• Korean Journal of Environment and Ecology
• /
• v.24 no.3
• /
• pp.249-257
• /
• 2010

The purpose of this paper is to weigh the possibility of endangered Jang-hang wetland at the estuary of Han River to be included on the Ramsar List of Wetlands of International Importance and come up with ways to manage the wetland depending on its biotope patterns. The target area is located between Gimpo bridge and Isanpo I.C. with about $2.7km^2$ area. Through the analysis of RIS(Information Sheet for Ramsar Wetlands), it was known that the wetland is located on the sedimentary topography and formed as a result of sediment at the estuary of the river owing to the concentration of rainfall during summer. The vegetation environment in the area is divided into brackish water and fresh water areas depending on salinity. Rhizosphere soil(RS) of the area was analyzed to be Silt loam while bottom RS to be Sand loam. The plant ecology was composed of 52 families 135 species and 11 varieties and 146 types. Among indigenous species found are Salix koreensis, Phragmites communis and Miscanthus sacchariflorus. The analyzed results of the actual vegetation showed that willow community accounts for 37% of the area and rice field is 13.5%. As for animal ecology, total of 62 species and 25,977 individual wild birds were observed. After comparing and analyzing the RIS we compiled with the Ramsar Site designation standards, it turns out that the Jang-hang wetland meets criteria 1(biographic region), criteria 2,3 and 4(species and ecological communities) and criteria 5 and 6(water birds). Thus, Jang-hang wetland is eligible for the Ramsar site. As a result of establishing and evaluating the biotope types for setting management areas, Jang-hang wetland has a total of 13 different types, and the grade I represents 75.4% of the area while the grade III 0.8% of the land status. We categorized four management zones for the wetland depending on the biotope patterns - preservation, restoration, use and buffer zones and suggested management methods for each zone.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.98-113
• /
• 2007

Objective: The purpose of this study was to evaluate the displacement pattern and the stress distribution shown on a finite element model 3-D visualization of a dry human skull using CT during the retraction of upper anterior teeth. Methods: Experimental groups were differentiated into 8 groups according to corticotomy, anchorage (buccal: mini implant between the maxillary second premolar and first molar and second premolar reinforced with a mini Implant, palatal: mini implant between the maxillary first molar and second molar and mini implant on the midpalatal suture) and force application point (use of a power arm or not). Results: In cases where anterior teeth were retracted by a conventional T-loop arch wire, the anterior teeth tipped more postero-inferiorly and the posterior teeth moved slightly in a mesial direction. In cases where anterior teeth were retracted with corticotomy, the stress at the anterior bone segment was distributed widely and showed a smaller degree of tipping movement of the anterior teeth, but with a greater amount of displacement. In cases where anterior teeth were retracted from the buccal side with force applied to the mini implant placed between the maxillary second premolar and the first molar to the canine power arm, it showed that a smaller degree of tipping movement was generated than when force was applied to the second premolar reinforced with a mini implant from the canine bracket. In cases where anterior teeth were retracted from the palatal side with force applied to the mini implant on the midpalatal suture, it resulted in a greater degree of tipping movement than when force was applied to the mini implant between the maxillary first and second molars. Conclusion: The results of this study verifies the effects of corticotomies and the effects of controlling orthodontic force vectors during tooth movement.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.183-196
• /
• 2017

