• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.11
• /
• pp.1390-1398
• /
• 1999

A numerical analysis for ROT sparger of PWR(Pressurized Water Reactor) is carried out. Computation is performed to investigate the flow characteristics as the change of design factor. As the result of this study, RDT sparger's flow resistance coefficient is K=3.53 at the present design condition if engineering mar&in is considered with 20%, and flow ratio into branch pipe is $Q_s/Q_i=0.41$. Velocity distribution at exit is not uniform because of separation in branch pipe. In the change of inlet flow rate and section area ratio of branch pipe for main pipe, flow resistance coefficient is increased as $Q_s/Q_i$ decreasing, but in the change of branch angle and outlet nozzle diameter of main pipe, flow resistance coefficient is decreased as $Q_s/Q_i$ decreasing. As the change rate of $Q_s/Q_i$ is the larger, the change rate of flow resistance coefficient is the larger. The change rate of pressure loss is the largest change as section area ratio changing. The optimal design condition of sparger is estimated as the outlet nozzle diameter ratio of main pipe is $D_s/D_i=0.333$, the section area ratio is $A_s/A_i=0.2$ and the branch angle is ${\alpha}=55^{\circ}$.

• The Korean Journal of Ecology
• /
• v.22 no.6
• /
• pp.355-361
• /
• 1999

Distribution of size class, population regeneration and changes in the population structure of Quercus mongolica were studied from 1994 to 1999 in Mt. Jumbong (128°27' E, 38° 04' N) of Mt. Sorak National Park and Biosphere Reserve in central Korea. Three 20m × 20m permanent quadrats were set up at the elevation of 900m. The vegetation of the study site was dominated by Quercus mongolica and Acer pseudosieboldianum, but little change was observed in the community structure from 1995 to 1999. Most mortality in the study site was observed in small trees of A. pseudosieboldianum and Tilia amurensis. Mean annual growth in dbh (diameter of breast height) of Q. mongolica for 4 years was only 0.09cm, and no ingrowth of saplings (dbh < 2.5cm) into tree class was observed during the study period. Among the 21 Q. mongolica trees studied in the permanent quadrats. all the smaller trees (dbh < 30cm) were established in 1920 ∼ 1950, while many bigger trees (with 40cm < dbh < 80cm) were established in 1750 ∼ 1800, indicating that its establishment was episodic. Distribution of dbh classes among Q. mongolica trees shows that smaller trees were poorly represented, and no saplings of Q. mongolica occurred in the permanent quadrats studied, indicating that currently Q. mongolica is not regenerating well in the study site. Total seed production of Q. mongolica in 1994 was estimated as 88 acorns per square meter in the study site. Rate of predation including caching of acorns was highest in 1994, then declined sharply thereafter. Most of the acorns which managed to survive in the first year were predated in the second year, and only 5% of the acorns produced in 1994 survived into the third year. No seeds produced in 1994 or seedlings germinated from them succeeded to survive to 5 years after seed production. However, seedling emergence rate and seedling survival were high in the early growing season in 1995. These results suggest that predation can be a significant factor in the regeneration of Q. mongolica. and that Q. mongolica is not regenerating well in Mt. Jumbong and needs large scale disturbances for its new recruitment.

• Survey Research
• /
• v.9 no.2
• /
• pp.85-118
• /
• 2008

There have been a great many ups and downs in Korean Credit Card Industries after 2000. It is certain that each Credit Card Company copes with the situations by means of its organizational capabilities. According to the evolutionary view of Institutionalism, a company's capabilities are composed of every day routines, codes, rules, learning(by doing, using, interacting) and decision makings. The purpose of this article is to verify how two Korean Credit Card Companies showed their strategic differences and what factors exposed each company's own limits. To examine the company's ordinary conducts, this study used Q methodology with a random sample of 16 members from each company. Especially from the results of Q factor analysis, it becomes clear that each company still takes a serious view of the economy of scale rather than the innovation or improvement of organizational and relational dynamics.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.14-21
• /
• 2021

Inner shell material of LNG storage tanks that store ultra-low temperature LNG at -162℃ requires structural integrity assessment of a crack-like defect. From the viewpoint of conventional fracture mechanics, the assessment has mainly performed by single parameter using stress intensity factor K, J-integral and CTOD. However, the stresses in a material of crack tip are not unique caused by constraint loss due to size and geometry of the structure. Various attempts have been made to complement a single parameter fracture mechanics, typically with Q-stress. In this paper, we have performed a two-parameter approach by deriving the Q-stress coupling with J-integral suitable for the evaluation of the crack tip stress field in the non-linear elastic region. A quantitative evaluation of the constraint effect has performed by using the J-Q approach. It was evaluated that the SENB type specimen had a crack ratio of 0.1 to 0.7 and the wide type specimen had a crack ratio of 0.2 to 0.6.

