• 제목/요약/키워드: Pulse analyzing system

검색결과 52건 처리시간 0.022초

오프셋 전압을 이용한 계통 연계형 3상 3레벨 T-type 태양광 PCS의 중성점 전압 불평형 보상 (Compensation of Unbalanced Neutral Voltage for Grid-Connected 3-Phase 3-Level T-type Photovoltaic PCS Using Offset Voltage)

  • 박관남;최익;최주엽;이영권
    • 한국태양에너지학회 논문집
    • /
    • 제37권6호
    • /
    • pp.1-12
    • /
    • 2017
  • The DC link of Grid-Connected 3-Phase 3-Level T-type Photovoltaic PCS (PV-PCS) consists of two series connected capacitors for using their neutral voltage. The mismatch between two capacitor characteristics and transient states happened in load change cause the imbalance of neutral voltage. As a result, PV-PCS performance is degraded and the system becomes unstable. In this paper, a mathematical model for analyzing the imbalance of neutral voltage is derived and a compensation method using offset voltage is proposed, where offset voltage adjusts the applying time of P-type and N-type small vectors. The validity of the proposed methods is verified by simulation and experiment.

QUANTITATIVE MONITORING OF TISSUE OXYGENATION BY TIME-RESOLVED SPECTROSCOPY

  • Yamashita, Yutaka;Oda, Motoki;Ohmae, Etsuko;Tsuchiya, Yutaka
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.2101-2101
    • /
    • 2001
  • Near-infrared spectroscopy is now being used in clinical diagnosis as a non-invasive monitor of tissue oxygenation state. However, due to lack of the optical pathlength information within tissues, it is still difficult to quantitate the hemoglobin concentration with present CW techniques. Time-resolved spectroscopy (TRS), which measures temporal profiles of emerging light from tissues, enables to estimate the pathlength distribution within tissues by converting time to distance. Consequently, quantitative measurement of tissue oxygenation is possible by analyzing the data with optical diffusion equation 1) or our Microscopic Beer-Lambert law2). Time-Resolved Spectroscopy System : TRS-1O3) Our TRS-10 system consists of a three-wavelength (759, 797, 833 nm) PLP as pulsed light source, a high speed PMT with high sensitivity and three signal-processing circuits for time-resolved measurement (CFD/TAC, A/D converter and histogram memory). Optical pulse train consisting of 759, 797 and 833nm is generated by PLP at 5㎒ repetition rate and irradiated a sample through a single optical fiber. The diffuse-reflected light from the sample is collected by a bundle fiber and then detected by the PMT for single photon measurement. After being amplified by a following fast amplifier, the electrical signals for each wavelength are picked out by CFD/TAC module. Then, a signal processing circuit integrated the TRS data for each wavelength individually. The simultaneous TRS measurement for three wavelengths achieved without any optical or mechanical switch. Experiment and Results Input and detection fibers of TRS-10 were attached at the human forehead with a fiber separation of 3cm. TRS measurements were continuously performed for about 20 minutes including 2 minutes hyper ventilation. It was observed that the total hemoglobin concentration was decreasing during the hyper ventilation and recovered until 2 minutes after hyper ventilation. On the other hand, the deoxy-hemoglobin concentration began to increase after hyper ventilation and had its peak at around 2 minute later, showing 502 drop from 75% to 60% due to inhibition of breathing by performing hyper ventilation. The results showed that this system might be able to quantitate the concentrations of oxy- and deoxy-hemoglobin in the human brain.

  • PDF

차량용 사고 상황 감지 시스템의 설계 및 구현 (Design and Implementation of a Motor Vehicle Emergency Situation Detection System)

  • 강문설;김유신
    • 한국정보통신학회논문지
    • /
    • 제17권11호
    • /
    • pp.2677-2685
    • /
    • 2013
  • 차량에서 수집된 차량 운행 데이터는 차량에서 발생한 영상 데이터 및 센싱 데이터가 그대로 기록된 것이기 때문에 외부에서 차량에서 일어나는 일을 분석하여 판단할 수 있는 객관적인 데이터로 이용할 수 있다. 본 논문에서는 차량의 움직임 및 운전자의 조작 상태를 감지하고 분석하여 실제 도로 상황에서 차량 충돌 사고가 발생했을 때, 차량의 움직임, 운전자의 각종 조작상태, 충돌 펄스 및 충돌과 관련된 신호들을 감지하고 저장하여 분석하는 사고 상황감지 시스템을 설계 및 구현하였다. 제안한 시스템에서는 충돌 직전 운전자의 반응, 차량의 조작 상태 및 물리적인 움직임에 대한 정보를 제공한다. 이렇게 수집하여 분석한 차량 운행 데이터는 충돌 사고가 발생했을 때, 사고 원인을 규명하고 공정한 사고처리에 이용할 수 있으며, 운전자의 운전 습관을 파악하여 잘못된 운전 습관의 교정 및 유류비 절감 등의 효과를 얻을 수 있다.