Objective: The purpose of this research was to assess the agreement between job physical risk factor analysis by ergonomists using ergonomic methods and physical examinations made by occupational physicians on the presence of musculoskeletal disorders of the upper extremities. Background: Ergonomics is the systematic application of principles concerned with the design of devices and working conditions for enhancing human capabilities and optimizing working and living conditions. Proper ergonomic design is necessary to prevent injuries and physical and emotional stress. The major types of ergonomic injuries and incidents are cumulative trauma disorders (CTDs), acute strains, sprains, and system failures. Minimization of use of excessive force and awkward postures can help to prevent such injuries Method: Initial data were collected as part of a larger study by the University of Utah Ergonomics and Safety program field data collection teams and medical data collection teams from the Rocky Mountain Center for Occupational and Environmental Health (RMCOEH). Subjects included 173 male and female workers, 83 at Beehive Clothing (a clothing plant), 74 at Autoliv (a plant making air bags for vehicles), and 16 at Deseret Meat (a meat-processing plant). Posture and effort levels were analyzed using a software program developed at the University of Utah (Utah Ergonomic Analysis Tool). The Ergonomic Epicondylitis Model (EEM) was developed to assess the risk of epicondylitis from observable job physical factors. The model considers five job risk factors: (1) intensity of exertion, (2) forearm rotation, (3) wrist posture, (4) elbow compression, and (5) speed of work. Qualitative ratings of these physical factors were determined during video analysis. Personal variables were also investigated to study their relationship with epicondylitis. Logistic regression models were used to determine the association between risk factors and symptoms of epicondyle pain. Results: Results of this study indicate that gender, smoking status, and BMI do have an effect on the risk of epicondylitis but there is not a statistically significant relationship between EEM and epicondylitis. Conclusion: This research studied the relationship between an Ergonomic Epicondylitis Model (EEM) and the occurrence of epicondylitis. The model was not predictive for epicondylitis. However, it is clear that epicondylitis was associated with some individual risk factors such as smoking status, gender, and BMI. Based on the results, future research may discover risk factors that seem to increase the risk of epicondylitis. Application: Although this research used a combination of questionnaire, ergonomic job analysis, and medical job analysis to specifically verify risk factors related to epicondylitis, there are limitations. This research did not have a very large sample size because only 173 subjects were available for this study. Also, it was conducted in only 3 facilities, a plant making air bags for vehicles, a meat-processing plant, and a clothing plant in Utah. If working conditions in other kinds of facilities are considered, results may improve. Therefore, future research should perform analysis with additional subjects in different kinds of facilities. Repetition and duration of a task were not considered as risk factors in this research. These two factors could be associated with epicondylitis so it could be important to include these factors in future research. Psychosocial data and workplace conditions (e.g., low temperature) were also noted during data collection, and could be used to further study the prevalence of epicondylitis. Univariate analysis methods could be used for each variable of EEM. This research was performed using multivariate analysis. Therefore, it was difficult to recognize the different effect of each variable. Basically, the difference between univariate and multivariate analysis is that univariate analysis deals with one predictor variable at a time, whereas multivariate analysis deals with multiple predictor variables combined in a predetermined manner. The univariate analysis could show how each variable is associated with epicondyle pain. This may allow more appropriate weighting factors to be determined and therefore improve the performance of the EEM.

• Childhood Kidney Diseases
• /
• v.2 no.2
• /
• pp.138-144
• /
• 1998

Purpose : The use of cyclosporine and mitomycin in various immunologic or neoplastic disorders has been known to cause wide-ranged nephrotoxic effects including thrombotic microangiopathy. However, the mechanism of nephrotoxicity of these drugs has not been studied adequately, so that present experimental study has been undertaken to find out whether these drugs can cause direct damage to the kidney and to clarify the pathogenetic mechanism of nephrotoxic effect of these drugs. Materials and methods : Sprague-Dawley rats weighing 250-300 gm were used for experimental animals and unilateral renal perfusion technique, modified from the method described by Hoyer et al was used. Isolation of left kidney from systemic circulation was made by clamping aorta and left renal vein and a hole was punctured in the anterior wall of the left renal vein. Cyclosporine (2.5 mg in 4 ml solution) and mitomycin (1.6 mg in 4ml solution) were infused through left renal artery and normal saline was used in control rats. Forty-eight hours after infusion of the drugs, animals were sacrificed and left kidney removed and processed for histologic examination. Total ischemic time of left kidney was less than 15 minutes: Results : Cyclosporine-perfused group showed severe swelling of glomerular endothelial ceil along with swelling of glomerular epithelial cell and interstitial vascular endothelial cell. Mitomycin-perfused group also showed severe swelling of glomerular endothelial and epithelial cells. And in addition to these findings, they demonstrated platelets aggregation, swelling and degranulation of platelets and fibrin accumulation in some of the capillaries, indicating occurrance of thrombotic microangiopathy. Conclusion : present experiment indicates that cyclosporine and mitomycin can cause direct toxic injury to renal endothelial cell. And this direct toxic damage to endothelial cell seems to be an important initiating event for the development of thrombotic microangiopathy.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.11 no.2
• /
• pp.143-149
• /
• 2008

