• 한국환경과학회지
• /
• 제13권7호
• /
• pp.681-687
• /
• 2004

This study was focused on the manufacturing method of a dewatering aid, which would reduce the water content of the sludge cake by enhancing the dewaterability of sewage sludge. The pretreatment technology for sludge by using radiation and among diverse discarded resources were starfish selected as the material to manufacture the dewatering aid. Starfish went through the process of washing, drying, and pulverizing. The starfish powder made in this process was applied to the digested sludge generated at the sewage treatment plant of D City, and its effects were investigated. The starfish powder that was 300 ${\mu}m$ in particle size was added to the irradiated digested sludge. After the application of the condensation process, the sludge with the starfish powder added was dewatered using the belt press and centrifuge, which were the traditional pressure dewatering devices. As the result, it reduced the water content of the sludge 20% higher than the dewatered cake with no dewatering aid added and irradiation. When the powder was added, it contributed to less use of the coagulant added. The more irradiation dose, the lower water content did the dewatered cake have and the more coagulant was needed for condensation, which seems to be a disadvantage that can be compensated for by the starfish dewatering aid. A small-scaled treatment of the study to a radiation technology and dewatering aid using a discarded resource confirmed the potential of dewaterability. Based on the results saying that the dewatering aid and radiation technology can improve dewatering effects using the traditional dewatering devices, this pretreatment technology will be expected to be applied to sewage treatment plants.

• Applied Biological Chemistry
• /
• 제31권1호
• /
• pp.86-91
• /
• 1988

경북(慶北) 월성산(月城産) Zeolite광석으로 조제(調製)한 $1{\sim}0.5,\;0,5{\sim}0.25,\;0.25{\sim}0.1$ 및 <0. 1mm의 4종류의 Zeolite 획분(劃分)의 비표면적(比表面積)이 수증기(水蒸氣) 및 EGME흡착법(吸着法)에 의(依)해 측정(測定)되었다. 수증기(水蒸氣) 및 EGME에 의(依)한 Zeolite의 비표면적(比表面積)은 각각 평균(平均) 106 및 $161m^2/g$으로 측정물질(測定物質)에 따라 약간의 차이(差異)가 있었으나 두방법(方法) 공히 입경(粒徑)의 대소(大小)에 따른 비표면적(比表面積)의 차이(差異)는 거의 없었다. $H_2O$ 분자경(分子徑)과 Mordenite공경(孔徑)을 근거(根據)하여 비교검토(比較檢討)한 결과측정(結果測定)된 비표면적(比表面積)은 실제표면적(實際表面積)의 일부분(一部分)으로 추정(推定)되었다. 따라서 Zeolite의 표면적(表面積)을 정확(正確)히 측정(測定)하기 위해서는 새로운 측정법(測定法)의 개발(開發) 필요성(必要性)이 인정(認定)된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.549-552
• /
• 2008

시멘트는 CaO, SiO2, Al2O3, Fe2O3, 등을 주요 성분으로 이루어져 있으며, 시멘트는 천연의 원료인 석회석, 규석, 점토, 철질 원료를 분쇄 및 혼합하여 고온의 킬른에서 소성 공정을 거쳐 제조된다.산화분위기의 소성과정을 거치면서 원료에 포함되어진 크롬 중 일부는 6가 크롬으로 용출된다. 또한 클링커의 원료 중 일부는 슬래그, 슬러지 등으로 대체되어 사용되고 있어 소성 공정중 원료에 포함되어져 있는 크롬은 6가 크롬으로 전환되어져 최종의 제품인 시멘트에도 6가 크롬은 포함되어진다. 원료에 함유된 중금속중 수용성 6가 크롬은 접촉시 알레르기를 발생시키는 원인으로 보고되고있다. 따라서 시멘트 중 6가 크롬의 저감 방법으로는 시멘트 공장에서 사용되어지는 대체원료의 사용량을 줄이고, 크롬 함량이 낮은 원료를 사용해야 하며, 클링커가 제조되는 분위기를 제어하여 크롬의 전환율을 낮추는 방법이 있을 수 있다. 따라서 클링커 원료의 종류 및 함량을 변화시켜 제조된 클링커의 6가 크롬의 용출특성을 검토하였으며, 대체원료의 사용이 증가함에 따라 6가 크롬의 용출량은 증가하였으며, 클링커의 소성온도가 낮아짐에 따라 6가 크롬의 용출도 증가함을 확인할 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.458-465
• /
• 2017

