• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.1
• /
• pp.90-97
• /
• 2018

Purpose The lung segment ratio which is obtained through quantitative analyses of lung perfusion scan images is calculated to evaluate the lung function pre and post surgery. In this Study, the planar image production methods by using Q-Metrix (GE Healthcare, USA) program capable of not only quantitative analysis but also computation of the segment ratio after having performed SPECT/CT are comparatively evaluated. Materials and Methods Lung perfusion scan and SPECT/CT were performed on 50 lung cancer patients prior to surgery who visited our hospital from May 1, 2015 to September 13, 2016 by using Discovery 670(GE Healthcare, USA) equipment. AP(Anterior Posterior)method that uses planar image divided the frontal and rear images into three rectangular portions by means of ROI tool while PO(Posterior Oblique)method computed the segment ratio by dividing the right lobe into three parts and the left lobe into two parts on the oblique image. Segment ratio was computed by setting the ROI and VOI in the CT image by using Q-Metrix program and statistically analysis was performed with SPSS Ver. 23. Results Regarding the correlation concordance rate of Q-Metrix and AP methods, RUL(Right upper lobe), RML(Right middle lobe) and RLL(Right lower lobe) were 0.224, 0.035 and 0.447. LUL(Left upper lobe) and LLL(Left lower lobe) were found to be 0.643 and 0.456, respectively. In the PO method, the right lobe were 0.663, 0.623 and 0.702, respectively, while the left lobe were 0.754 and 0.823. When comparison was made by using the Paired sample T-test, Right lobe were $11.6{\pm}4.5$, $26.9{\pm}6.2$ and $17.8{\pm}4.2$, respectively in the AP method. Left lobe were $28.4{\pm}4.8$ and $15.4{\pm}5.6$. The right lobe of PO had values of $17.4{\pm}5.0$, $10.5{\pm}3.6$ and $27.3{\pm}6.0$, while the left lobe had values of $21.6{\pm}4.8$ and $23.1{\pm}6.6$, thereby having statistically significant difference in comparison to the Q-Metrix method for each of the lobes (P<0.05). However, there was no statistically significant difference in Right middle lobe (P>0.05). Conclusion The AP method showed low concordance rate in correlation with the Q-Metrix method. However, PO method displayed high concordance rate overall. although AP method had significant differences in all lobes, there was no significant difference in Right middle lobe of PO method. Therefore, at the time of production of lung perfusion scan results, utilization of Q-Metrix method of SPECT/CT would be useful in computation of accurate resultant values. Moreover, it is deemed possible to expect obtain more practical sectional computation result values by using PO method at the time of planar image acquisition.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.137-146
• /
• 2004

Laser Induced Breakdown Spectroscopy(LIBS) system is being developed as an in-situ analysis system for the radioactive waste glass in the cold crucible melter. In order to complete the LIBS system, a spectrometer, a detector, and a laser were structured. An ESA 3000 (LLA Instruments GmbH, Germany) including a calibrated Kodak KAF-1001 CCD detector was selected as the spectrometer. A Q-switched Nd-YAG Brilliant(Quantel, France) laser was selected as an energy source. As the first research stage, the excitation temperatures of Fe(I) as a function of the detector's delay intervals(500, 1000, 1500, 2000ns) were evaluated using the Einstein-Boltzmann equation. The optimized excitation temperature of Fe (I) was 7820k at the delay time of 1500㎱ using the 532nm Nd-YAG laser pulse. This LIBS system will be optimized under the real environment vitrification facility in the near future and then used to be in-situ analyzed the glass compositions in the melter qualitatively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.107-118
• /
• 1994

As satellite altimetry is being progressed to apply with heigher precision to maginal seas, it was necessary to improve correction procedures for tidal signals in altimetry with more accurate tidal model than well-known model of Schwiderski for studying marginal sea dynamics. As a first step, tidal regime of semidiurnal tides$(M_2,\;S_2,\;N_2,\;K_2)$ and diurnal tides$(K_1,\;O_1,\;P_1,\;Q_1)$ were computed with a finer details of formulation of tidal model over the East Asian Marginal Seas covering the Okhotsk Sea and South China Sea and part of Northwest Pacific Ocean with mesh resolutions of 1/6$^{\circ}$. Subsequently the computed sets of harmonic constants from the model were used to remove the tide in selected Sea Surface Heights from Geosat in the modelled region. Preliminary correction procedure suggested in the present study may be extensively used for obtaining Sea Surface Topography over the East Asian Marginal Seas, especially for the region where Schwiderski's harmonic constants are not available.