Purpose: To estimate the long-term therapeutic efficacy and safety of adefovir dipivoxil in children and adolescents with chronic hepatitis B who have developed lamivudine resistance. Methods: Sixteen patients (12 boys and 4 girls; ages 4.3~20.9 years; mean age 14.2 years) with chronic hepatitis B infection resistant to lamivudine therapy received adefovir (0.3 mg/kg/day, maximal dose 10 mg) orally for at least 9 months between March 2004 and April 2008. Each patient was followed up for a mean period of 27 months (range 9~49 months) until April 2008 at Kyungpook National University Hospital in Korea. Therapeutic responses to adefovir were evaluated at 12, 24, 36, and 48 months from the initiation of therapy using the Kaplan-Meier method. Response measurements included ALT normalization, HBV DNA negativization, 2 $log_{10}$ IU/mL decrement of HBeAg titer, HBeAg loss, and HBeAg/Ab seroconversion rate. Results: Three (18.8%) of the 16 patients treated with adefovir showed HBeAg/Ab seroconversion. Kaplan-Meier estimates of cumulative ALT normalization were 12.5% (12 months), 43.8% (24 months), 63.5% (36 months), and 92.7% (48 months), respectively. Cumulative HBV DNA negativization was 6.7%, 30.0%, 45.6%, and 78.2% at 12, 24, 36, and 48 months, respectively. Cumulative 2 $log_{10}$ copies/mL decrement of HBeAg titer was 12.5%, 43.8%, 56.3%, and 86.9% at 12, 24, 36, and 48 months, respectively. Cumulative HBeAg loss and HBeAg/Ab seroconversion were 6.7% (12 months) and 22.2% (24 months), respectively. Conclusion: The long-term therapeutic efficacy of adefovir dipivoxil was favorable in children and adolescents with chronic hepatitis B who had developed lamivudine resistance. The long-term use of adefovir should be safe in children.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.493-502
• /
• 2012

Objectives: The purpose of this study is to investigate the mass concentration of nanoparticles and understand the characteristics of elements of heavy metal concentrations within nanoparticles in the air using Micro-Orifice Uniform Deposit Impactor Model-110 (MOUDI-110), based on indoor and outdoor air. Methods: This Study sampled nanoparticles using MOUDI-110 indoors (office) and outdoors at S University in Asan, Korea in order to reveal the concentration of nanoparticles in the air. Sampling continued for nine months (10 times indoors and 14 times outdoors) from March to November 2010. Mass concentrations of nanoparticle and concentrations of heavy metals (Al, Mn, Zn, Ni, Cu, Cr, Pb) were analyzed. Results: Indoors, geometric mean concentration of nanoparticles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 0.929 ${\mu}g/m^3$ and 1.002 ${\mu}g/m^3$, respectively. On the other hand, the levels were lower outdoors with 0.819 ${\mu}g/m^3$ and 0.597 ${\mu}g/m^3$. Mann-Whitney U tests showed that the difference between the indoors and the outdoors was statistically meaningful in terms of particles of 0.056 ${\mu}m$ or less (p<0.05) in size. These results are possibly influenced by the use of printers and duplicators as the factor that increased the concentration of nanoparticles. In seasonal concentration distribution, the level was higher during the summer compared to in the autumn. Those of 0.056 ${\mu}m$ or less in size presented a statistically meaningful difference during the summer (p<0.05). These results may be influenced by photochemical event as the factor that makes the levels high. Regarding zinc, among the other heavy metals, the fine particles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 1.699 $ng/m^3$ and 1.189 $ng/m^3$ in the outdoors. In the indoors, the levels were lower, with 0.745 $ng/m^3$ and 0.617 $ng/m^3$. Cr and Ni at the size of 0.056 ${\mu}m$ or less, both of which have been known to pose severe health effects, recorded higher concentrations indoors with 0.736 $ng/m^3$ and 0.177 $ng/m^3$, compared to 0.444 $ng/m^3$ and 0.091 $ng/m^3$ outdoors. By season, Zn, Ni, Cu and Pb posted a high level of indoor concentration during the fall. As for Cr, the level of concentration indoors was higher than outdoors both during the summer and the autumn. Conclusion: This study indicates the result of an examination of nano-sized particles and heavy metal concentrations. It will provide useful data for the determination of basic nanoparticle standards in the future.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.121-125
• /
• 2011