영상 인식 및 생체 신호를 이용한 운전자 졸음 감지 시스템 (Driver Drowsiness Detection System using Image Recognition and Bio-signals)

  • 이민혜;신성윤
    • 한국정보통신학회논문지
    • /
    • 제26권6호
    • /
    • pp.859-864
    • /
    • 2022
  • 매년 교통사고의 가장 큰 원인으로 손꼽히는 졸음운전은 운전자의 수면 부족, 산소 부족, 긴장감의 저하, 신체의 피로 등과 같은 다양한 요인을 동반한다. 졸음 유무를 확인하는 일반적인 방법으로 운전자의 표정과 주행패턴을 파악하는 방법, 심전도, 산소포화도, 뇌파와 같은 생체신호를 분석하는 방법들이 연구되고 있다. 본 논문은 영상을 검출하는 딥러닝 모델과 생체 신호 측정 기술을 이용한 운전자 피로 감지 시스템을 제안한다. 제안 방법은 일차적으로 딥러닝을 이용하여 운전자의 눈 모양과 하품 유무, 졸음으로 예상되는 신체 동작을 파악하여 졸음 상태를 감지한다. 이차적으로 맥파 신호와 체온을 이용하여 운전자의 피로 상태를 파악하여 시스템의 정확도를 높이도록 설계하였다. 실험 결과, 실시간 영상에서 운전자의 졸음 유무 판별이 안정적으로 가능하였으며 각성상태와 졸음 상태에서의 분당 심박수와 체온을 비교하여 본 연구의 타당성을 확인할 수 있었다.

평균필터기반 항공레이저측량 자료의 지면정보 추출기법 (Extracting Ground Information from Airborne Laser Scanning Data based on Mean Filtering Method)

  • 최연웅;이근상;채효석;조기성
    • 한국지리정보학회지
    • /
    • 제8권4호
    • /
    • pp.61-70
    • /
    • 2005
  • 항공레이저측량시스템은 레이저펄스가 투과하지 못하는 건물지역에서는 DEM을 구축하기 위해 원시 DSM 자료로부터 건물 등의 지물을 제거하는 전처리 과정이 필요하다. 본 연구에서는 항공레이저측량을 이용하여 구축한 DSM 자료로부터 다양한 크기의 평균필터를 적용하였으며, 표준편차 변화율을 분석하여 $39{\times}39$를 최적의 필터크기로 결정하였다. 또한 최적필터를 적용하여 분석한 DEM과 항공레이저측량 원시 DSM 자료를 상호 비교함으로서 표준오차 ${\pm}0.065m$를 확보할 수 있었다. 따라서, 본 연구에서 제시한 평균필터기법이 경사가 완만한 도시지역내 DEM을 추출하는데 매우 효과적임을 알 수 있었다.

  • PDF

Research of Phase Correlation Method for Identifying Quantitative Similarity in Adjacent Real-time Streaming Frame

  • Cho, Yongjin;Yun, Yeji;Lee, Kyou-seung;Oh, Jong-woo;Lee, DongHoon
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2017년도 춘계공동학술대회
    • /
    • pp.157-157
    • /
    • 2017
  • To minimize the damage by wild birds and acquire the benefits such as protection against weeds and maintenance of water content in soil, the mulching black color vinyl after seeding should be carried out. Non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. Non-linear integral interpolation was one of method for analyzing the frequency using the normalization image and then arbitrarily increasing the limited data value of $16{\times}4pixels$ in one frame. It was a method to relatively reduce the size of overlapping pixels by arbitrarily increasing the limited data value. The splitted frames into 0.1 units instead of 1 pixel can propose more than 10 times more accurate and original method than the existing correction method. The non-integral calibration method was conducted by applying the subdivision method to the pixels to find the optimal correction resolution based on the first reversed frequency. In order to find a correct resolution, the expected location of the first crop was indicated on near pixel 4 in the inversion frequency. For the most optimized resolution, the pixel was divided by 0.4 pixel instead of one pixel to find out where the lowest frequency exists.

