침을 통해 기본적인 모델링 기준을 제공하고 있지만, BIM 모델링 업무를 수행하는 참여자 별로 기준이 상이하고 BIM 모델의 활용목적에 따른 적용기준이 다르기 때문에 BIM 적용 지침에 대한 이행여부의 평가는 BIM 모델의 활용목적에 따른 품질을 만족시키기 위한 중요한 절차이다. 하지만 지침에 따라 작성된 BIM 모델의 검토항목 및 방법이 제시되지 않고 있다. 본 연구는 BIM 모델의 완성도를 높이기 위해 국내 BIM 지침의 BIM 기반 품질검토 항목을 도출하고 자동 품질검토 수행을 위한 룰 정의서를 제시한다. 먼저 국내 BIM 지침을 분석하여 품질검토 항목을 도출하고 플로우차트 및 의사코드를 활용한 구조화를 통해 룰 정의서를 작성한다. 작성된 룰 정의서를 기반으로 사례적용을 실시하여 자동 품질검토 과정을 수행한다. 본 연구는 3차원의 방대한 데이터를 포함한 BIM 모델의 설계품질과 완성도를 높이는데 기여할 것이다. 향후 활용목적에 따른 BIM 지침의 개발이 필수적으로 이루어져야 하며 BIM모델의 품질검토를 위한 구체적인 절차나 기준이 제공되어야 할 것이다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권5호
• /
• pp.163-170
• /
• 2006

최근 피조콘시험은 과거 일반적으로 사용되었던 표준관입시험과 함께 연약지반의 특성을 평가하기 위해 빈번히 사용되고 있다. 본 연구에서는 하부지반의 지층상태를 파악하고 설계를 위한 연약지반 심도 결정 및 시공시 수직배수재 타설심도 결정시 그 신뢰도를 향상시키기 위해서 표준관입시험결과, 선행압밀하중, 수직배수재 타설시 관입에너지와 피조콘시험을 통한 콘 관입저항치와의 관계를 분석하였다. 대상 지역별로 일정한 표준관입저항치를 기준으로 평균 연약지반심도를 결정하여, 동일한 심도에서 피조콘관입저항치를 값을 분석한 결과 qc=(1.09~1.63)N, 선행압밀하중을 고려한 결과 qc=(1.21~1.98)N의 관계를 나타내었다. 또한 수직배수재 타설시 관입에너지와 피조콘시험을 통한 콘 관입저항치(qc)와의 관계를 분석한 결과 평균적으로 피조콘 관입저항치 $10kgf/cm^2$의 경우 수직배수재 타설 시 관입저항치는 약 $65{\sim}70kgf/cm^2$ 의 값을 나타내었다.

• 한국대기환경학회지
• /
• 제18권6호
• /
• pp.527-538
• /
• 2002

In this study, the performance of sampling and of analytical methodology was examined against a number of selected volatile organic compounds (VOCs) in the ambient air. The canister-based sampling method for VOCs has been a viable and widely used approach that is based on research and evaluation performed over the past several years. VOCs were determined using canisters by GCMSD analysis. A total of target analyses in this study included approximately 30 VOCs designated in TO-l4A categories including BTEX. The methodology for QC(quality control) was intensively investigated with a wide range of performance criteria such as; (1) cleanliness of canisters, (2) reproducibility of diluter, (3) instrumental detection limits of preconcentrator and GCMSD, and (4) precision and accuracy of GCMSD. For most of the compounds tested, precision was less than $\pm$5%, IDL was 0.2 ppbv, accuracy was $\pm$5%, respectively. This study demonstrated that the combination of canister sampling and GC/MSD analysis could be reliably applied to the measurements of BTEX in ppbv levels that are typically observed in/outdoor air environment.

• 한국대기환경학회지
• /
• 제15권1호
• /
• pp.63-69
• /
• 1999

To offer a general guideline for the quantitative analysis of airborne pollutants, we designed and conducted a comprehensive QA/QC test using two different strategic approaches, namely (1) field-based comparative measurement and (2) laboratory-based comparative analysis. The former task was performed to make meaningful comparison of combined errors occurring from both sampling and analytical techniques in the measurements of such components as: (1) criteria pollutants, (2) volatile organic compounds (VOCs), and (3) particulate matters with the associated metals and ions. The latter task was also conducted to compare various types of bias arising mainly from the laboratory analytical procedures of (1) gaseous standards of VOCs and (2) of aqueous standards of metals and ions. The concentration data derived from each of these two different types of major tasks were evaluated per chemical species categorized as above. While the very details of these studies are to be reported on an individual basis according to the above classification of the project, this paper is presented to provide an overview of the whole project - its aim and direction.

• 한국환경보건학회지
• /
• 제37권1호
• /
• pp.57-63
• /
• 2011

Crocidolite quality control (QC) sampling created by the wet generation method has been validated by validation tests such as the accuracy, precision, and storage tests. For this study we designed and developed a manufacturing apparatus and standard operating procedure for making these QC samples. The most important step in the procedure of making QC samples was the stage eliminating static electricity in asbestos fibers. This static electricity hampers the fibers clog functioning. In accuracy and precision tests by phase contrast microscopy analysis, the difference between the reference values and the studied values was at maximum 17.8%. This satisfies the AIHA proficiency analytical test criteria for asbestos. We could confirm the nearly even distribution of crocidolite fibers on the membrane filter. Also, there was no loss of fibers in the storage test after the one month.