Purpose: The DNA-type virus HBV, discovered by D. Dane and others in 1976, is approximately 42nm big and known as the main cause of liver-related diseases around the world. HBsAg has 4 kinds of subtypes including adw, adr, ayw and ayr and besides common antigen factor a, there are d, y, r, w. From the methods of serologically testing HBV, IRMA, EIA and CLIa were developed for testing HBsAg and are being used in examining the surface antigen of HBV. In this study, among the methods for testing HBV, the recently developed RIAKEY Ultrasensitive HBsAg IRMA kit's sensitivity level and performance in detection of mutant forms were measured and compared with CLIA. Materials and methods: Two certified reference materials, which are WHO 1st International Standard 1985(80/549) and WHO 2nd International Standard 2003(00/588. subtype adw2, genotypeA), were used in the examination and the sensitivity level was measured by diluting these materials from 0.08 IU/ml to 0.005 IU/ml. The materials for examining the detection of mutant forms included 9 kinds of subtype 'ad' and one kind of subtype 'ay' purchased from DSI company. Also, with the use of positive and negative samples, they was compared with CLIA. Result: Ultrasensitive HBsAg kit based on IRMA method showed the detection of up to 0.01 IU/ml not only for WHO 1st International Standard 1985(80/549) but also for WHO 2nd International Standard 2003(00/588. subtype adw2, genotypeA) and the sensitivity level was measured as 0.01 IU/ml by WHO standard. In testing the performance for detection of mutant forms, the 9 kinds of subtype 'ad' and one kind of subtype 'ay' mutant materials were detected, demonstrating the capacity of detecting various types of mutant forms. Conclusions: With the clinical importance of sensitivity level and performance in detection of mutant forms increasing in the field of HBsAg diagnosis, the examination of IRMA's effectiveness using RIA method in the aspects of the sensitivity level and performance in detection of mutant forms was carried out and its result is as follows. The sensitivity level was measured as 0.01 IU/ml by WHO standard and it was possible to measure various types of mutant forms with high sensitivity. Thus it is suggested that more speedy and accurate reports could be produced from a nuclear medicine laboratory for clinical practitioners requiring results of various situations.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.193-215
• /
• 2016

