• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.289-298
• /
• 2011

TMAH-based Py-MS has been investigated to apply for a real-time classification of biological agents in the field. Acquiring reproducible data from mass spectrometry is a key to biological detection in the field. Nevertheless, it has been little studied on what factors could affect to the reproducibility of the TMAH-based Py-MS spectrum patterns. Given the TMAH-based Py-MS applied to the field system, several factors which could affect to the reproducible pattern of TMAH-based Py-MS spectra are needed to be examined, including changes in TMAH injection volume, growth temperature for microorganism, and number of cells collected in pyrolyzer, and implication of stabilizer used for lyophilization. This study showed that the reproducibility of the spectrum patterns was significantly hindered by changes in TMAH concentration and cell number, and stabilizer implication but not by growth temperature. Among those at low TMAH concentration(0.015m) was not observed the significant alterations of the spectrum pattern even when its injection volume was changed, yet was in different cell numbers and stabilizer implication.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.93-93
• /
• 2009

In order to overcome the lack of reactivity with hydrogen gas ($H_2$) and utilize unique properties of Carbon Nano Tubes (CNTs) for the application to hydrogen sensors, there have been intensive works on the surface functionalization of CNTs with various types of nanoparticles including Pd. In the present work, we have investigated the effect of dendrimers and Pd nanoparticles to the hydrogen sensing properties of CNTs by comparing three types of samples: Pd/SWNTs (Sample I), Pd/dendrimer/SWNTs (Sample II) and heat-treated Pd/dendrimers/SWNTs (Sample III). As a result of IV measurement under the $H_2$ and air, sample I was found to have a high sensitivity (25%) to $H_2$, but to have a very slow response time (324 s) and recovery rate. On the other hand, Sample II was found to show much faster response time (3 s) and good recovery rate but lower sensitivity (8.6%) than Sample I which is due to induced dipole moments in the dendrimers. Interestingly, Sample III showed both fast response time (7 s) and high sensitivity (25%), indicating that the pyrolysis of the dendrimers during heat treatment which reduce the distance between the surface of the SWNTs and the functionalized Pd nanoparticles plays a key role in improving the sensitivity. The pyrolysis of the dendrimers in Pd nanoparticle-dendrimer-SWNTs was found to enable a significant electrical conductance modulation upon exposure to extremely low concentrations (10 ppm) of $H_2$ in air. Our results demonstrate that the Pd Nanoparticle-Grafted Single-Walled Carbon Nanotubes(SWNTs) with Dendrimers can be used to detect hydrogen, makingoutstanding properties such as fast response, and recovery time, high sensitivity, low detection limit at room temperature compared with other types of hydrogen sensors.

• Preventive Nutrition and Food Science
• /
• 제22권2호
• /
• pp.131-137
• /
• 2017

Maximum production of isoquercetin and quercetin simultaneously from rutin by subcritical water hydrolysis (SWH) was optimized using the response surface methodology. Hydrolysis parameters such as temperature, time, and $CO_2$ pressure were selected as independent variables, and isoquercetin and quercetin yields were selected as dependent variables. The regression models of the yield of isoquercetin and quercetin were valid due to the high F-value and low P-value. Furthermore, the high regression coefficient indicated that the polynomial model equation provides a good approximation of experimental results. In maximum production of isoquercetin from rutin, the hydrolysis temperature was the major factor, and the temperature or time can be lower if the $CO_2$ pressure was increased high enough, thereby preventing the degradation of isoquercetin into quercetin. The yield of quercetin was considerably influenced by temperature instead of time and $CO_2$ pressure. The optimal condition for maximum production of isoquercetin and quercetin simultaneously was temperature of $171.4^{\circ}C$, time of 10.0 min, and $CO_2$ pressure of 11.0 MPa, where the predicted maximum yields of isoquercetin and quercetin were 13.7% and 53.3%, respectively. Hydrolysis temperature, time, and $CO_2$ pressure for maximum production of isoquercetin were lower than those of quercetin. Thermal degradation products such as protocatechuic acid and 2,5-dihydroxyacetophenone were observed due to pyrolysis at high temperature. It was concluded that rutin can be easily converted into isoquercetin and quercetin by SWH under $CO_2$ pressure, and this result can be applied for SWH of rutin-rich foodstuffs.

