• The Korean Journal of Food And Nutrition
• /
• v.27 no.3
• /
• pp.339-347
• /
• 2014

This study investigated the classification of olive oils that are mainly distributed in Korea via imports. The fatty acid contents, degree of color, pigments, anti-oxidants, and sterol contents are analyzed on the different types of olive oil as follows: 10 kinds of extra virgin olive oil, 5 kinds of pure olive oil, and 5 kinds of refined olive-pomace oil. As a result of fatty acid analysis, the majority of oleic acid ($C_{18:1}$) and palmitic acid ($C_{16:0}$), and minority of linoleic acid ($C_{18:2}$) and stearic acid ($C_{18:0}$) were detected without any significant differences between the grades of olive oils. The UV spectrum is related to the ${\Delta}K$, and it is a part of the analysis factor for the purity and degree of degradation of the oil. Extra virgin olive oil had ${\Delta}K$ of almost 0, pure olive oil had 0.07~0.12, and refined olive-pomace oil had 0.1~0.13. These differed from extra virgin oil, and the pure or pomace oil ${\Delta}K$ had a confirmed distinct difference. The color degrees of chlorophyll with a low $L^*$ value and $(-)a^*$ (green) and carotenoid with $(+)b^*$ (yellow) were confirmed to have correlation between extra virgin and other olive oils. To compare chlorophyll and carotenoid as natural pigment in olive oils, 417 nm and the ratio of the absorbance at 480 nm (417/480) was calculated at 1.62 of extra virgin, 1.85 of pure olive oil, and 3.32 of refined olive-pomace oil. Therefore, it will be possible to distinguish when the extra virgin or pure olive oil are mixed with olive-pomace oil. The total amount of tocopherol, an anti-oxidant, were 19.06 in extra virgin, 10.91 in pure olive oil, and 27.88 in refined olive-pomace oil. The high content of tocopherol in pomace oil caused recovery of solvent extraction from olive pulp. Thus, extra virgin oil and pure olive oil were distinguished by olive-pomace oil. Polyphenol compounds in extra virgin olive oil measured high only in ferulic acid with 0.543 mg/kg, caffeic acid with 0.393 mg/kg, and other vanillic acid, vanillin, and p-coumaric acid had similar amount of 0.3 mg/kg. All grade of olive oils had the highest ${\beta}$-sitosterol content. Af (Authenticity factor) value were estimated with campesterol and stigmasterol content ratio (%). Af value was 19.2 in extra virgin olive oil, 17.1 in pure olive oil, 16.9 in refined olive-pomace oil, which were distinctive from sunflower oil with 3.7, corn oil with 2.4, and soybean oil with 2.0. It can provide important indicator of olive oil adulteration with other cheap vegetable oils. The results of this study can be used as a database for the classification of olive oil grade and distinguishing between the different types of oils.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.450-455
• /
• 2011

[ $Al_2TiO_5$ ]has a high refractive index and good solubility of the chromophore in the $Al_2TiO_5$ lattice, which allows this structure to be a good candidate for the development of new ceramic pigments. However, pure $Al_2TiO_5$ is well known to decompose on firing at $900{\sim}1100^{\circ}C$. However, this process can be inhibited by the incorporation of certain metal cations into its crystalline lattice. In this study, the synthesis of gray ceramic pigment was performed by doping cobalt on the $Al_2TiO_5$ crystal structure. The $Al_2TiO_5$ was synthesized using $Al_2O_3$ and $TiO_2$, and doped with $Co_3O_4$ as a chromophore material. In order to prevent the thermal decomposition during the cooling procedure, MgO was added to samples by 0.05 mole, 0.1 mole, and 0.15 mole as a stabilizer. The samples were fired at $1500^{\circ}C$ for 2 hours and cooled naturally. The crystal structure, solubility limit, and color of the synthesized pigment were analyzed using XRD, Raman spectroscopy, UV, and UV-vis. $Al_2O_3$ was available for the formation of $CoAl_2O_4$, which should also be considered in order to explain the small amount of this phase detected in the sample with the higher $Co^{2+}$ content (${\geq}$ 0.03 mole). It was found that the solubility limit of $Co^{2+}$ in the $Al_2TiO_5$ crystal was 0.02 mole% through an analysis of Raman spectroscopy. Through the addition of a pigment with 0.02 mole% of $Co^{2+}$ to lime-barium glaze, stabilized gray color pigments with 66.54, -2.35, and 4.68 as CIE-$L^*a^*b^*$ were synthesized.

