• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.676-685
• /
• 2016

본 연구는 폴리스타렌(PS) 수지의 유화공정 효율성 향상을 위해 저온열분해 회분식 반응기를 이용하여, 단일 PS 수지와 Co 및 Mo 촉매를 각각 첨가한 PS 수지를 반응온도(425, 450, $475^{\circ}C$), 반응시간(20~80분, 15분 간격), 촉매 농도변화에 따른 PS수지의 액화생성물 전환율을 측정하였다. 최적의 열분해 조건은 반응온도 $450^{\circ}C$, 반응시간 35분으로 판단되며, 전환된 액화생성물의 주요 성분은 GC/MS 분석결과 스타이렌 및 벤젠유도체가 대부분으로 나타났다. 생성물은 산업통상자원부에서 고시한 증류성상 온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하여 그 수율을 측정하였다. 그리고 $450^{\circ}C$ 반응온도에서 촉매 사용에 따른 전환율은 Co 촉매 > Mo 촉매 > 무촉매 순이었으며, 생성물 중 가스, 등유, 경유수율은 Mo 촉매, 가솔린은 무촉매, 중유는 Co 촉매에서 우수한 것으로 나타났다. Co 및 Mo 촉매 혼합 농도별 전환율 및 열분해 생성물 수율은 Co 촉매 100% 사용 시 가장 우수한 것으로 판단된다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권5호
• /
• pp.217-220
• /
• 2005

We have fabricated a superconducting YBCO system according to the pyrolysis method and low pressure apparatus. In our experiment, the X-ray diffraction pattern of the non doped YBaCuO layer indicated that the superconductor contained only 90K phase crystal. The critical temperature and critical current density for a thick layer at $650^{\circ}C$ were Tc=90 K and $Jc=6{\times}10^{4}A/cm^2$ at 90K. In low pressure apparatus, the 90 K phase YBaCuO was grown at a lower temperature compared with the normal system. Tc and Jc at $650^{\circ}C$ were Tc = 90 K and $Jc=6{\times}10^{4}A/cm^2$ at 90K.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.538-542
• /
• 2006

Nano-sized cobalt oxide powders were prepared by low pressure spray pyrolysis process. The precursor powders obtained by low pressure spray pyrolysis process from the spray solution with ethylene glycol had several microns size and hollow structure. The precursor powders obtained from the spray solution with optimum concentration of ethylene glycol formed the nano-sized cobalt oxide powders with regular morphology after post-treatment without milling process. On the other hand, the cobalt oxide powders obtained from the spray solution without ethylene glycol had submicron size and spherical shape before and after posttreatment. The mean size of the cobalt oxide powders formed from the spray solution with concentration of ethylene glycol of 0.7M was 180 nm after post-treatment at temperature of $800^{\circ}C$. The mean size of the powders could be controlled from several tens nanometer to micron sizes by changing the post-treatment temperatures in the preparation of cobalt oxide powders by low pressure spray pyrolysis process.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.199-203
• /
• 1998

$Pb(Zr, Ti)O_3$ (Pb:Zr:Ti=1:0.52:0.48) thin films were prepared on single crystal MgO(100) substrates by dipping-pyrolysis process using a solution of constituent metal naphthenates as starting materials. The solution was spin-coated onto substrate and the precursor films were pyrolyzed at $200^{\circ}C$ in air or at $200^{\circ}C$ in argon for 1, 2, 5 and 24h, followed by final heat treatment at $750^{\circ}C$. For all the films, highly (h00)/(00l)-oriented Pb$Pb(Zr, Ti)O_3$ thin films with smooth surfaces and crack-free were obtained, whereas thin film pyrolyzed in air for 24 h exhibited polycrystalline character. According to the pole-figure analysis, epitaxy of the product films was found to depend on pyrolysis atmosphere.

• Korean Chemical Engineering Research
• /
• 제49권4호
• /
• pp.417-422
• /
• 2011

ABS 수지의 반응온도 및 반응시간에 따른 저온 열분해를 연구하기 위하여 ABS 수지의 저온열분해를 회분식 반응기를 이용하여 상압하에서 $425{\sim}500^{\circ}C$ 영역에서 수행하였다. 열분해 시간은 20~80분까지 하였고 열분해로 생성된 성분은 지식경제부에서 고시한 증류성상온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하였다. ABS 수지의 열분해에서 80% 이상의 전환율을 얻기 위해서는 반응온도 $500^{\circ}C$ 이상에서 반응시간 60분 이상을 유지하여야 한다. 최종적으로 생성된 분해유는 가스 중유 > 가솔린 > 경유 > 등유 순으로 나타났으며, 온도와 반응시간이 증가함에 따라 중유 및 경유 성분이 늘어났다.

• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.46-54
• /
• 1993

$\beta$-SiC was chemically vapor deposited by pyrolysis of MTS＋H2 gas mixture. The experiments were conducted in the temperature range of 1100~150$0^{\circ}C$ with a r.f. induction furnace under atmospheric pressure. The IR, XRD, EDS and AES analysis revealed that the free Si was always codeposited with SiC below 140$0^{\circ}C$, regardless of the total flow rate and MTS concentration, whereas $\beta$-SiC single phase was deposited at 150$0^{\circ}C$. C3H8 or CH2Cl2 as an excess C sources, was supplied with MTS in order to obtain stoichiometric SiC at low temperature. With the addition of C3H8 or CH2Cl2, the deposition rate was increased and $\beta$-SiC single phase could be deposited even at temperature as low as 110$0^{\circ}C$. In the absence of C3H8 or CH2Cl2, the microhardness of the layer was quite low (

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.220-225
• /
• 2012

YAG:Ce yellow phosphor particles were synthesized by spray pyrolysis with changing the solution properties and their luminous properties, crystal structure, and morphological changes were studied by using PL measurement, XRD, and SEM analysis. It was clear that the solution properties significantly affected the crystal phase, crystallite size, the PL intensity, and the morphology of YAG:Ce particles. At low calcination temperature, the addition of urea only to the spray solution was helpful to form a pure YAG phase without any impurity phases, as the result, the highest luminescence intensity was achieved at the calcination temperature of $900^{\circ}C$. When the calcination temperatures were larger than $1300^{\circ}C$, however, the YAG particles prepared without any additive showed the highest luminescent intensity. Regardless of the solution conditions, the emission intensity of YAG:Ce particles prepared by spray pyrolysis showed a linear relation with the crystallite size. In terms of the morphology of YAG:Ce particles, the addition of both DCCA and $NH_4OH$ to the spray solution was effective to prepare a spherical and dense structured YAG particles.

• 청정기술
• /
• 제15권2호
• /
• pp.109-115
• /
• 2009

폴리에틸렌-폴리프로필렌 혼합물의 열분해에 대한 시너지효과를 조사하기 위하여 폴리에틸렌(PE)과 폴리프로필렌(PP) 및 PE-PP혼합물의 저온열분해를 회분식 반응기를 이용하여 상압 및 $450^{\circ}C$에서 실행하였다. 열분해 시간은 20${\sim}$80분이었으며, 열분해로 생성된 성분은 한국석유품질검사소에서 고시한 증류성상온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하였다. GC/MS에 의한 생성오일의 성분분석 결과 PE-PP 혼합에 의해서 새로운 성분이 검출되지 않았고 혼합에 따른 시너지효과 또한 나타나지 않았다. PE-PP 혼합물의 전환율과 각 생성물의 수율은 시료의 혼합비율에 비례하였다.

• 청정기술
• /
• 제16권1호
• /
• pp.26-32
• /
• 2010

폴리프로필렌-폴리스타이렌 혼합물의 열분해에 대한 시너지효과를 조사하기 위하여 폴리프로필렌(PP)과 폴리스타이렌(PS) 및 PP-PS혼합물의 저온열분해를 회분식 반응기를 이용하여 상압 및 $450^{\circ}C$에서 실행하였다. 열분해 시간은 20~80분까지 하였고 열분해로 생성된 성분은 지식경제부에서 고시한 증류성상온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하였다. GC/MS(Gas chromatography/Mass spectrometry)에 의한 생성오일의 성분 분석은 PP-PS 혼합에 의해서 새로운 성분이 검출되지 않았음을 보여주었다. PP-PS 혼합물의 열분해 생성물의 분석결과, 혼합에 따른 시너지효과 또한 나타나지 않았다. PP-PS 혼합물의 중유수율을 제외한 각 생성물의 수율은 시료의 혼합비율에 비례하였다. 중유수율은 혼합비에 관계없이 거의 일정하게 나타났다.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.495-502
• /
• 2008

To investigate the synergy effect on the pyrolysis of mixture of polyethylene(PE) and polystyrene(PS), the pyrolysis of PE, PS and the mixture of PE-PS was carried out in a batch reactor at the atmospheric pressure and $450^{\circ}C$. The pyrolysis time was from 20 to 80 mins. The liquid products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the distillation temperatures based on the petroleum product quality standard of Korea Institute of Petroleum Quality. The analysis of the product oils by GC/MS showed that the new components produced by mixing were not detected. The synergy effect according to mixing of PE and PS did not also appear. The conversion and yield of mixtures were in proportion to the mixing ratio of sample.