• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.734-737
• /
• 2006

A series of manganite-based superlattices composed of half-metallic $La_{2/3}Sr_{1/3}MnO_3/LaMnO_3$ and insulating LaMnO$_3$ stacking layers were fabricated by employing pulsed laser deposition method. The dc resistivity increased drastically by simply reducing the stacking periodicity. The resistivity enhancement was accompanied by a gradual decrease in the temperature (T$_c$) of the Metal-to-Insulator Transition (MIT). This observation was interpreted as a small decrease in the effective metallic fraction near the percolation threshold. For the stacking periodicity less than a certain critical value, there appeared another transition to an insulating state at temperatures far below T$_c$. This low-temperature transition seems to be closely related to the AF-type (C-type) orbital ordering in newly formed insulating domains.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.8
• /
• pp.663-669
• /
• 1994

Decay kinetics of Ga(5s), Ga(5p) and Ga(4d) atoms in Ar were studied by laser induced fluorescence technique. Theground state gallium atoms in the gas phase were generated by pulsed dc discharge of trimethyl gallium and argon mixtures. Both pulsed discharge and YAG-DYE laser system were controlled by a dual channel pulse generator and the delay time between the end of discharge and laser pulses was set 3.0-6.0 ms. The Ga(5s) and Ga(4d) atoms were generated by single photon excitation from the ground state Ga atoms and radiative lifetimes as well as the total quenching rate constants in Ar were obtained from the pressure dependence of the fluorescence decay rates. The Ga(5p) atoms were populated by a two-photon excitation method and the cascade fluorescence from Ga(5s) atoms were analyzed to extract quenching rate constant of Ga(5p) atoms by Ar in addition to radiative lifetimes of Ga(5p) state. The magnitudes of the quenching rate constants by Ar for the low-lying excited states of Ga atoms are 1.6-3$ {\times}10^{-11}cm^3$ molecul$e^{-1}s^{-1}$, which are much larger than those for alkali, alkaline earth and Group 12 metals. Based on the measured rate constants, kinetic simulations were done to assign state-to-state rate constants.

• IMMUNE NETWORK
• /
• v.21 no.6
• /
• pp.44.1-44.15
• /
• 2021

Tumor peptides associated with MHC class I molecules or their synthetic variants have attracted great attention for their potential use as vaccines to induce tumor-specific CTLs. However, the outcome of clinical trials of peptide-based tumor vaccines has been disappointing. There are various reasons for this lack of success, such as difficulties in delivering the peptides specifically to professional Ag-presenting cells, short peptide half-life in vivo, and limited peptide immunogenicity. We report here a novel peptide vaccination strategy that efficiently induces peptide-specific CTLs. Nanoparticles (NPs) were fabricated from a biodegradable polymer, poly(D,L-lactic-co-glycolic acid), attached to H-2K^b molecules, and then the natural peptide epitopes associated with the H-2K^b molecules were exchanged with a model tumor peptide, SIINFEKL (OVA_257-268). These NPs were efficiently phagocytosed by immature dendritic cells (DCs), inducing DC maturation and activation. In addition, the DCs that phagocytosed SIINFEKL-pulsed NPs potently activated SIINFEKL-H2K^b complex-specific CD8⁺ T cells via cross-presentation of SIINFEKL. In vivo studies showed that intravenous administration of SIINFEKL-pulsed NPs effectively generated SIINFEKL-specific CD8⁺ T cells in both normal and tumor-bearing mice. Furthermore, intravenous administration of SIINFEKL-pulsed NPs into EG7.OVA tumor-bearing mice almost completely inhibited the tumor growth. These results demonstrate that vaccination with polymeric NPs coated with tumor peptide-MHC-I complexes is a novel strategy for efficient induction of tumor-specific CTLs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.151-151
• /
• 2012

