• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.51-54
• /
• 2007

The purpose of this paper is the development of measurement algorithm for green-sheet based on the digital image processing technique. The Low Temperature Cofired Ceramic (LTCC) technology can be defined as a way to produce multilayer circuits with the help of single tapes, which are used to apply conductive, dielectric and / or resistive pastes on. These single green-sheets have to be laminated together and fired in one step all. Main functionality of the green-sheet film measurement algorithm is to measure the position and size of the punching hole in each single layer. The line scan camera coupled with motorized X-Y stage is used for developing the algorithm. In order to measure the entire film area using several scanning steps, the overlapping method is used. In the process of development of the algorithm based on the image processing and analysis, strong background technology and know-how have been accumulated.

• 한국수정란이식학회지
• /
• 제20권2호
• /
• pp.163-168
• /
• 2005

혈통이 등록된 우수한 한우 공란우로부터 회수한 수정란을 간편한 방법으로 성 판별하여 우수한 암송아지를 생산하고자 실시한 결과는 다음과 같다. 회수한 수정란을 punching 또는 bisection 방법으로 biopsy하여 Loop-mediated isothermal amplification법으로 성 판별하였으며, 암컷으로 예측되는 성 판별 수정란을 6두의 수란우에 이식하여 2두가 임신되었고, 수정란 이식 후 278일과 285일에 정상적인 암컷 송아지를 각각 분만하였다. 분만된 송아지 바란이와 보란이의 생시체중은 각각 18kg 및 25kg이었으며, 90일령 보정체중은 각각 61.1kg 및 88.8kg으로 일당증체량은 0.48kg 및 0.71kg이었다.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3745-3765
• /
• 2022

The concrete structures related to nuclear safety are threatened by accidental impact loadings, mainly including the low-velocity drop-weight impact (e.g., spent fuel cask and assembly, etc. with the velocity less than 20 m/s) and high-speed projectile impact (e.g., steel pipe, valve, turbine bucket, etc. with the velocity higher than 20 m/s), while the existing studies are still limited in the impact resistant design of nuclear power plant (NPP), especially the primary RC slab. This paper aims to propose the numerical simulation and theoretical approaches to assist the impact-resistant design of RC slab in NPP. Firstly, the continuous surface cap (CSC) model parameters for concrete with the compressive strength of 20-70 MPa are fully calibrated and verified, and the refined numerical simulation approach is proposed. Secondly, the two-degree freedom (TDOF) model with considering the mutual effect of flexural and shear resistance of RC slab are developed. Furthermore, based on the low-velocity drop hammer tests and high-speed soft/hard projectile impact tests on RC slabs, the adopted numerical simulation and TDOF model approaches are fully validated by the flexural and punching shear damage, deflection, and impact force time-histories of RC slabs. Finally, as for the two low-velocity impact scenarios, the design procedure of RC slab based on TDOF model is validated and recommended. Meanwhile, as for the four actual high-speed impact scenarios, the impact-resistant design specification in Chinese code NB/T 20012-2019 is evaluated, the over conservation of which is found, and the proposed numerical approach is recommended. The present work could beneficially guide the impact-resistant design and safety assessment of NPPs against the accidental impact loadings.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.439-442
• /
• 1989

$CO_2$ lasers are used in the various industrial fields since the development of $CO_2$ laser in 1964 It is because $CO_2$ laser is more efficient, more powerful than other lasers and $CO_2$ laser light of wavelength $10.6{\mu}m$ interacts with materials well. Thus $CO_2$ laser is used for industrial application such as cutting, punching, welding, surface treatment of metal and nonmetalic materials, isotope separation, etc. Already other research institutes including some universities have recognized the advantages and importance of the $CO_2$ laser, and studied it. However, its technology is in elementary state yet Therefore,we started this study to develop present $CO_2$ laser technology more highly and to fit it. The main purposes of this study are to acquire various technologies such as high voltage, high pressure glow discharge, vaccum and optical cavity design.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.17-22
• /
• 2020