• 대한기계학회논문집B
• /
• 제28권9호
• /
• pp.1117-1123
• /
• 2004

The characteristics of soot near the soot inception point for an ethene-air flame was carried out in a WSR (well-stirred reactor). The new sampling tool like the temperature controlled filter system was introduced to minimize the condensation during sampling. The new analysis tools applied include the real time size distribution analysis with the Nano-DMA, particle size by transmission electron microscopy, C/H analysis, g filter analysis, and thermogravimetric analysis using both non-oxidative and oxidative pyrolysis. The WSR can generate young soot particles that can be collected and examined to gain insight into inception. For the current conditions, soot does not form for ${\Phi}$=1.9, inception occurs at or before ${\Phi}$=2.0, and inception combined with soot surface growth and/or coagulation occurs for ${\Phi}$=2.1. The filter samples for ${\Phi}$=1.9 are composed of volatile compounds that evolve at relatively low temperatures when heated in the presence or absence of O$_2$. The samples collected from the WSR at ${\Phi}$=2.0 and ${\Phi}$=2.1 are precursor-like in morphology and size. They have higher C/H ratios and lower organic percentages than precursor particles, but they are clearly not fully carbonized soot. The WSR PAH distribution is similar to that in young soot from inverse flames.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1298-1303
• /
• 2004

The characteristics of soot near the soot inception point for an ethene-air flame was carried out in a WSR (well-stirred reactor). The new sampling tool like the temperature controlled filter system was introduced to minimize the condensation during sampling. The new analysis tools applied include the real time size distribution analysis with the Nano-DMA, particle size by transmission electron microscopy, C/H analysis, g filter analysis, and thermogravimetric analysis using both non-oxidative and oxidative pyrolysis. The WSR can generate young soot particles that can be collected and examined to gain insight into inception. For the current conditions, soot does not form for ${\Phi}=1.9$, inception occurs at or before ${\Phi}=2.0$, and inception combined with soot surface growth and/or coagulation occurs for ${\Phi=2.1}$. The filter samples for ${\Phi}$=1.9 are composed of volatile compounds that evolve at relatively low temperatures when heated in the presence or absence of $O_2$. The samples collected from the WSR at ${\Phi}=2.0$ and ${\Phi}=2.1$ are precursor-like in morphology and size. They have higher C/H ratios and lower organic percentages than precursor particles, but they are clearly not fully carbonized soot. The WSR PAH distribution is similar to that in young soot from inverse flames.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.101-101
• /
• 2010

ZnO shows a direct band gap of 3.37eV, large exciton binding energy (~60 meV), high oxidation ability, high sensitivity to many gases, and low cost, and it has been used in various applications such as transparent electrodes, light emitting diodes (LEDs), gas sensors and photocatalysts. Among these applications ZnO as photocatalyst has considerably attracted attention over the past few years because of its high activities in removing organic contaminants generated from industrial activities. In this research, ZnO nanoparticles were synthesized by spray-pyrolysis method using the zinc acetate dihydrate as starting material at synthesis temperature of $900^{\circ}C$ with concentration varied from 0.01 to 1.0M. The physical and chemical properties of the synthesized ZnO nanoparticles were examined by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transformation Infrared (FT-IR), and UV-vis spectroscopy. The Miller indices of XRD patterns indicate that the synthesized ZnO nanoparticles showed a hexagonal wurtzite structure. With increased precursor concentration, a primary, secondary particle sizes of ZnO nanoparticles increased by 0.8 to $1.5{\mu}m$ and 15 to 35nm, and their crystallinity was improved. Methyleneblue (MB) solution ($1{\mu}M$) as a test comtaminant was prepared for evaluating the photocatalytic activities of ZnO nanoparticles synthesized in different precursor concentration. The results show that the photocatalytic efficiency of ZnO nanoparticles was gradually enhanced by increased precursor concentration.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.178-189
• /
• 1994

$BaTiO_3$ 미분말은 여러종류의 0.05 M 출발용액으로부터 초음파 분무 열분해법으로 합성하였다. 이때, 유속은 0.5 cm/sec, 저온로는 $300^{\circ}C$, 고온로는$700^{\circ}C$로 고정하였다. 입자의 형성과정은 반응 단계별로 포집된 분말을 SEM으로 직접 관찰하였고 또한, 반응기내에서의 입자의 거동을 이론적으올 고찰하고자 하였다. 순수한 $BaTiO_3$ 미분말은 출발용액이 nitrate aqueous solution인 경우에 합성이 가능하였다. 합성된 미분말은 19.1 nm의 일차입자들로 구성된 porous한 약 $0.42 {mu}m$크기의 구형의 이차임자였다. 형성과정은 건조단계에서 입자의 크기가 감소한 후 열분해 초기단계에서 증가하고 반응이 진행됨에 따라 점차 다시 감소하여 최종 $0.42 {mu}m$의 고화된 입자로 되었고 입도분포는 반응이 진행됨에 따라 점차 넓어졌다. 또한, 반응기내에서 입자들의 이론적 거동은 반응기 중심쪽으로 향하여 진행된다.

