• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.274-274
• /
• 2007

LTCC 소재로 응용을 위해 Mg-Si-O계 세라믹스에 glass frit을 첨가하여 소결 및 마이크로파 유전특성에 관한 연구를 진행하였다. $Mg_2SiO_4$를 기본조성으로 하고 $B_2O_3-ZnO-Na_2O-SiO_2-Al_2O_3$계 glass를 20~40wt%로 첨가하여 $900^{\circ}C$에서 1시간 소결하였을 때 glass 함량이 증가함에 따라 밀도$(g/cm^3)$ 및 유전율$(\varepsilon_r)$은 증가하였고 품질계수$(Q{\times}f_0)$ 값은 감소하는 경향을 보였다. $900^{\circ}C$에서 1시간 소결한 소결체의 유전특성은 유전율 $(\varepsilon_r)$ = 6.5, 품질계수 $(Q{\times}f_0)$ = 4,000(GHz), 온도계수 $({\tau}_f)={\pm}10ppm/^{\circ}C$로 우수한 특성을 확인하였다. 그리고 Glass Milling 효과에 따른 glass-ceramics 소결체의 미세구조, 마이크로파 유전특성을 비교 고찰하였다.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.9
• /
• pp.17-27
• /
• 2016

Parial drainage characteristics of clayey silt with low plasticity from the west coast (Incheon and Hwaseong) was analyzed using CPTU based existing correlation equations and compulsory replacement method. Generally, the estimated $OCRs={\kappa}{\cdot}((q_t-{\sigma}_{vo})/{\sigma}^{\prime}_{vo})$ using Powell and Quartman(1988) were higher than those obtained by the oeodometer tests. These trends were noticeable for the layers containing a lot of silty and sand soils. The assessment of partial drainage conditions was performed through Schnaid et al. (2004)'s equation; it is based on plotting the normalized cone resistance, $Q_t$ versus the pore pressure parameter, $B_q$ in combination with the strength incremental ratio, $s_u/{\sigma}^{\prime}_{vo}$ to the CPTU data. It is evident that more than half of the data fall in the range where $B_q$ < 0.3, corresponding to the domain in which the partial drainage prevails when testing normally consolidated soils at a standard rate of penetration (2 cm/s). To estimate the replacement depth of clayey silt with low plasticity, back analysis was carried out to evaluate the internal friction angle based on where the design depths are equal to the checked depths using bearing capacity equation. The internal friction angels obtained from the back analysis tended to increase as the plasticity index decreases, which is ranged approximately from ${\varphi}^{\prime}=2^{\circ}$ to ${\varphi}^{\prime}=7^{\circ}$.

• The Korean Journal of Pesticide Science
• /
• v.6 no.3
• /
• pp.209-217
• /
• 2002

Two different QSAR methods, the comparative molecular similarity indices analyses (CoMSIA) and hologram quantitative structure activity relationship (HQSAR) are studied for the fungicidal activities ($pI_{50}$) of 2-N-benzyl-5-phenoxy-3-isothiazolone derivatives against sensitive (SPC: 95CC7105) and resisitive (RPC: 95CC7303) phytophthora blight fungus (Phytaphthora capsici). According to the findings from these QSAR investigation, the cross-validation value, $q^2$ and Pearson correlation coefficient, $r^2$ in the two methods were CoMSIA: RPC; $q^2=0.675,\;r^2=0.942$, SPC; $q^2=0.350,\;r^2=0.876$ and HQSAR: RPC; $q^2=0.519,\;r^2=0.869$, SPC; $q^2=0.483,\;r^2=0.990$, respectively. Therefore, the two models of comparative statistical significance were obtained. From the CoMSIA contour maps, the important factors for selective fungicidal activity against RPC are to be expected that the lower hydrophobic and not bulkiness substituent as hydrogen bonding acceptor have to introduce to meta and para-position (C1-C6) on the phenoxy moiety. And the results of prediction suggest that HQSAR method showed higher fungicidal activity than CoMSIA method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.2
• /
• pp.65-71
• /
• 1984

As a primary step in studying the relationship between the arrangement of netting and the section shape of the bag net in the four-seam trawling net, a series of experiments were performed with the simplified model of the bag net made of vinyl film. This model was suspended horizontally in circularly flowing water, with two pairs of suspending threads to four points of symetry at the border of the bag mouth in place of both wing nets. And then, the area distribution of each panel in the bag net was arranged by the portion of the length of the side panel, q to that of the lower or upper panel, p at the border of bag mouth. In the experiments, the section shape of the bag mouth photographed and the tensions on both pairs of suspending threads were measured with two loadcells in circularly flowing water. From the results that the section shape of the bag mouth in circularly flowing water is controlled by the area distribution of panels in the bag net, the author estimated an experimental equation. h/w=k sub(1) e super(k) 2 super(q/p)+C, where h is the central height of the bag mouth, and w is the lateral width of that.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.601-601
• /
• 2015