• Journal of the Korean Ceramic Society
• /
• v.38 no.3
• /
• pp.280-286
• /
• 2001

10 이하의 저유전율을 갖는 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스의 미세구조와 고주파 유전특성을 조사하였다. (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스는 정방정(tetragonal) 구조를 가진다. 0.1BaWO$_4$-0.9Mg$_2$SiO$_4$세라믹스는 BaWO$_4$와 $Mg_2$SiO$_4$의 상들이 공존하는 혼합상을 보였으며, $Mg_2$SiO$_4$가 이차사으로 형성된 것이 관찰되었다. 120$0^{\circ}C$~140$0^{\circ}C$에서 2시간 동안 소결된 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x=0.1~0.9) 세라믹스는 $\varepsilon$$_{r}$=6.37~8.21, Q.f=15000~99422 그리고 $ au$$_{f}$=73.9~48.9 ppm/$^{\circ}C$의 고주파 유전특성을 가졌다. $\tau$$_{f}$를 보정하기 위해, CaTiO$_3$(1,5 wt%)가 (1-x)BaWO$_4$-xMg$_2$SiO$_4$(x$\geq$0.9) 세라믹스에 첨가되었다. 135$0^{\circ}C$에서 2시간 동안 소결된 0.1BaWO$_4$-0.9Mg$_2$SiO$_4$+CaTiO$_3$(5 wt%) 세라믹스는 $\varepsilon$$_{r}$=7.3, Q.f=30532 그리고 $\tau$$_{f}$=-30 ppm/$^{\circ}C$의 고주파 유전특성을 얻었다. 얻었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.512-515
• /
• 2010

SIGINT(SIGnal INTelligence) includes several parameters intercepted by measurement and analysis of the RF(Radio frequency) signal from free space. One of the important parameters is frequency information. Expecially, in order to perform instantaneous frequency measurement of Radar and Missile seeker's RF signals, we use dedicated RF modules as a DFD(Digital Frequency Discriminator) to provide frequency information by measurement of the relative phase difference between signals via intended RF delay lines. It must measure and provide realtime based frequency information on short pulsed RF signal up to 100 nSec or less. This document proposes Ultra wideband DFD consisted of a RF input section of Wideband 4 channel RF delay line and correlator, a digital processing section to measure and provide frequency information from I/Q signal, and a frequency calibration section. Also, it will show design suitability based on test results measured under test condition of very short input pulse signals.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.649-649
• /
• 2015

최근 기후변화 및 이상기후로 인해 하천환경 또한 급격하게 변화되고 있다. 변화되는 지구환경에 대응하기 위해 하천환경 대책과 하천생태계 보전/복원, 생물 보호, 친수기능 강화를 요구하고 있는 실정이다. 더욱이 소하천 건천화 및 하천환경관리에 대한 중요성은 대두되고 있으나 비용 및 인력투입 문제로 수위나 유량 등의 기초자료인 수위-유량 계측기술 및 대응연구가 미미한 실정이다. 체계적인 하천관리를 위해서는 신뢰성 있는 대상 하천의 수리량 자료 확보가 기본으로 요구된다. 이러한 중소하천의 관리의 신뢰도를 높이기 위해서는 실시간 수위유량 자료 확보가 필수적이다. 현재 하천 정비 계획 단계에서 수문모델링을 통해 중소하천의 유량을 산정하고 있지만 산발적으로 측정한 자료로는 검/보정에 한계가 있으며, 신뢰도를 확보하기 어려운 실정이다. 이수, 환경, 생태 등의 관점에서는 평상시 유량에 대한 실시간 정보가 매우 중요하다. 이에 체계적인 하천관리를 위해서는 중소하천에 대한 실시간 수리량 자료를 경제적으로 확보 할 수 있는 장치 개발 및 현장적용이 시급하다. 본 연구에서는 하천 횡단구조물이 가지고 있는 유량 측정의 편이성을 최대한 이용하여 급성장하고 있는 영상분석기술과 IT을 하천공학분야에 접목하여 중소하천의 수위와 유량을 실시간으로 원격 측정하는 WIA (Wireless Image Acquisition) 시스템을 개발하였다. WIA 시스템은 라즈베리파이 기반으로 적외선카메라를 이용하여 일정한 시간간격으로 횡단구조물의 상류, 중류, 구조물 주위의 흐름 영상을 확보하여 중앙처리장치로 전송하는 시스템으로 구성된다. WIA 시스템에서 전송된 영상은 본 연구에서 개발한 영상판독 S/W 및 H-Q 산정 S/W를 통해 하천의 수위를 판독하고 실시간으로 하천단면 수위유량 산정 자료 구축하는 자료로 활용된다. 현재 WIA 시스템의 성능 및 개선과 영상판독 S/W 및 H-Q 산정 S/W서버와의 연계운영 성능 평가를 통해 장치를 검증하는 단계에 있으며, 추후 서버구축을 통해 홍수 예 경보와 하천수질관리를 위한 기초자료로 활용될 것으로 기대된다. 또한 본 연구에서 개발하는 유량측정 시스템을 적용하면 기존 장비의 약 15% 예산으로 실시간 수리량 자료를 확보할 수 있을 것으로 예상된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.51-51
• /
• 2021