• ALGAE
• /
• v.37 no.2
• /
• pp.163-174
• /
• 2022

Light-emitting-diodes (LEDs) are a lighting source useful for the precise evaluation of light quality effect on biological systems. Despite the importance of light spectra on the regeneration of land plant protoplasts ("naked cells"), this factor has not been tested yet on protoplasts from multicellular algae. This study reports on the effects of pure primary colors (red, blue, and green), dichromatic (red plus blue, RB, 1 : 2) and white LEDs on protoplast regeneration from male and female Undaria pinnatifida gametophytes. We also evaluated the effect of different light spectra on pigment composition (chlorophyll a, chlorophyll c, and fucoxanthine), and the light intensities under the best condition on the regeneration process. In the early stages, blue or RB LEDs increased the percentage of dividing female protoplasts, whereas red, blue, and RB LEDs enhanced that of dividing male protoplasts. In the later stages, RB LEDs showed a positive effect only on the percentage of multiple rhizoid-like protrusions (male gametophyte). They also increased the final area of both regenerated gametophytes. The LEDs did not affect pigment composition in female gametophytes. In male gametophytes, in contrast, they reduced chlorophyll c, while blue, RB, and green LEDs decreased fucoxanthin. Under RB LEDs, the optimal light intensity was 80 µmol photons m^-2 s^-1 for female gametophytes and 40 to 60 µmol photons m^-2 s^-1 for male gametophytes. Our results suggest that dichromatic LED illumination (red-blue) improves regeneration of U. pinnatifida gametophyte-isolated protoplasts. Thus, dichromatic LEDs might a suitable light source for enhancing protoplast regeneration in brown seaweeds.

• Korean Journal of Materials Research
• /
• v.32 no.8
• /
• pp.354-360
• /
• 2022

In this study, an Co/Fe coated porcelain using a cobalt and ferrous sulfate was sintered at 1,250 ℃. The specimens were investigated by HR-XRD, FE-SEM (EDS), Dilatometer, and UV-vis spectrophotometer. The surface of the porcelain was uniformly fused with the pigment, and white ware and celadon body specimens were densely fused to a certain thickness from the surface. Other new compounds were produced by the chemical reaction of cobalt/ferrous sulfate with the porcelain body during the sintering process. These compounds were identified as cobalt ferrite spinel phases for white ware and white mixed ware, and an andradite phase for the celadon body, and the amorphous phase, respectively. As for the color of the specimens coated with cobalt and ferrous mixed pigments, it was found that the L^* value was greatly affected by the white ware, and the a^* and b^* values were significantly changed in the celadon body. The L^* values of the specimens fired with pure white ware, celadon body, and white mix ware were 72.1, 60.92, 82.34, respectively. The C7F3 pigment coated porcelain fired at 1,250 ℃ had L^* values of 39.91, 50.17, and 40.53 for the white ware, celadon body, and white mixed ware, respectively; with a^* values of -1.07, -2.04, and -0.19, and at b^* values of 0.46 and 6.01, it was found to be 4.03. As a new cobalt ferrite spinel phase was formed, it seemed to have had a great influence on the color change of the ceramic surface.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.82-90
• /
• 1999

The buddhistic painting of Song-Kwang temple in Seungjoo-gun, Chonnam, Korea is not known in chronicle, but it could be estimated to works in the early 19th century through it's remaining records and qualities of materials. And it was analysed the qualities of materials consisting of pigment layer, silken-ground layer and support layer in order to preserve buddhistic painting, made back-adherent paper of the support layer proper to it, tested its compatibility, and then concluded as follows. 1. The section structures of buddhistic painting is consisted of the pigment layer, silken-ground layer of silk and the support layer of Korean hand made paper, it could be recognized that buddhistic painting in 19th century was basically composed of the pigment layer, the silken-ground layer and the support layer. Moreover the pigment layer and the silken-ground layer got adhered with glue, and sheets of support layers got back adhered with paste. 2. The support layer of buddhistic painting consisted of 5 layers and two kinds of paper were used for them. The first and second layers were composed of Korean hand made paper made of pure paper mulberry bast fibers, and the rest of them of paper that paper mulberry bast fibers were mixed into recycled hemp fibers. Though it is difficult to assert without the security of more data, finding out the then situation through the qualities of materials, it was presumed that the society in 19th century was suffered from economical difficulties and the operation of the paper industry of temples was rather difficult and so low-qualitative recycled hemp fibers might used for back-adherent paper. 3. Considering tension between silken-ground layers and support layers of this materials, newly made back-adherent paper was used for repair, and then I could conform that it was proper to back-adherent paper for repair.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.3
• /
• pp.287-296
• /
• 2013