A new plasma process, i.e., the combination of PIII&D and HIPIMS, was developed to implant non-gaseous ions into materials surface. HIPIMS is a special mode of operation of pulsed-DC magnetron sputtering, in which high pulsed DC power exceeding ~1 kW/$cm^2$ of its peak power density is applied to the magnetron sputtering target while the average power density remains manageable to the cooling capacity of the equipment by using a very small duty ratio of operation. Due to the high peak power density applied to the sputtering target, a large fraction of sputtered atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed plasma of sputtered target material by HIPIMS operation, the implantation of non-gaseous ions can be successfully accomplished. The new process has great advantage that thin film deposition and non-gaseous ion implantation along with in-situ film modification can be achieved in a single plasma chamber. Even broader application areas of PIII&D technology are believed to be envisaged by this newly developed process. In one application of non-gaseous plasma immersion ion implantation, Ge ions were implanted into SiO2 thin film at 60 keV to form Ge quantum dots embedded in SiO2 dielectric material. The crystalline Ge quantum dots were shown to be 5~10 nm in size and well dispersed in SiO2 matrix. In another application, Ag ions were implanted into SS-304 substrate to endow the anti-microbial property of the surface. Yet another bio-application was Mg ion implantation into Ti to improve its osteointegration property for bone implants. Catalyst is another promising application field of nongaseous plasma immersion ion implantation because ion implantation results in atomically dispersed catalytic agents with high surface to volume ratio. Pt ions were implanted into the surface of Al2O3 catalytic supporter and its H2 generation property was measured for DME reforming catalyst. In this talk, a newly developed, non-gaseous plasma immersion ion implantation technique and its applications would be shown and discussed.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1078-1080
• /
• 1995

The pulsed electro-acoustic method was used as a nondestructive measurement technique of spare charge distribution in dielectric materials. In our work presented here, we measured simultaneously the space charge distribution and conduction current in the low-density polyethylene samples with elevated temperatures up to $80^{\circ}C$ and electric field up to 20kV/mm. In the temperature less than $50^{\circ}C$, homocharges are mainly accumulated close to the electrodes under DC bias and after grounding. At the temperature exeeds $50^{\circ}C$, heterocharges are accumulated near the opposite electrode under DC bias. However after grounding the upper electrode, this charges immediately disappeared. The conduction current in LDPE at $20^{\circ}C$ and $30^{\circ}C$ was reduced slowly with increasing interval of applied voltage. But as temperature increased, the conduction current tended to increase slowly with the time and the degree of increase is enlarged.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.346-352
• /
• 1999

Diamond-like carbon (DLC) lims were deposited by using end hall type ion gun. Benzene gas was used for the generation of carbon ions. In order to systematically control the ion energy, we applied to the substrate DC, pulsed DC or 250 kHz medium frequency bias voltage, DLC films of superior mechanical properties of hardness 39$\pm$4 GPa and elastic mudulus 290$\pm$50GPa (2 to 6 times better than those of the films deposited by plasma assisted CVD method) could be obtained. Deposition rate was much higher than when using Kaufman type ion source, which results from higher ion beam current of end hall type ion gun. The mechanical properties and atomic bond structure were independent of the bias voltage type ion gun. The mechanical properties and atomic bond structure were independent of the bias voltage type but intimately related with the magnitude of the bias voltage. With increasing the negative bias voltage, the structure of the films changed to graphitic one resulting in decreased content of three dimensional inter-links. Degradation of the mechanical properties with increasing bias voltage could be thus understood in terms of the content odf three dimensional inter-links.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.511-514
• /
• 2010

Perfluorinated polymer($Cytop^{TM}$) was deposited on selective area of AlGaN/GaN HEMT structure using low cost and simple spin-coating method, and the electrical characteristics of the device was analyzed for application of passivation layer on semiconductors. Gate lag measurement results of $Cytop^{TM}$ passivated and unpassivated HEMT were compared. Passivated device shows improved 65 % pulsed drain current of dc mode value. Rf measurements were also performed. $Cytop^{TM}$ passivated HEMT have similar rf performance to PECVD grown $Si_3N_4$ passivated device. $Cytop^{TM}$ passivation layer may play an important role in mitigating surface state trapping in the region between gate and drain.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.193-193
• /
• 2010