비홍수기 하천유량관리는 정해진 기준 이상으로 유량을 유지하는 데 목적을 두며 유량관리를 위한 기준유량으로는 하천유지유량이나 하천관리유량이 주로 사용되고 있다. 이들 기준유량과 함께 최근에는 하천 유량 변화를 효과적으로 파악하고 유량변화에 따른 갈수상황을 객관적으로 판단하기 위한 의사결정 도구로 갈수지표가 활용되고 있다. 본 연구에서는 낙동강 주요 홍수예보지점의 하나인 진동지점을 대상으로 유량자료를 수집하고 갈수지표를 이용한 유량평가를 실시하였다. 다양한 갈수지표 중 특정기간을 대상으로 일정시간 가장 낮은 유량을 갈수지표로 활용하는 기법과 동일기간 유량자료의 저유량백분위 기준을 적용하여 이를 갈수임계값으로 활용하는 기법을 적용하였다. 전자는 7Q10(Singh, 1974)이 대표적이며 이는 10년 중 가장 낮은 값을 갖는 7일의 유량이 갈수의 기준이 된다. 본 연구에서는 7Q10의 기간을 20년으로 확대한 7Q20을 적용하였다. 후자는 WMO(2008)에서 적용된 바 있으며 본 연구에서는 1~12월의 월별 저유량90분위(Q90)를 갈수임계값으로 선정하였다. 신뢰할 수 있는 장기유량자료의 활용을 위해 "장기 수문자료 검증 및 평가연구"(한강홍수통제소, 2011)를 통해 수정, 보완된 진동지점의 과거 20년간(1994~2013) 유량자료를 활용하였으며 갈수지표와 함께 유량관리를 위한 기준유량으로 활용되는 하천유지유량(2006년 고시)과 하천관리유량(2013년 기준)의 유량만족도를 비교하였다. 과거 가뭄발생 및 제한급수시기, 강수량 등과 비교했을 때 월별 갈수임계값(Q90)을 갈수지표로 활용한 경우가 갈수관리에 효과적이라 판단되었다. 해당 기법은 통계학적 유의성을 갖기 위해서 장기수문자료의 활용이 필요하나 유량의 시계열 변동특성 반영이 가능하므로 우리나라와 같이 갈수기와 홍수기의 구분이 명확하고 하상계수가 큰 지역에서는 장점을 갖는 것으로 판단된다.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.908-913
• /
• 2000

In the process of integrity evaluation for nuclear power plant components, a series of fracture mechanics evaluation on surface cracks in reactor pressure vessel(RPV) must be conducted. These fracture mechanics evaluations are based on stress intensity factor, K. However, under pressurized thermal shock(PTS) conditions, the combination of thermal and mechanical stress by steep temperature gradient and internal pressure causes considerably high tensile stress at the inside of RPV wall. Besides, the internal pressure during the normal operation produces high tensile stress at the RPV wall. As a result cracks on inner surface of RPVs may experience elastic-plastic behavior which can be explained with J-integral. In such a case, however, J-integral may possibly lose its validity due to constraint effect. In this paper, in order to verify the suitability of J-integral, two dimensional finite element analyses were applied for various surface crack. Total of 18 crack geometries were analyzed, and Q stresses were obtained by comparing resulting HRR stress distribution with corresponding actual stress distributions. In conclusion, HRR stress fields were found to overestimate the actual crack-tin stress field due to constraint effect.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1521-1523
• /
• 2002

본 논문에서는 1.58 ${\times}$ 0.82 ${\times}$ 0.94 $mm^3$크기의 H 형태의 솔레노이드형 RF 칩 인덕터를 코일의 직경과 권선수를 변화시키면서 제작하였고, 그들의 고주파 성능을 비교 분석하였다. 저손실 $Al_2O_3$재료를 코아로 $30{\mu}m{\sim}40{\mu}m$의 여러 직경을 가진 Cu를 코일로 사용하였다. 인덕터의 인덕턴스(L), 품질계수(Q), 저항(R), 임피던스(Z) 그리고 커패시턴스(C) 등의 주파수 특성은 HP4291B로 측정하였다. 실험결과 동일권선수에 대해 코일직경이 자을수록 L, Q, R, 그리고 Z등이 증가하였고, 그 증가폭은 권선수가 클수록 커지는 경향이 있음을 알 수 있었다. 그러나 코일직경이 작을수록 기생 커패시턴스 효과가 빨리 나타나 자기 공진주파수 효과가 감소하는 경향을 보이고 있음을 확인하였다. 코일직경이 $3{\mu}m$이고 권선수가 6인 경우에 대표적인 값들은 다음과 같다. L=31.4nH(at 250MHz), Q=49.6(at 700MHz), R=0.362${\Omega}$(at 1MHz)

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.61-68
• /
• 2001

Turbine blade in nuclear plant is subject to cyclic bending fatigue by high steam pressure. Especially, fatigue fracture is caused by low stress below yielding stress. Photograph by SEM doesn't have striation but photograph by AFM has striation on the fatigue fractured surface of 12% Cr steel used in turbine blade. Surface roughness $R_q$ has the linear relation with respect to stress intensity factor range ΔK and is increased linearly according to load amplitude $\textit{\Delta}P$. In this study loading condition applied to turbine blade is predicted by the relation between the gradient of $R_q$ to $\textit{\Delta}K$ and load amplitude $\textit{\Delta}P$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.75-82
• /
• 2006

In this paper, we design the meander line inductors with high sensitivity and high quality factor(Q) using high characteristic impedance of aperture ground plate. Sensitivity as a frequency is new defined by variation of effective inductance per analysis frequency range instead of self resonance frequency (SRF). An equivalent lumped circuit is derived to explain the characteristic of high frequency inductor. The 4 nH meander line inductor with aperture ground plate has 0.45 nH/GHz of good sensitivity and 86 of Q at 0.7 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.77-80
• /
• 2008

In this paper, low phase noise VCO using novel compact microstrip spiral resonator is proposed. A spiral resonator has super compact dimension, low insertion losses in the passband and high level of rejection in the stopband with sharp cutoff and a large coupling coefficient value, which makes a high Q value, and has reduced the phase noise. To increase the tuning range of VCO, varactor diode has been connected at the tunable negative resistance in VCO. This VCO has presented the oscillation frequency of $5.686{\sim}5.841GHz$, harmonics -29.83 dBc and phase noise of $-115.16{\sim}-115.17dBc/Hz$ at the offset frequency of 100 KHz.