본 연구에서는 굴 패각을 원료(골재)로 활용하기 위한 물리적인 가공방법에 관한 것을 실험을 통해 검토하고자 하였다. 실험결과 굴 패각의 형상에 의해 분쇄된 굴 패각의 적정 입도는 10mm 보다 작아야 될 것으로 판단된다. 또한 가동시간과 회수율, 각 입도별 잔류율과 다양한 입도분포를 고려할 때 굴 패각의 분쇄에는 커터 밀이 적합한 것으로 나타났다. 커터 밀의 경우, 8mm의 내부 스크린을 적용할 때, 회수율은 97.3% 12mm를 적용할 때, 98.2%, 20mm일 때, 98.9%로 나타나 스크린 사이즈가 커짐에 따라 회수율은 다소 증가되는 것으로 나타났다. 커터 밀의 내부 스크린과 인버터의 속도 차이에 의한 실험결과 스크린의 크기가 작을수록, 인버터의 속도가 빠를수록 조립률은 낮아지는 것으로 나타났으며, 동일한 스크린에서 인버터 속도의 상승은 더욱 낮은 입도범위의 재료 회수가 가능한 것으로 나타났다.

• Carbon letters
• /
• 제8권4호
• /
• pp.326-334
• /
• 2007

In this study, graphite composites were fabricated by warm press molding method to realize commercialization of PEM fuel cells. Graphite composites have been considered as alternative economic materials for bipolar plate of PEM fuel cells. Graphite powder that enables to provide electrical conductivity was selected as the main substance. The graphite powder was mixed with phenolic resin and the mixture was pressed using a warm press method. First of all, the graphite powder was pulverized with a ball mill for the dense packing of composite. As the ball milling time increases, the average size of particles decreases and the size distribution becomes narrow. This allows for improvement of the uniformity of graphite composite. However, the surface electrical resistivity of graphite composite increases as the ball milling time increases. It is due to that graphite particles with amorphous phase are generated on the surface due to the friction and collision of particles during pulverizing. We found that the contact electrical resistivity of graphite particles increases as the particle size decreases. The contact electrical resistivity of graphite powders was reduced due to high molding pressure by warm press molding. This leads to improvement of the mechanical properties of graphite composite. Hydrogen gas impermeability was measured with the graphite composite, showing a possibility of the application for bipolar plate in fuel cell. And, I-V curves of the graphite composite bipolar plate exhibit a similar performance to the graphite bipolar plate.

• 한국식품영양과학회지
• /
• 제32권3호
• /
• pp.363-369
• /
• 2003

홍삼 분쇄의 신 가공 기술로서 비충격 분쇄방식인 cell cracker의 공장 적용 가능성을 제시하고 홍삼분말의 품질고급화에 기초자료로 활용하고자 기존의 충격 분쇄방식 인 hammer mill과 cell cracker에 의한 분쇄방식으로 홍삼분말을 제조한 후 이화학적 특성을 조사한 결과, 수분함량의 경우 hammer mill로 분쇄한 홍삼분말은 3.16%로 cell cracker로 분쇄한 홍삼분말 6.30%보다 현저하게 낮게 나타나 현행 식품 공전에서는 홍삼분말의 수분함량을 8%이하로 규정하고 있어 cell cracker에 의한 분쇄가 수율제고라는 측면에서는 보다 경제적인 분쇄방법으로 판단된다. 그 외 cell cracker로 분쇄한 경우 조단백질, 총당, 산성다당체가 약간 높게 나타났으나 큰차는 없었으며, 조지방, 환원당, 조섬유, 회분함량은 hammer mill로 분쇄했을시 약간 높게 나타났으나 큰 차이는 없었다. 총 지방산 함량을 비교해볼 때 hammer mill로 분쇄한 시료는 87.90%이고 cell cracker로 분쇄한 시료는 87.50%로 큰 차이를 보이지 않았다. 총 아미노산 함량을 조사한 결과 hammer mill로 분쇄한 시료는 670.96mg%이고 cell cracker로 분쇄한 시료는 676.50mg%이었으며, 필수아미노산의 경우도 각각 212.25 mg%와 206.25 mg%로 조사되어 거의 차이를 나타내지 않았다. Total ginsenosides 경우 hammer mill로 분쇄한 시료는 1.263%였으나 cell cracker로 분쇄한 시료는 1.311%로 약간 높게 나타났다. 그 외에 유리당 및 무기성분 등에서도 큰 차이를 보이지 않았다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.71-74
• /
• 2007

This study investigates the fundamental properties of high strength concrete made with various blame values of cement, manufactured by the particle screening method in a pulverizing process. Test showed that concrete using lower blame of cement, such as large particle (L) and both ordinary and large particle (OL), increased the fluidity of fresh concrete. As tine progressive, it was noticeable that the specimens using ordinary cement (OPC) gradually decreased the fluidity, but the other specimens showed the sudden decline until 30 minutes, which is followed by a gradual decrease after 60 minutes. For the setting time, higher blaine of cement accelerated the initial and final setting time, especially concrete using minute size of cement (M) was 10 hours faster than OPC. Compressive strength of L exhibited similar value at 1 days as to that of strength in OPC at 3 days. Importantly, the specimens using M also revealed the similar strength value, regardless of curing temperature between $-5^{\circ}C$ and $20^{\circ}C$, which means that using this minute particle of cement in concrete can secure the strength development even in the lower temperature circumstance. Therefore it is clear that using OPC+M simultaneously at cold weather concreting can resist the early frost and develop the early strength of concrete.