HIPIMS(High sputtering impulse magnetron sputtering)은 수십 ${\mu}s$의 짧은 pulse 동안 수kw의 매우 높은 파워를 인가할 수 있어 밀도 $10^{13}/cm^3$ 이상의 고밀도 플라즈마 방전이 가능하여 스퍼터된 타겟 이온들의 이온화율이 매우 높은 특징을 가진다. HIPIMS를 통해 증착한 박막의 경우 매우 치밀한 조직을 가지고 있어 기존 DC, Pulsed DC, RF 증착을 통한 박막에 비해 우수한 물성을 보여준다. 본 실험에서는 대면적의 고품위 Al:ZnO 박막을 증착하기위하여 HIPIMS 증착법을 사용하였다. 1000mm폭 타겟상에서 균일한 증착을 위하여 Balanced B-field, Unbalanced field를 각각 인가하여 실험하였다. 시뮬레이션을 통하여 타겟 중심부와 가장자리의 자기장을 결정하였으며, target edge에서의 증착율과 cathode erosion 방지를 위하여 원형 트랙형으로 보조 자석을 설치하였다. $Al_2O_3$(2wt%)가 첨가된 planar target을 사용하였고, power는 700 W~2 kW, 그리고 pulse 폭은 $50-150 {\mu}s$정도로 변화시켜 가면서 상온에서 증착하였다. 플라즈마 가스로는 Ar만을 사용하여 두께는 60-100 nm정도로 증착하였다. Plasma emission monitoring을 통해 측정한 결과 Balanced B-field 에 비해 Unbalanced B-field 조건 에서 스퍼터된 이온들의 균일도가 우수하였으며 증착된 박막의 균일도 또한 증가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.311-311
• /
• 2010

본 논문은 직류전원에 펄스주파수를 인가함으로써 AZO 박막이 미치는 영향에 대해 알아보기 위해 기존과는 다른 형태인 원통형의 회전(Cylindrical rotatable)하는 방식을 가진 DC magnetron sputter를 이용하였다. 인가되는 전력과 압력, 온도 그리고 거리는 각각 고정하였고 펄스 주파수 가변을 통해 박막의 전기적, 광학적, 구조적 그리고 SEM등의 다양한 특성에 대해 확인하였다. 박막의 광학적 특성인 투과도를 알아보기 위해 UV-Vis를 이용하여 측정하였고 가변 범위에 관계없이 550 nm의 파장 길이에서 약 90%의 투과도를 보였다. 그리고 펄스주파수가 증가할수록 XRD의 Intensity는 오히려 감소되는 경향을 보였고, 홀 측정을 통해 비저항의 증가와 전자농도 증가, 감소된 홀 이동도를 통해 증가된 펄스 주파수가 박막의 구조적, 전기적 특성이 얼마나 많은 영향을 끼치는지 또한 알 수 있었다. 그리고 펄스주파수는 면저항과 홀 이동도의 감소 요인이며 이것은 XRD의 결과로 확인하였다. 펄스주파수가 향후 박막 태양전지 및 TFT와 NVM 등의 소자를 적용하는데 있어 중요한 요소 중의 하나로 판단할 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.752-758
• /
• 2004

This paper reports on the DC and RF characteristics of AlGaN/InGaN/GaN high electron-mobility transistors (HEMTs) grown by molecular beau epitaxy(MBE) on sapphire substrates. The devices with a 0.5 ${\mu}$m gate-length exhibited relatively flat transconductance(g$\_$m/), which results from the enhanced carrier confinement of the InGaN channel. The maximum drain current was 880 mA/mm with a peak g$\_$m/ of 156 mS/mm, an f$\_$T/ of 17.3 GHz, and an f$\_$MAX/ or 28.7 GHz. In addition to promising DC and RF results, pulsed I-V and current-switching measurements showed little dispersion in the unpassivated AlGaN/InGaN HEMTs. These results suggest that the addition of In to the GaN channel improves the electron transport characteristics as well as suppressing current collapse that is related to the surface trap states.