• 한국건설관리학회논문집
• /
• 제24권1호
• /
• pp.40-50
• /
• 2023

건설 품질관리는 건설 프로젝트의 성공적 수행을 위한 필수요소이다. 최근 ICT 기술 적용이 활성화 됨에 따라 현장 검측 업무에 첨단 기술 및 장비를 활용하기 위한 다양한 시도가 이루어지고 있다. 그러나 개별적 검측업무에 대한 첨단기술 적용에 앞서 전체 검측업무를 선제적으로 계획하는 것이 매우 중요하다. 본 연구의 목적은 건설 검측업무에 첨단 기술 및 장비를 활용하기에 앞서 검측대상과 관련 정보를 명확히 도출하기 위한 데이터베이스와 그 데이터 베이스를 활용하기 위한 알고리즘을 개발하는 것이다. 또한 건축 시공계획에 따라 검측업무에 해당하는 액티비티를 자동 생성하기 위한 프레임워크를 제안하였다. 그 방법으로 국토교통부에서 고시한 책임 상주 감리 체크리스트의 검사 항목을 바탕으로 검측 대상, 검측 시기, 검측 방법, 검측 범위, 검측 제약요소를 분석하고 분류하였다. 본 프레임워크는 철근 콘크리트 공사 사례에 적용되었다. 개발된 건설 검측 업무 액티비티 자동 생성 프레임워크는 건축 시공을 위해 사용하는 공정관리 프로그램, 검측업무 및 검측기술을 연계하는데 적용할 수 있다. 향후 다양한 건설 프로젝트의 검측 업무 시, 액티비티 자동 생성 및 자동화를 위한 기초로 활용될 것으로 판단된다.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.288-296
• /
• 2009

We conducted validation for asbestos quality control (QC) samples made by the developed method which was presented in our published paper. The main results of the validation study are as follows. The pooled coefficient variations of analytical results in three different concentrations (low, medium, and high concentration) for amosite and chrysotile were less than 20 %, which met the sample homogenicity criteria of NIOSH. Also we confirmed the homogenicity of asbestos samples by using the relocatable field slide. To evaluate the field applicability of the developed asbestos QC samples, the field validation was performed with four proficient asbestos analysts by using the statistical methods of AIHA asbestos PAT program. All analytical results from four asbestos analysts were located in the acceptable range.

• 약학회지
• /
• 제51권3호
• /
• pp.174-178
• /
• 2007

A reverse-phase high performance liquid chromatography method with electrospray ionization and detection by mass spectrometry is described for the simultaneous determination of doxifluridine and its active metabolite 5-flu-orouracil (5-FU) in monkey serum. The method has greater sensitivity and simpler process than previous published methods with good accuracy and precision. A proper liquid/liquid extraction was used to extract simultaneously doxifluridine and 5-FU which has considerable difference in the polarity. Extracts were analyzed using LC/MS/MS providing a short analysis time within 5 min. The lower limit of quantification was validated at 10.0 ng/ml of serum for both doxifluridine and 5-FU. Accuracy and precision of quality control (QC) samples for both analytes met FDA Guidance criteria of ±15% for average QC accuracy with coefficients of variation less than 15%. The method will be applicable for preclinical studies and bioequivalence studies.

• 대한안전경영과학회지
• /
• 제26권2호
• /
• pp.107-115
• /
• 2024

This study conducted frequency analysis, reliability analysis, descriptive statistics, and correlation analysis to determine the impact of quality control managers' perception and implementation of KS certification factory inspection evaluation items on follow-up management. Through a multiple linear regression model, the influence of KS certification officer's awareness and implementation of KS certification factory inspection on post management was found to have a positive (+) influence on post management, with implementation having a greater influence on post management than awareness. It was having an impact. The independent variable (perception) has a statistically significant impact on the mediating variable (execution), and in the stage of verifying the mediating effect, the influence of the independent variable (perception) on the dependent variable (follow-up management) has a statistically significant impact. , In the stage where the independent variable (perception) and the mediator (implementation) are input simultaneously, both the independent variable and the mediator have a statistically significant effect on the dependent variable, indicating that there is a mediation effect.

• 한국대기환경학회지
• /
• 제31권2호
• /
• pp.157-163
• /
• 2015

To establish National Reference Method (NRM) for $PM_{2.5}$, operational performance of 5 different commercial gravimetric-based $PM_{2.5}$ measuring instruments was assessed at Bulkwang monitoring station from January 23, 2014 to February 28, 2014. First, physical properties, design, and functional performance of the instruments were assessed. Evaluation was carried out to determine whether operating method for the instruments and levels of QA/QC activities meet the data quality objectives (DQOs). To verify whether DQOs were satisfied, reproducibility of QA/QC procedures, accuracy, relative sensitivity, limit of detection, margin of error, and coefficient of determination of the instruments were also evaluated. Results of flow rate measurement of 15 candidate instruments indicated that all the instruments met performance criteria with accuracy deviation of 4.0% and reproducibility of 0.6%. Comparison of final $PM_{2.5}$ mass concentrations showed that the coefficient of determination ($R^2$) values were greater than or equal to 0.9995, and concentration gradient ranged from 0.97 to 1.03. All the instruments satisfied criteria for NRM with the estimated precision of 1.47~2.60%, accuracy of -1.90~3.00%, and absolute accuracy of 1.02~3.12%. This study found that one particular type of measuring instrument was proved to be excellent, with overall evaluation criteria satisfied.