• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.428-433
• /
• 2010

This paper proposes a harmonics reduction technique for the input currents of three phase PWM converters. The quality of the phase angle information on the utility voltage connected to the PWM converters affects their control performance. Under a distorted utility voltage, the extracted phase angle based on the synchronous reference frame PLL method is distorted. This causes large harmonics in the input currents of a PWM converter. In this paper, a harmonics reduction method that makes the input currents in the PWM converter sinusoidal even under distorted utility conditions is proposed. By the proposed method, without additional hardware, the THD (Total Harmonic Distortion) of the input currents can be readily limited to below 5% which is the harmonic current requirements of IEEE std. 519. Its validity is verified by simulations and experimental results.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.41-42
• /
• 2014

본 논문에서는 종전의 3상 PWM 정류기의 문제점을 극복하기 위하여 3상 Z-Source PWM 정류기를 제안하였다. 제안된 정류기는 시스템의 간소화, 안정화, 비용상승을 고려하여 상태관측기가 적용된 센서리스 제어 기법을 적용하였다. 3상 Z-Source PWM 정류기는 교류측 전압센서 없이 DC-link단 전압센서와 입력단 전류 센서만을 이용하여 교류측 전압을 추종한다. 제안된 3상 Z-Source PWM 정류기는 PSIM 시뮬레이션을 통하여 검증 하였다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.69-70
• /
• 2012

본 논문은 LCL 필터의 능동댐핑을 적용한 3상 4선식 PWM 정류기 제어 방법을 제안한다. 3상 4선식 PWM 정류기의 입력단에 위치한 LCL 필터는 단일 L 필터에 비해 필터 사이즈, 무게 감소와 입력 전류의 고조파 성분 감쇠 등에 장점을 가지고 있다. 그러나 LCL 필터의 공진 주파수의 영향으로 PWM 정류기 제어 안정성 문제를 가지고 있다. 이러한 문제를 해결하기 위해서는 LCL 필터에 능동댐핑을 적용하여 PWM 정류기 제어 안정성을 향상 시킨다. 시뮬레이션 결과를 통해 본 논문이 제안한 제어 방법의 실효성을 검증한다.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.311-314
• /
• 1995

PWM(Pulse-Width Modulation) is frequently used as control method for inverter. In control of active silencer studied presently, PWM control method can be applied. This paper presents its possibility. As operating source of loudspeaker, inverter is used instead of audio amplifier and PWM controller controls the inverter to make canceling sound. This paper presents that active silencer of inverter-type using the PWM control method makes the canceling sound to acoustic noise and cancels the acoustic noise.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1552-1557
• /
• 2007

In this work, temperature stable pulse width modulation controller using bandgap reference voltage is proposed. Two bandgap reference voltages are designed by using BiCMOS technology which are temperature dependent and independent voltage references. PWM controller is designed by using 3.3 volt supply voltage and the output frequency is 1MHz. From simulation results, the variation of output pulse width is less than form +0.86% to -0.38% in the temperature range $0^{\circ}C\;to\;70^{\circ}C$.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.28 no.1
• /
• pp.8-14
• /
• 2023

This paper proposes a PFC converter with a double step-up function using an asymmetrical PWM scheme. For the conventional PWM scheme, the input voltage range, which maintains a double step-up function, is limited because the proposed converter has different voltage gains and characteristics when the duty ratio(D) is less than 0.5. The proposed converter has a constant voltage gain regardless of the magnitude of the input voltage and can achieve output voltage balancing by using the asymmetrical PWM scheme. A 1.6-kW prototype of the proposed converter was built and tested to verify the performance.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.239-241
• /
• 2020

MSIS(Modular Scalable Inverter System)에서 모터 구동 시 발생하는 고주파 성분의 순환 전류는 구동 시스템의 효율 및 신뢰성을 저하시키기 때문에, 이를 저감하기 위한 PWM(Pulse Width Modulation) 동기화 기법의 구현이 필수적으로 요구 된다. 본 논문은 MSIS에서 PWM 동기화 기법을 적용하기 위한 모터 구동 인버터용 제어보드의 설계에 관한 것이다. 제어보드 간 PWM 동기화 기법을 적용하기 위해 DSP(Digital Signal Processor)의 EPWMSYNC를 활용하였다. EPWMSYNC은 서로 다른 DSP간 PWM의 위상을 동기화하는 기능으로 DSP의 EPWMSYNCO과 EPWMSYNCI를 사용한다. 설계한 제어보드는 EPWMSYNC 신호를 광케이블을 통해 다른 제어보드로 연결할 수 있도록 설계하여, 제어보드 간의 절연과 잡음의 영향을 최소화했다. 본 논문에서 설계한 제어보드의 EPWMSYNC를 시험하였으며, 600W급 IPMSM(Interior Permanent Magnet Synchronous Motor)을 부하로 사용하는 시스템에서 설계된 제어보드의 유효성을 검증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.530-536
• /
• 2000

• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.300-302
• /
• 1985

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.35-40
• /
• 2012

In DC-DC converters, a PWM/PFM dual mode control method is commonly used to maintain a high efficiency over a wide range of load variation. Since the control mode is selected according to the load condition, the chip area is increased due to additional circuit for mode control and the optimum efficiency cannot be achieved around the mode transition point. To solve such problems, a new integrated control method is proposed in this paper, in which a PLL is used in the current mode PWM control circuit instead of an oscillator. The proposed integrated control method is verified through a design of a buck converter using PSIM simulation. Simulation of the complete buck converter circuit by Cadence Spectre showed a maximum efficiency of 94.7% at a load current of 250mA and an efficiency of 85.4% at a load current of 10mA under the light load condition.