In recent years, the proliferation of diverse social networking services has led users to use many mediums simultaneously depending on their individual purpose and taste. Besides, while collecting information about particular themes, they usually employ various mediums such as social networking services, Internet news, and blogs. However, in terms of management, each document circulated through diverse mediums is placed in different categories on the basis of each source's policy and standards, hindering any attempt to conduct research on a specific category across different kinds of sources. For example, documents containing content on "Application for a foreign travel" can be classified into "Information Technology," "Travel," or "Life and Culture" according to the peculiar standard of each source. Likewise, with different viewpoints of definition and levels of specification for each source, similar categories can be named and structured differently in accordance with each source. To overcome these limitations, this study proposes a plan for conducting category mapping between different sources with various mediums while maintaining the existing category system of the medium as it is. Specifically, by re-classifying individual documents from the viewpoint of diverse sources and storing the result of such a classification as extra attributes, this study proposes a logical layer by which users can search for a specific document from multiple heterogeneous sources with different category names as if they belong to the same source. Besides, by collecting 6,000 articles of news from two Internet news portals, experiments were conducted to compare accuracy among sources, supervised learning and semi-supervised learning, and homogeneous and heterogeneous learning data. It is particularly interesting that in some categories, classifying accuracy of semi-supervised learning using heterogeneous learning data proved to be higher than that of supervised learning and semi-supervised learning, which used homogeneous learning data. This study has the following significances. First, it proposes a logical plan for establishing a system to integrate and manage all the heterogeneous mediums in different classifying systems while maintaining the existing physical classifying system as it is. This study's results particularly exhibit very different classifying accuracies in accordance with the heterogeneity of learning data; this is expected to spur further studies for enhancing the performance of the proposed methodology through the analysis of characteristics by category. In addition, with an increasing demand for search, collection, and analysis of documents from diverse mediums, the scope of the Internet search is not restricted to one medium. However, since each medium has a different categorical structure and name, it is actually very difficult to search for a specific category insofar as encompassing heterogeneous mediums. The proposed methodology is also significant for presenting a plan that enquires into all the documents regarding the standards of the relevant sites' categorical classification when the users select the desired site, while maintaining the existing site's characteristics and structure as it is. This study's proposed methodology needs to be further complemented in the following aspects. First, though only an indirect comparison and evaluation was made on the performance of this proposed methodology, future studies would need to conduct more direct tests on its accuracy. That is, after re-classifying documents of the object source on the basis of the categorical system of the existing source, the extent to which the classification was accurate needs to be verified through evaluation by actual users. In addition, the accuracy in classification needs to be increased by making the methodology more sophisticated. Furthermore, an understanding is required that the characteristics of some categories that showed a rather higher classifying accuracy of heterogeneous semi-supervised learning than that of supervised learning might assist in obtaining heterogeneous documents from diverse mediums and seeking plans that enhance the accuracy of document classification through its usage.

• Korean Journal of Korean Medical Institute of Dermatology and Aesthetics
• /
• v.1 no.1
• /
• pp.127-144
• /
• 2005

This study compared the activity of the aerial part of P. japonicum with its root in order to examine the possibility of the medicinal use of the aerial part, which has not been used as medicine, in substitute for the root that has traditionally been used as medicine. For this purpose, the author measured the proliferation of Human $CD4^-$ T cells, which are related to immunity, the differentiation of HL-60 cells, and the contents of IL-6, IgE and $TNF-{\alpha}$ and compared their anti-cancer effect on Hep3B and A549 cells. The results of this study are as follows: 1. As for Human $CD4^-$ T cells, $1.0\;g/{\ell}$ methanol extract from the aerial part promoted the proliferation of the cells 1.8 times higher while $1.0\;g/{\ell}$ methanol extract from the root did by 1.76 times higher compared to the control group. 2. As for HL-60 cells, methanol extract and water extract from the aerial part showed differentiation 1.14 times higher and 1.12 times higher respectively while methanol extract and water extract from the root did 1.14 times higher and 1.07 times higher compared to tile control group. 3. Cell density was highest on Day 4 of culture in all samples, Methanol extracts from the aerial part and the root showed activities of $7.9{\times}10^3\;cells/m{\ell}$ and $7.5{\times}10^3\;cells/m{\ell}$ respectively, and water extracts from the aerial part and the root did activities of $5.3{\times}10^3\;cells/m{\ell}$ and $6.1{\times}10^3\;cells/m{\ell}$. 4. The secretion of IL-6 was highest on Day 4 of culture. Methanol extracts from the aerial part and the root showed secretions of $6.7{\times}10^{-3}\;pg/cells/m{\ell}$ and $7.2{\times}10^{-3}\;pg/cells/m{\ell}$ respectively, and water extracts from the aerial part and the root did secretions of as high as $7.0{\times}10^{-3}\;pg/cells/m{\ell}$ and $6.0{\times}10^{-3}\;pg/cells/m{\ell}$. 5. As for the production of IgE, water extract from the root effectively inhibited the product at $1,000\;{\mu}g/m{\ell}$, methanol extract from the root at $10\;{\mu}g/m{\ell}$ and $100\;{\mu}g/m{\ell}$, water extract from the aerial at $1,000\;{\mu}g/m{\ell}$, and methanol extract from the aerial part at $1,000\;{\mu}g/m{\ell}$. 6. According to the result of measuring the content of $TNF-{\alpha}$, methanol extracts from the root and the aerial part showed inhibition effect at $10\;{\mu}g/m{\ell}$, $100\;{\mu}g/m{\ell}$ and $1,000\;{\mu}g/m{\ell}$. 7. As for liver cancer cell Hep3B, $1.0\;g/{\ell}$ methanol extracts from the root and the aerial part showed inhibition effects of 78% and 70% respectively, and $1.0\;g/{\ell}$ water extracts from the root and the aerial part did inhibition effects of 56% and 59%. 8. As for lung cancer cell A549, $1.0\;g/{\ell}$ methanol extracts from the root and the aerial part showed inhibition effects of 75% and 70% respectively, and $1.0\;g/{\ell}$ water extracts from the root and the aerial part did inhibition effects of 48% and 45%. The results of this study presented above show that the aerial part of P. japonicum has immunizing and anti-cancer effects as high as its root, which has commonly been used as medicine. There should be more in-depth research on the aerial part of P. japonicum in the future.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.699-720
• /
• 1995