• 대한기계학회논문집B
• /
• 제36권7호
• /
• pp.759-765
• /
• 2012

1.7L 커먼레일 직접분사 디젤 엔진을 이용하여 1500rpm 3.9bar BMEP 조건에서 세가지 연소 전략에 따른 배기가스 배출 특성 및 탄화수소 종 분석을 수행하였다. 첫째 전략은 EGR 을 사용하지 않고 연료 분할 분사를 이용하는 방법(split injection), 둘째는 적절한 EGR 적용 및 단일 연료분사 방법(single-1)이며 셋째는 다량의 EGR 및 레일 압력 증대 등을 통한 저온디젤연소(single-2)이다. 본 실험 조건으로부터 split injection 방법과 single-1 방법은 PM-NOx 상반 관계를 보였고, single-2 방법은 PM-NOx 상관관계에서 벗어나 PM 및 NOx 동시 저감이 가능하였다. 탄화수소 종 분석 결과, THC 배출 경향과 동일하게 탄소번호에 관계없이 split injection 이 가장 적은 배출을 보였고, single-1 그리고 single-2 의 순서로 많이 배출하였다. 메탄, 아세틸렌 및 CO 의 THC 에 대한 비율은 공연비가 농후해 짐에 따라서 증가하였고 이는 공연비가 농후에 따른 연소 영역에서 산소 농도 감소로 열해리가 증가하였기 때문이다.

• 공업화학
• /
• 제27권6호
• /
• pp.646-652
• /
• 2016

바이오매스는 최근 화석연료의 고갈 및 지구온난화 등의 문제에 대응하기 위한 신재생에너지원으로 많은 관심을 받고 있다. 바이오오일은 폐목재, 농업 및 임업 부산물 등의 바이오매스로부터 급속열분해 과정을 통하여 생산되는 액체연료이다. 바이오오일은 일반적인 석유 계통의 연료에 비하여 점도가 매우 높고 고체상의 불순물을 포함하고 있어 버너 적용시 스프레이 분무 특성이 저하된다. 또한, 바이오오일은 셀룰로오스, 헤미셀룰로오스, 리그닌으로부터 유래되는 수백 종류의 화학종들로 이루어져 있어 일반적인 액체연료와는 액적의 증발 특성이 뚜렷하게 구분된다. 본 연구에서는, 바이오오일의 구성 성분을 아세트산, 레보글루코산, 페놀, 수분으로 단순화하여 액적의 증발 특성에 관한 수치해석적 연구를 수행하였다. 다양한 주위공기 온도, 액적의 초기 지름, 에탄올 혼합 비율에 대하여 액적의 증발 특성을 비교하였다. 주위공기 온도가 높아질수록 바이오오일 액적의 증발 시간은 짧아졌으며, 특히 낮은 온도 범위에서는 증발 시간이 공기온도에 매우 민감하였다. 또한 액적의 지름이 감소할수록, 에탄올 혼합 비율이 증가할수록 증발 시간이 단축됨을 알 수 있었다.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.75-82
• /
• 2016

급속열분해 기술은 바이오매스를 수송용 연료와 고품질의 석유화학 생산물로 업그레이드 할 수 있는 바이오오일을 만드는 유망한 수단으로 주목 받고 있다. 이러한 기대에도 불구하고 연료와 석유화학 생산물의 상업성은 바이오오일의 높고 잘 변하는 점도, 많은 수분과 산소 함량, 낮은 발열량 및 산성도와 같은 상당히 바람직하지 않은 특징 때문에 한계가 있다. 그래서 본 연구는 가압증류를 통해 바이오오일의 품질 개선을 목표로 수행하였다. 가압증류에 따른 바이오오일의 특성 변화를 알아보기 위하여 0.8~1.4 mm 크기의 굴참나무(Quercus variabilis) 시료 600 g을 $465^{\circ}C$에서 1.6초 동안 급속열분해하여 바이오오일을 제조하고, 감압증류(100hPa) 온도는 대조구, $40^{\circ}C$, 50, 60, 70 및 80에서 각각 30분간 처리하였다. 급속열분해를 통해 생산된 바이오오일, 바이오차 및 가스는 각각 62.6 wt%, 18.0 및 19.3으로 나타났다. 또한 온도별로 생성된 바이오오일은 수분함량 0.9~26.1 wt%, 점도 4.2~11.0 cSt, 발열량 3,893~5,230 kcal/kg 및 pH 2.6~3.0 수준으로 긍정적 효과가 나타났다. 이러한 바이오오일 품질개선에도 불구하고 점도는 반대로 증가했으며 여전히 높은 산소 함량, 낮은 발열량 및 산성도 때문에 바이오오일을 실용적인 연료로 사용하기 위해서는 지속적으로 품질 개선이 필요하다.