• 공업화학
• /
• 제23권2호
• /
• pp.195-203
• /
• 2012

폐 LCD유리의 재활용 방안은 평판 디스플레이용 폐 LCD판넬의 전체 재활용 공정의 확립을 위한 중심요건이다. 본 연구는 폐 LCD유리를 보온단열재, 흡음차음제, 토목용 경량골재 또는 수처리용 담체 등의 원료로 재활용하기 위한 발포공정의 기초공정으로서 폐 LCD유리의 분쇄특성, 적절한 탄소발포제의 선정, 유가물 회수를 위한 산침출 후 잔유된 유리질의 물성 및 이들의 발포화의 문제점을 조사하였다. 폐 LCD유리의 분쇄공정을 통해 발포용 원료로 사용가능한 미분화가 가능하였으며, 고융점을 갖는 LCD 유리의 발포화를 위해서는 결정성 천연흑연이 적절하였으며, 산 침출 후 잔사인 슬러지 상태의 폐유리성분도 발포체의 원료로 재활용될 수 있음을 확인하였다.

• 한국식품위생안전성학회지
• /
• 제3권4호
• /
• pp.217-223
• /
• 1988

For the Effective utilization of the fish resources in coastal regions, investigations on preparation of powdered dried arkshell instant soup., quality stability of the products during storage and utilization as a food material were carried out with arkshell, Anadara broughtonii. Three kinds of powdered instant soup were prespared as 0% table salt(A), 5% table salt (B), 15% table salt(C) and packed with vacuum in laminated film bag. (polyester/nylon: 85${mu}ell$/15${mu}ell$, 18$\times$27cm) Their processing conditions and quality stability during storage at room temperature for 90 days were examined. Powdered instant soup was made by washing raw arkshell to remove visceral, clay, sand and blood, hot air drying(60$\pm$1$^{\circ}C$, 20 hrs) after draining and pulverizing dried arkshell to 35 mesh. Powdered instant soup was made by adding 2% sugar 0% table salt (5% and 15% table salt), 10.5% monosodium glutamate, 0.3% black pepper and 0.3% garlic powder to the pulverized dried arkshell. The condition of moisture and water activity of the products were 5.9-6.9% and 0.42-0.43, respectively. The moisture content s , water activity and pH of the products were showed little change and volatile basic nitrogen of them increased slightly during storage. Thiobarbituric acid value increased up to 60 days of storage and then decreased slightly. In solubility, powdered instant soup were showed no remarkable difference comparing with goods on the market. The color value of th products were showed little change during storage, In sensory evaluation, product B were scored slightly higher, in most cased, in flaver, color. taste and overall acceptability comparing with product A or product C during storage. Judiging form the sensory evaluation, powdered instant soup of 5% table salt (B) were the most desirable, and the quality of the products was stable for 90 days at 20$\pm$3$^{\circ}C$.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.191-198
• /
• 1999

The purpose of this study is investigating characteristics of the concrete containing Fly-ash according to different 4 mix design, that is, the first mix design is partial replace Fly-ash of cement, second is partial replace Fly-ash of cement and fine aggregate, third is partial replace Fly-ash of fine aggregate, fourth partial replacement of fine and coarse aggregate. For this purpose, selected test variables were water-binder ratio with two levels of 45%, 50%, and Fly-ash contents with four levels 0%, 10%, 20%, 30%, As the result of this study are as follow. 1) The result of mix design of a partial replacement of cement, the slump-flow value was appeared a promotive effect of viscosity. But in case of the over with Fly-ash 10% and the other mix design was not changed slump value. 2) The unit weight of the mixing rate with Fly-ash 0% was $1.875{\sim}1.884t/m^3$, the other mix design 10% over with Fly-ash was $1.846{\sim}1.615t/m^3$, the difference was appeared less about 15% than that. 3) In design, partial replace Fly-ash of fine aggregate, this compressive strength was appeared that the concrete age after 7 days was higher than in partial replacement of cement, therefore, the default of a concrete with Fly-ash, that is the earlier compressive strength was to lessen, was improved. 4) The thermal conductivity of the all mix design was $0.447{\sim}1.144kcal/mh^{\circ}C$, this value was as good as a lightweight aggregate concrete.