• 제목/요약/키워드: Pulse width measurement

검색결과 92건 처리시간 0.029초

An Efficient Pulse Width Measurement Method using Multiphase Clock Signals for Capacitive Touch Switches

  • Seong, Kwang-Su
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권4호
    • /
    • pp.773-779
    • /
    • 2013
  • We propose an efficient method to measure a pulse width using multiphase clock signals generated from a ring oscillator. These clocks, which have the same frequency and are evenly spaced, give multiple rising edges within a clock cycle. Thus, it is possible to measure a pulse width more accurately than with existing single clock-based methods. The proposed method is applied to a capacitive touch switch. Experimental results show that the capacitive touch switch with the proposed method gives a 118 fF resolution, which is 6.4 times higher than that of the touch switch with a single clock-based pulse width measurement method.

An Operating Frequency Independent Energy Measurement Technique for High Speed Microprocessors

  • Thongnoo, Krerkchai;Changtong, Kusumal
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.2051-2054
    • /
    • 2004
  • This paper proposes a more accurate task level energy measurement technique for high speed microprocessors. The technique is based on the relationship of the amount of current consumed by the microprocessor and the pulse width of the power supply controller chip, employed in the synchronous buck DC-DC converter in the microprocessor's power supply. The accuracy of the measurement is accomplished by measuring variation in pulse width in each power supply cycle. The major advantage of this technique is that its accuracy does not depend on the operating frequency of the microprocessor. To prove the proposed technique, we implemented the measurement unit of the microprocessor energy meter using an FPGA chip operating at 50 MHz. Both static and dynamic load measurement are tested in order to obtain some behaviours. Moreover, various commercially available mainboards which employ synchronous buck regulators at 200 KHz switching frequency, were measured. The results agree with previous works with better accuracy at higher operating frequency.

  • PDF

실시간 자기상관계의 제작과 CW mode-locked Nd:YLF 레이저의 펄스폭 측정 (Development of Real Time Autocorrelator and the Measurement of Pulse Width of CW Mode-Locked Nd:YLF Laser)

  • 안승준;전영민;공홍진
    • 한국광학회지
    • /
    • 제2권4호
    • /
    • pp.197-202
    • /
    • 1991
  • 극초단 레이저 펄스의 펄스폭(pulse width)을 측정하기 위하여 SHG방법을 이용한 실시간(real time) 자기상관계(autocorrelator)를 개발하였다. 본 연구에서 개발한 자기상관계의 측정법위는 142 ps이며, 지연(delay) block을 한쪽 arm에 삽입하면 250ps까지 측정범위가 확장된다. CW mode-locked Nd:YLF 레이저의 공진기 길이가 mode-locker의 RF 주파수와 matching 되었을 때 가장 짧은 20ps의 펄스폭을 측정하였으며, 공진기 길이를 detuning함에 따란 39ps와 47ps의 펄스폭을 측정 하였다.

  • PDF

Using Pulse-Front Tilt to Measure Laser Pulses Less Than 100 Picoseconds in Duration

  • Jeong, Hoon
    • 한국광학회지
    • /
    • 제26권6호
    • /
    • pp.318-321
    • /
    • 2015
  • We demonstrate a frequency-resolved optical grating (FROG) device for measuring the intensity and phase versus time of several-tens-of-picoseconds laser pulses, using a thick nonlinear optical crystal. The huge pulse-front tilt generated by a holographic grating increases the temporal range of the device, which can make a single-shot measurement of laser pulses less than 100 ps in duration. To verify the measurement technique, we generate double pulses using a Michelson interferometer. The measured duration of a single pulse is about 300 fs and the measured maximum delay of two pulses is 60 ps, which implies that the proposed FROG device can measure laser pulses with maximum pulse width of about 120 ps.

Hybrid Pulse Width Modulation Strategy for Wide Speed Range in IPMSM with Low Cost Drives

  • Ahn, Han-woong;Go, Sung-chul;Lee, Ju
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권3호
    • /
    • pp.670-674
    • /
    • 2016
  • The control performance of hybrid PWM inverter using a phase current measurement is presented in this paper. The hybrid PWM technique consists of space vector pulse width modulation (SVPWM) and six-step voltage control operation. The SVPWM is performed to reduce the harmonic components in the low speed region, and the six-step modulation is applied to increase the maximum speed of the IPMSM in the high speed region. Therefore, it is possible to obtain a great performance in both the low speed range and high speed range. However, the six-step modulation cannot be completely implemented, since the inverter that includes the lag-shunt sensing method has an immeasurable current region. In this paper, a quasi-six-step modulation using a modified voltage vector is proposed. The validity and usefulness of the proposed PWM technique is verified by MATLAB/Simulink and experimental results.

능동 배열 레이더 시스템 구현을 위한 반도체형 송수신기 설계 (Design of Solid-State Transmitter and Receiver for Active Array Radar System)

  • 이유리;김종필;이수호;정명득
    • 한국전자파학회논문지
    • /
    • 제21권12호
    • /
    • pp.1335-1342
    • /
    • 2010
  • 본 논문에서는 능동 배열 레이더 시스템에 적용 가능한 S-band, $\bigcirc$ kW급 반도체형 송수신기의 설계 및 제작측정에 관해서 소개하였다. 이득 63 dB, 최장 펄스 폭 200 usec, 최대 duty 10 %, 펄스간 안정도 63 dB의 송신 특성을 가지며, 이득 23 dB, 잡음 지수 3.2 dB의 수신 특성을 갖는다. 펄스간 안정도 분석을 위해 펄스 네트워크 분석기를 수신 모드로 사용하여 별도의 실험 셋업을 구성하였다. 측정 결과, 제시된 특성을 모두 만족하는 것을 확인하였다.

Position Measurement Using Enclosed Signal Field with Pulse-Width-Modulated function

  • Ohyama, Shinji;Iizuka, Junya;Kobayashi, Akira
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.455-455
    • /
    • 2000
  • A novel pulse-width-modulated (PWM) function is introduced for precise position measurement in an enclosed signal field. An amplitude modulation was used to light the LEDs for the conventional study. However, the transform properties from the driving signal to the lighting intensities of the LEDs are non-linear, and accurate control of the lighting power was necessary. Therefore, a lighting function independent of these properties is desired. Well-known PWM functions are used to construct the enclosed signal field by simulation, and the precision of the phase detecting system is analyzed. A novel "axial symmetry PWM" function is found to be effective for orthogonal pahse detection.

  • PDF