This study was conducted to evaluate the effect of benzalkonium chloride solution as a wetting agent instead of water on dentin bonding with NTG-GMA/BPDM system (All-bond 2, Bisco.) and DSDM system (Aelitebond, Bisco.). Benzalkonium chloride solution is a chemical disinfectant widely used in medical and dental clinics for preoperative preparation of skin and mucosa due to its strong effect of cationic surface active detergent. Eighty freshly extracted bovine lower incisor were grinded labially to expose flat dentin surface, and then were acid-etched with 10 % phosphoric acid for 15 second, water-rinsed, and dried for 10 second with air syringe. The specimens were randomly divided into 8 groups of 10 teeth. The specimens of control group were remoistured with water and the specimens of experimental groups were remoistured with 0.1 %, 0.5 %, and 1.0 % benzalkonium chloride solution respectively. And then, the Aelitefil composite resin was bonded to the pretreated surface of the specimens by use of All-bond 2 dentin bonding system or Aelitebond dentin bonding system in equal number of the specimens. The bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured, the mode of failure was observed, the fractured dentin surface were examined under scanning electron microscopy, and FT-IR spectroscopy was taken for the purpose of investigating the changes of the dentin surface pretreated with benzal konium chloride solution followed by each primer of the dentin bonding systems. The results were as follows : In the group of bonding with NTG-GMA/BPDM dentin bonding agent(All-bond 2), higher tensile bond strength was only seen in the experimental group remoistured with 0.1 % benzal konium chloride solution than that in water-remoistured control group(p<0.05). In the group of bonding with DSDM dentin bonding agent (Aelitebond), no significant differences were seen between the control and each one of the experimental group(p<0.05). Higher tensile bond strength were seen in NTG-GMAIBPDM dentin bonding agent group than in DSDM dentin bonding agent group regardless of remoistur ization with benzal konium chloride solution. On the examination of failure mode, cohesive and mixed failure were predominantly seen in the group of bonding with NTG-GMAIBPDM dentin bonding agent, while adhesive failure was predominantly seen in the group of bonding with DSDM dentin bonding agent. On SEM examination of fractured surfaces, no differences of findings of primed dentin surface between the groups with and without remoisturization with benzal konium chloride solution. FT-IR spectroscopy taken from the control and the experimental group reve::.led that some higher absorbance derived from the primers binding to dentin surface was seen at the group pretreated with 0.1 % benzal konium chloride solution than at the control group of remoisturizing with water.