As devices such as smartphones, tablet PC, and wearable devices have been miniaturized, the connectors that go into the devices are also designed to be very small. The connector combines the plug and the receptacle to transfer electricity. As devices are miniaturized, the contact shape is formed by partially thinning the thickness of the raw material of the terminal in order to lower the coupling height of the plug and receptacle. The product used in this study is a receptacle terminal used for 0.4mm pitch board to board connector among fine pitch connectors. When the material thickness is reduced by forging the receptacle terminal, the width change of the pin is checked. To reduce the thickness of the material by forging, pre-notching is applied in the first step, forging in the second step, and notching in the third step. After forming the width dimension of the pin to 0.28 mm in the pre-notching process, in the forging process, the material thickness 0.08 mm and 0.02 mm (25%) were forged and the thickness was changed to 0.06 mm and the width change amount of the pin was measured. The facility produced 10,000 pieces at 400 SPM using a Yamada Dobby (MXM-40L) press, and thirty pins were measured and the average value was shown. After forging by using C5210-H (HP) and NKT322-EH, which are frequently used in connectors, analyze the amount of change in each material. The effect of punching oil on forging is investigated by appling FM-200M, which is highly viscous, and FL-212, fast drying oil. This study aims to minimize mold modification by predicting the amount of material change after forging.

• 소성∙가공
• /
• 제19권6호
• /
• pp.337-343
• /
• 2010

Current need of weight reduction in automotive part increases the application for high strength steel (HSS). The various types of high strength steels have been used to produce chassis part, control arms and trailing arms for weight reduction and increasing of fatigue durability such as dual phase steel (DP) and ferrite bainite steel (FB). But, DP and FB steels have proven to show inferiority in durability as well as press formability. Edge cracking occurred often in flange forming and hole expansion processes is the major failure encountered. This paper discussed the behavior of edge stretchability of high strength steel of DP and FB steels. Experimental works have been conducted to study the effect of punch clearance and burr direction on hole expansion ratio (HER). Also finite element simulation (FEM) has been preformed to clarify the mechanism of flange crack and support the experimental results on HER of DP and FB steels. It was simulated the whole process of blanking process following by hole expansion process and ductile fracture criterion named the modified Cockcroft-Latham model which was used to capture the fracture initiation. From the hole expansion tests and FEM simulation studies it was concluded that ferrite bainite steel showed better stretch-flangeability than dual phase steel. It was attributed to the lower work hardening rate of ferrite bainite steel than dual phase steel at the sheared edge.

• 한국버섯학회지
• /
• 제6권3_4호
• /
• pp.131-137
• /
• 2008

표고버섯(J NM3022) 의 톱밥재배시 적절한 배지크기 및 배지조성을 구명하기 위하여 '05년부터 2년동안 시험결과 다음과 같은 결과를 얻었다. 표고버섯 톱밥재배를 위하여 배지길이와 직경이 다른 12가지 크기의 배지를 이용하여 배양기간, 배양완성률을 시험한 결과 가장 적절한 배지크기는 길이 25 cm ${\times}$ 직경 14cm, 무게 2.5 kg 배지였다. 소나무톱밥의 포화수분함량은 495 $m{\ell}/100g$으로 침 나무동밥 251 $m{\ell}/100g$보다 약 2배 많았다. 참나무톱밥 100% 등 10조합의 배지조성 중 균사생장속도와 균사일도가 가장 좋았던 배지조성은 참나무톱밥 80%+밀기울 20%와 참나무톱밥 80%+미강 20% 처리였으며, 가장 적합한 배지수분함량은 55%였다. 배양기간을 단축하기 위하여 배지중앙에 유공관을 설치하였을 때 무처리에 비하여 길이 20 cm 배지는 11일, 30 cm 배지는 32일을 단축할 수 있었다. 배지표면 갈변화에 가장 좋았던 처리는 $10^{\circ}C$ 정도의 변온과 봉지천공으로 갈변 소요기간은 35일로 동일조건의 무천공처리에 비하여 54일을 단축시킬 수 있었다.