• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.94-101
• /
• 2012

In this paper, The Next Generation High Speed Railway inverter system based on IPMSM drives using Random Pulse Position Modulation is proposed to reduce electromagnetic noise. To verify the validity of study, the simulator for the proposed system is designed and impplemented. Simulation program is developed using Matlab/Simulink. The simulation results of the proposed system was compared with the system using conventional method. The results show that the voltage and current harmonics of the proposed Next Generation High Speed Railway Inverter system. significantly decrease and spread into wide band area by the proposed Random Pulse Position modulation technique based on Space Vector Modulation method.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2008년도 제7회 추계학술대회 및 정기총회
• /
• pp.351-354
• /
• 2008

• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.271-278
• /
• 2009

A new modulation scheme called multicoded-pulse position modulation (MC-PPM) is proposed for an ultrawideband (UWB) impulse radio communication system. The multicoded signal is generated by using several orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multicoded signal is converted to pulse position which results in not only an improved data rate, but also a processing gain in reception, delivering the power-efficient benefit of PPM and guaranteeing the low pulse energy for UWB systems. We notice that the modulation of multi-level values of the multicoded signal to pulse position is more efficient in terms of achievable data rate than the modulation of transmitting data based on other PPM schemes within given bandwidth and pulse energy. Therefore, as a performance measure, we focus on the achievable data rate (link capacity) of the proposed scheme and analyze it theoretically. Through simulation, we compare the link capacity of the MC-PPM scheme and other PPM schemes, such as M -ary PPM and multiple PPM. With the fixed bandwidth and same pulse energy condition, the UWB system based on the proposed MC-PPM scheme shows good link capacity and an increased data rate as L increases, which is contrary to other PPM schemes.

• 한국항해항만학회지
• /
• 제35권10호
• /
• pp.811-816
• /
• 2011

이 논문에서는 저전력 통신 기법 가운데 하나인 PSPM(Phase Shift Pulse position Modulation) 전송 기법이 근거리 수중음향 채널에서 어떠한 성능을 나타낼지 고찰하기 위해 해상실험을 통해 분석하였다. PSPM은 QPSK(Quadrature Phase Shift Keying)와 PPM(Pulse Position Modulation) 기법을 서로 혼합한 형태로 WBAN(Wireless Body Area Network) 시스템에서 저전력 통신을 위해 제안된 기법이다. 이는 기존의 일반적인 전송 방식에 비해 대역효율은 떨어지지만 전력효율은 증가하는 것으로 알려져 있다. 이 논문에서는 실해역에서 취득한 PSPM 데이터를 통해 BER 성능을 분석한다. 실험 결과 QPSK의 경우 총 56,000개의 전송 데이터 비트 중 오차 비트 수가 3,384개로 BER이 약 $6.04{\times}10^{-2}$이고, PSPM의 경우는 19,652개로 BER이 약 $3.5{\times}10^{-1}$를 얻었다. 또한 영상 데이터 전송에 따른 PSNR(Peak signal-to-noise ratio)을 비교한 결과 QPSK의 경우 9.37 dB 였으며, PSPM의 경우 9.11 dB 였다.

• 한국통신학회논문지
• /
• 제31권6C호
• /
• pp.569-574
• /
• 2006

PPM(Pulse Position Modulation)을 기반으로 하는 초광대역(ultra-wide bandwidth) 무선전송 시스템의 일반적인 전력 밀도 함수(power spectral density function)를 유도한다. 또한 개선된 선 스펙트럼(line spectrum) 특성과 우수한 BER(Bit Error Rate) 성능을 갖는 초광대역 무선전송 시스템을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2467-2469
• /
• 1998

We examine the performance of high-speed non-directed infrared links using pulse-position modulation (PPM) with trellis-coded modulation (TCM) to mitigate the effects of multipath-induced intersymbol interference(ISI) on such links. Using the measured characteristics of multipath indoor infrared channels, we calculate BER curves and ISI power penalties for maximum-likelihood sequence detection of 8-PPM links using rate-2/3 trellis codes operation at 10 and 30Mb/s. Our results indicate that the suggested decoder of PPM with TCM is a very promising decoder on high-speed non-directed infrared channels.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.107-114
• /
• 2012

In this paper, we propose a new modulation scheme called multi-coded variable pulse position modulation (MC-VPPM) for visible light communication systems. Two groups of signals (Pulse Width Modulation (PWM) and Pulse Position Modulation (PPM) groups) are multi-coded by orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multi-coded signal is converted to pulse width and position which results in not only an improved data rate, but also a processing gain in reception. In addition, we introduce average duty ratio and cyclic shift concepts in PWM through which dimming control for light illumination can be supported without any degradation in communication performance. Through simulation, we confirm that the proposed MC-VPPM shows a comparable BER curve and much greater achievable data rate than the conventional VPPM scheme using a visible light optical channel environment.

• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.105-111
• /
• 2005

This paper is concerned with the active vibration control of smart structure using actuator signal made of pulse width modulation. The pulse width modulation has been used in motor control, where the amount of energy fed into the motor is controlled by the pulse width instead of applied voltage. The advantage of using the pulse width modulation is that analog signal can be replaced by the digital signal so that we can reduce system costs and power consumption. The effect of pulse width modulation on the vibration response was investigated in this study and the valid transformation rule was found. Then, the pulse width modulation was realized using a microprocessor and electronic circuit. The active vibration suppression was carried out by combining the positive position feedback controller and the pulse width modulation. The experimental result shows that we can replace an expensive amplifier with a pulse width modulation system thus reducing the system cost. The result also shows that the active vibration control can be achieved by the pulse width modulation technique.

• ETRI Journal
• /
• 제35권2호
• /
• pp.188-192
• /
• 2013

Previous work proposed combining multipulse pulse position modulation (MPPM) with pulse amplitude modulation to form multipulse amplitude and position modulation (MPAPM), which is a hybrid modulation that results in an improvement in bandwidth efficiency but a degradation in power efficiency. In this paper, to achieve greater power efficiency and a better data rate, we propose multipulse dual amplitude-width modulation, based on MPAPM and pulse width modulation. The proposed scheme shows a remarkable improvement in data rate and a 1.5-dB improvement in power efficiency over MPAPM, while sustaining the bandwidth efficiency. After introducing symbol structure, we present the theoretical expressions of spectral efficiency, the power requirements, and the normalized data rate, as well as the results of comparing the proposed modulation to MPPM and MPAPM.

• 한국정보통신학회논문지
• /
• 제9권8호
• /
• pp.1656-1662
• /
• 2005

본 논문에서는 기존의 UWB 통신 시스템에서 많이 사용되는 펄스 위치 변조와 펄스 진폭 변조를 사용하여 하나의 펄스로서 여러 비트의 데이터를 전송할 수 있는 M-PPAM(M-ary Pulse Position and Amplitude Modulation) 구조를 소개하였다. 이 방법은 동일한 데이터 전송율을 얻기 위하여 보다 긴 펄스 반복 주기를 사용할 수 있는 장점이 있다. 따라서 실내 환경에서와 같은 다중 경로 페이딩이 심한 경우 대용량의 데이터를 전송하기에 적합하리라고 생각한다. 이때, 다중 사용자를 수용하기 위하여 DS(Direct Sequence) 기법을 사용하였다. 이와 같이 고려된 M-PPAM DS-UWB 수신기의 성능을 가우시안 채널 조건하에서 다중 사용자 간섭을 포함하여 표준 가우시안 근사(Standard Gaussian Approximation)를 사용하여 모델링 하였다. 또한, 수신기의 성능을 시뮬레이션을 통하여 확인하였다.