To decompose carbon dioxide, which is a representative greenhouse gas, a plasma torch was designed and manufactured. To examine the characteristics of carbon dioxide decomposition via plasma discharge, a case wherein pure carbon dioxide was supplied and a case wherein methane and/or $TiCl_4$ were injected as additives were investigated and compared. The carbon dioxide and methane conversion rate, energy decomposition efficiency, produced gas concentration, carbon monoxide and hydrogen selectivity, carbon-black and $TiO_2$ were also investigated. The maximum carbon dioxide conversion rate was 28.9% when pure carbon dioxide was supplied; 44.6% when $TiCl_4$ was injected as am additive; and 100% percent when methane was injected as an additive. Therefore, this could be explained that the methane injection showed the highest carbon dioxide decomposition. Furthermore, the carbon-black and $TiO_2$ were compared with each commercial materials through XRD and SEM. It was found that the carbon-black that was produced in this study is similar for commercial materials. It was found that the $TiO_2$ that was produced in this study is suitable for photocatalyst and pigment because it has mixed anataze and rutile.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.403-416
• /
• 2016

Mineral composition and content of 22 Korean Dancheong pigment products were obtained by Rietveld quantitative analysis. Jubosa, Hwang, Seokrok, Seokcheong and Hobun consist of pure cinnabar, orpiment, malachite, azurite and calcite (or aragonite), respectively. Whereas Seokganju, Hwangto, Noerok, Lapis lazuli, Baekto and Cockie hobun mainly consist of hematite, goethite, celadonite, lazurite, kaolin mineral and portlandite, respectively. And they all consist of soil minerals (quartz, feldspar, sericite and vermiculite) and filler minerals in the industry field (calcite, gypsum and anhydrite) at a different content. Quantitative XRD proved more useful method to determined exact mineral composition and content than chemical or microscopical data. If this method utilize for specification of natural pigment product, it is considered to be applicable in restoration technology and conservation science field.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.2
• /
• pp.88-92
• /
• 2005

In order to make pure dyestuff extract from polygonum tinctoria, we tried to traditionally-using cockle shell which the extracted water should be filtered in indigo for 8 hours and at the $40^{\circ}C$, and 4.0 pH. The 1.631g of powder dye could be produced when the 10.0 ml of aqueous ammonia was added into the solution, which had been filtered for 8 hours with the 300 g of indigo plant and the 2.51 of water. The main components of two maded -dye which has traditionally made of this and has purely made of that compared by TLC, HPLC, LC/MC techniques. Finally, the antibacterial activities and deodorization ratio of silk fabrics with natural indigo were carried out, too.

• Microbiology and Biotechnology Letters
• /
• v.21 no.5
• /
• pp.494-503
• /
• 1993

A fungal strain was isolated as a pullulan-producer from plant leaves and identified as Aureobasidium pullulan GM21. With A. pullulans GM21, culture conditions were optimized for the pullulan production and the changes of the molecular weight of pullulan produced were investigated according to the culture conditions we obtained maximum conversion yield of pullulan about 58-60%(40.8-42.0g/l) from 7% sucrose at 25C, initial pH 7.5 by the batch cultivations either in Erlenmeyer flask or in jar fermentor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.459-465
• /
• 1995

The ether extract of Salviae miltiorrhizae Radix(SMR) was fractioned to give five subfractions, so that two subfractions of them were recrystallized to yield each pure diterpene quinone pigment. On the basis of spectral evidence, these two compounds were identified as tanshinone II and crytotanshinone. Cryptotanshinone exhibited both of a potent platelet anti-aggregating activity in vitro and a potent antimicrobial activity. GC-MS analysis of the other extract showed that tanshinone II was contained in the largest proportion of all the diterpene quinones. In addition, GC-MS analysis gave other valuable analytical informations.