환경생태유량은 수생태 건강성 유지를 위한 최소한의 유량으로 K-water에서는 유량증분방법론 기반의 1차원 물리적 서식처 모형인 PHABSIM(Physical habitat simulation system)을 이용해 고시지점에 대해 환경생태유량을 산정하여 제시하고 있으나, PHABSIM을 이용하여 환경생태유량을 산정하기 위해서는 지형, 수문 및 어류조사와 같은 현장조사를 지속적으로 실시해야한다는 한계점이 존재한다. 따라서 본 연구에서는 안동댐 하류유역(4,565.7 km²)을 대상으로 SWAT(Soil and water assessment tool)과 PHABSIM을 연계하여 수문모형을 이용한 유량 모의에 따른 대상 어종의 환경생태유량을 산정하고자 한다. SWAT 구축을 위해 DEM과 토양도 및 토지이용자료와 유역 내 위치한 7개의 기상관측소에 대한 40년(1980~2019)의 기상자료를 수집하여 적용하였으며, SWAT의 검보정을 위해 유역내 위치한 2개의 다목적 댐(안동댐, 임하댐)의 실측 운영자료와 1개의 수위관측소의 유량자료를 수집하였다. PHABSIM의 경우, 안동댐 하류유역에 대한 하천정비기본계획 보고서에 기반하여 지형자료를 입력하였으며 문헌조사를 통해 대상어종의 서식적합도지수를 수집하여 적용하였다. 3개 지점에 대한 SWAT 검보정결과, 평균 R², NSE 및 RMSE는 각각 0.51~0.76, 0.47~0.74, 0.61~1.84 mm/day로 나타났다. PHABSIM과의 연계를 위해 검보정된 SWAT의 하천유량에 대해 유황분석을 실시하였고, 산정한 Q10과 Q355를 유량의 최대·최소 범위로 설정하여 PHABSIM의 유량 경계조건으로 활용하였다. 이를 이용하여 SWAT과 PHABSIM의 연계모델링 적용성을 평가하고 대상어종의 환경생태유량을 산정할 예정이다.

• Journal of Korea Water Resources Association
• /
• v.51 no.2
• /
• pp.141-150
• /
• 2018

The purpose of this study is to evaluate the future hydrologic behavior affected by the potential climate and land use changes in upstream of Anseong-cheon watershed ($366.5km^2$) using SWAT. The HadGEM3-RA RCP 4.5 and 8.5 scenarios were used for 2030s (2020-2039) and 2050s (2040-2059) periods as the future climate change scenario. It was shown that maximum changes of precipitation ranged from -5.7% in 2030s to +18.5% in 2050s for RCP 4.5 scenarios and the temperature increased up to $1.8^{\circ}C$ and $2.6^{\circ}C$ in 2030s RCP 4.5 and 2050s 8.5 scenarios respectively based on baseline (1976-2005) period. The future land uses were predicted using the CLUE-s model by establishing logistic regression equation. The 2050 urban area were predicted to increase of 58.6% (29.0 to $46.0km^2$). The SWAT was calibrated and verified using 14 years (2002-2015) of daily streamflow with 0.86 and 0.76 Nash-Sutcliffe model efficiency (NSE) for stream flow (Q) and low flow 1/Q respectively focusing on 2 drought years (2014-2015) calibration. For future climate change only, the stream discharge showed maximum decrease of 24.2% in 2030s RCP 4.5 and turned to maximum increase of 10.9% in 2050s RCP 4.5 scenario compared with the baseline period stream discharge of 601.0 mm by the precipitation variation and gradual temperature increase. While considering both future climate and land use change, the stream discharge showed maximum decrease of 14.9% in 2030s RCP 4.5 and maximum increase of 19.5% in 2050s RCP 4.5 scenario by the urban growth and the related land use changes. The results supported that the future land use factor might be considered especially for having high potential urban growth within a watershed in the future climate change assessment.

• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.674-678
• /
• 1992

An instrument is described that can obtain directly the whole capacitance vs. potential curve and accurately even in dilute solutions using positive feedback for IR correction. Applying a small (7∼10 mV) triangular signal, controlled rectification of the resulting square wave using sample-and-hold circuit allows one to plot the corrected double layer capacitance over a wide potential range. Several illustrations involving the improved performance characteristics of its applicability are given and its limitations discussed.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.161-169
• /
• 2012

Recently various attempts have been made to apply HSPF model to calculate runoff and diffuse pollution loads of stream and reservoir watersheds. Because the role of standard flow is very important in the water quality modelling of Total Water Pollution Load Management, HSPF was used as a means of estimating standard flow. In this study, BASINS 4.0 and WinHSPF was applied to the Gomakwoncheon watershed, genetic algorithm(GA) and influence coefficient algorithm were used to calibrate the runoff parameters of the WinHSPF. The objective function is the sum of the squares of the normalized residuals of the observed and calculated flow and it is optimized using GA. Estimates of the optimum runoff parameters are made at each iteration of the influence coefficient algorithm. The calibration results showed a relatively good correspondence between the observed and the calculated values. The standard flow(Q275) of the Gomakwoncheon watershed was estimated using the ten years of weather data.