• 한국노년학
• /
• v.39 no.3
• /
• pp.613-633
• /
• 2019

The purpose of this research is to analyze the subjective perception pattern of Good Death of the Elderly by using Q-methodology. The researcher conducted individual in-depth interviews of 9 people, 4 times FGI and literature reviews to collect self-reflective statements about good death and dying. The interviewees were death-related workers, people who had experience with death of their spouse or parents, experts and the elderly through individual or group interviews. Thirty-four Q-samples were extracted from the Q-population and P-samples of thirty people male and female 15 each from sixties to eighties participated in Q-sorting. Data analysed using by QUANL program and found that three factor structures were appropriate accounted for 54.64% of the total variance. Perception pattern on Good Death was analysed into 3 types; Death without fear(type 1), Burdenless death(type 2), Long-lived-death(type 3). According to these results, the researcher discussed theoretically and suggested some significant implications.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.62-66
• /
• 2016

This paper presents a MedRadio-band low power low noise amplifier for Medical Devices. A proposed MedRadio-band low power low noise amplifier adopts a current-reuse resistive feedback topology to increase overall gm and reduce power consumption. The gain of the LNA increases by the Q-factor of the additional series RLC input matching network, and its noise figure is minimized by the similar factor. Furthermore, it consumes low power because of low supply voltage and current reuse technique. By exploiting the $g_m$-booting and matching network property, the proposed MedRadio-band low noise amplifier achieves a noise figure of 0.85 dB, a voltage gain of 30 dB, and IIP3 of -7.9 dBm while consuming 0.18 mA from a 1 V supply voltage in $0.13{\mu}m$ CMOS technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.454-459
• /
• 2007

In this work, micro-scale, high-performance solenoid-type RF chip inductors utilizing amorphous $Al_2O_3$ core material were investigated. The size of the chip inductors was $0.86{\times}0.46{\times}0.45mm^3$ and copper(Cu) wire with $27{\mu}m$ diameter was used as the coil. High frequency characteristics of the inductance(L), quality factor(Q), impedance(Z), and equivalent circuit parameters of the RE chip inductors were measured and analyzed using an RF impedance/material analyzer(HP4291B with HP16193A test fixture). It was observed that the RF chip inductors with the number of turns of 9 to 12 have the inductance of 21 to 34nH and exhibit the self-resonant frequency(SRF) of 5.7 to 3.7GHz. The SRF of inductors decreases with increasing the inductance and inductors have the quality factor of 38 to 49 in the frequency range of 900MHz to 1,7GHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.139-142
• /
• 2003

Microwave dielectric properties of $Ca(Li_{1/4}Nb_{3/4})O_3-CaTiO_3$ ceramic systems were investigated with calcination temperatures and amounts of $CaTiO_3$ in the range of 0.2 to 0.4mol. $Ca(Li_{1/4}Nb_{3/4})O_3$ ceramics having orthorhombic crystal structure could be synthesized at $750^{\circ}C$ and sintered well at $1250^{\circ}C$. They showed the dielectric constant of 26, quality factor($Q{\times}f_o$) of 13,000 and temperature coefficient of resonant frequency(${\tau}_f$) of $-49{\pm}2ppm/^{\circ}C$ With adding the $CaTiO_3$ amount the dielectric constant and ${\tau}_f$ increased due to the solute of $CaTiO_3$ but the quality factor decreased. The 0.7$Ca(Li_{1/4}Nb_{3/4})O_3-0.3CaTiO_3$ ceramic showed the dielectric constant of 44, quality factor($Q{\times}f_o$) of 12,000 and ${\tau}_f$ of $-9{\pm}1ppm/^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.524-530
• /
• 2006

$xCa(Li_{1/4}Nb_{3/4})O_{3}-(1-x)CaTiO_{3}$ ceramics were sintered under the presence of zinc-borosilicate(ZBS) glass and resultant microwave dielectric properties were investigated with a view to applying the composition to low-temperature co-fired ceramic(LTCC) technology. The addition of $5{\sim}15wt%$ ZBS glass ensured successful sintering below $900\;^{\circ}C$. In general, increased addition of ZBS glass increased sinterability but it decreased the quality factor($Q{\times}f_{0}$) significantly due to the formation of an excessive liquid and second phases. As for the addition of $CaTiO_3$, the dielectric constant(${\epsilon}_r$) and temperature coefficient of resonant frequency(${\tau}_f$) increased, while the quality factor($Q{\times}f_{0}$) did not show an apparent change. The sintered $0.9Ca(Li_{1/4}Nb_{3/4})O_{3}-0.1CaTiO_{3}$ specimen at $900\;^{\circ}C$ with 10 wt% ZBS glass demonstrated 39.6 in dielectric constant(${\epsilon}_r$), 4,400 in quality factor$(Q{\times}f_{0}),\;and\;-11ppm/^{\circ}C$ in temperature coefficient of resonant frequency(${\tau}_f$).

• Journal of Korean Academy of Nursing
• /
• v.35 no.3
• /
• pp.503-513
• /
• 2005

Purpose: The purpose of this study was to explore the structure and characteristics of nursing college students' personality-based career attitudes. Method: A Q-methodology was used to identify factors in nursing students' personality-based career attitudes. A Q sample was collected from in-depth and objective interviews and literature reviews. A P sample consisted of 27 nursing students. Result: Results revealed three factors: Deliberateness-oriented, Positive-oriented, and Negative-oriented. The 'Deliberateness-oriented' factor was characterized by preference of logical and objective ways in evaluation and trying to seek deep relationships with only a small number of people. The 'Positive-oriented' factor showed creative, autonomous and sociable traits and put value on extensive interpersonal relations. The 'Negative-oriented' factor focused on possibility and enjoyed artistic actions. All 3 factors were negative in NGO or political activities. Conclusion: Based on this result, curriculum development for nursing students should give students a variety of experiences. These findings will be the basic data for finding appropriate positions within the work place for nursing students and help them select appropriate careers for their own personality types.