  • PDF

전기자동차 LDC 시스템의 전도 방출에 관한 고주파 모델링 연구 (High-Frequency Circuit Modeling of the Conducted-Emission from the LDC System of a Electric Vehicle)

  • 정기범;조병찬;정연춘
    • 한국전자파학회논문지
    • /
    • 제24권8호
    • /
    • pp.798-804
    • /
    • 2013
  • 본 논문에서는 고주파 회로 모델링을 이용하여 전기자동차의 LDC로부터 방출되는 전도성 전자파 잡음을 시스템-레벨에서 분석하였다. 관련 전도 방출의 주요 원인은 LDC에서 사용하는 펄스폭 변조 방식의 100 kHz 스위칭 동작에 기인하며, 이러한 전도 방출은 공통-임피던스 결합 및 유도성 결합을 통해 AM/FM 주파수 대역에서의 무선주파수 간섭을 유발한다. 이러한 문제를 분석하기 위해 LDC를 구성하고 있는 MOSFET과 고압 커패시터, 고전압 케이블과 버스 바에 대한 기본 회로는 물론, 각 부분에서 존재하는 기생 성분 및 비선형 특성을 해석하여 LDC 전체를 포함한 시스템-레벨의 고주파 등가회로 모델을 제안하였다. 이러한 모델을 이용하여 시뮬레이션과 측정을 비교하여 유사성을 검증하였다. 향후 이러한 접근 방법이 전기자동차의 전자파 적합성 설계에 효과적으로 사용될 수 있을 것으로 기대한다.

조선 의원 이원풍(李元豊)의 마진 의서, 『마진휘성(麻疹彙成)』연구 (A Study on the Majinhwiseong (麻疹彙成), a Medical Text on Measles Written by Joseon physician Lee Wonpung)

  • 오재근
    • 대한한의학원전학회지
    • /
    • 제35권3호
    • /
    • pp.41-58
    • /
    • 2022
  • Objectives : In this paper, the outline and overall content of the Majinhwiseong, a specialized medical text on measles written by Lee Wonpung was introduced, along with its academic historical meaning. Methods : The entire Majinhwiseong was analyzed according to content and form. In terms of form, organization, construction, cited literature, etc., were studied, while in terms of content, diagnosis of disease pattern and treatment formulas were studied. Later, based on cited medical texts and the author's social position, the academic historical meaning of this book was discussed. Results : Through the Majinhwiseong, Lee Wonpung strengthened the credibility of the text by not only providing medical knowledge on measles but listing their sources and comparing and analyzing related contents. In the diagnosis part, Lee focused on the changes in symptom, shape, color, and pulse of measles, discussing in detail its differential diagnostic methods. In the treatment part, while listing numerous formulas suggested by Ming (明) masters, Lee did not leave out treatment experiences of Joseon physicians. Meanwhile, the Majinhwiseong is indicative of measles medicine in 18th century Joseon having been progressed in the private sector rather than the official, and how the results of private sector medicine were being absorbed into the official realm through the Uiyakdongcham (議藥同參) system. Conclusions : The Majinhwiseong is a practical treatment manual written by clinician Lee Wonpung to deal measles which was widely spread at the time. The author organized existing medical knowledge on measles for clinicians while reflecting outcomes and medical situation of Joseon physicians in this book. Based on these findings, we could verify that medicine in 18th century Joseon had been progressing actively around the private medical sector.

플라스틱 Scintillator와 NaI(TI) 검출기를 이용한 다수의 방사선원 위치를 3차원으로 판별하는 측정시스템 개발 (Development of 3D Radiation Position Identification System of Multiple Radiation Sources using Plastic Scintillator and NaI(TI) Detector)

  • 곽동훈;고태영;이승호
    • 전기전자학회논문지
    • /
    • 제22권3호
    • /
    • pp.638-644
    • /
    • 2018
  • 본 논문에서는 플라스틱 Scintillator와 NaI(TI) 검출기를 이용하여 움직이는 차량 적재물에 존재하는 다수의 방사선원 위치를 3차원으로 판별하는 측정시스템을 제안한다. 제안하는 시스템은 방사선량 측정용 플라스틱 Scintillator, 2채널 펄스 카운터, 핵종 분석용 NaI(TI) 검출기 및 1채널 MCA Board 등으로 구성된다. 방사선원 위치판별 알고리즘은 방사선량의 거리의 자승에 반비례한 특성($1/r^2$)과 장치와의 각도(${\theta}$)에 따른 보상을 통해 계산된 방사선원의 CPS 값의 비율을 SVM 분류를 통하여 방사선원의 위치(X, Y)를 구할 수 있다. (Z) 좌표 값은 단위 시간당 움직이는 대상체의 속도에 따라 정해지게 되며 이는 단위주기당 백그라운드 스펙트럼을 제외한 순수 핵종의 스펙트럼을 분석한 후 핵종 유무 판별을 진행한 뒤 해당 핵종의 위치를 판별하게 된다. 본 논문에서 제안한 시스템의 위치 판별 실험 결과 ${\pm}1m$ 이내의 국제표준오차를 나타내었다. 따라서 본 논문에서 제안한 시스템의 유효성이 입증되었다.

국방 EMP 방호능력의 효율적 개선을 위한 방안 연구 (A Study for the Efficient Improvement Measures of Military EMP Protection Ability)

  • 정승훈;안재춘;황영규;정현주;신용태
    • 예술인문사회 융합 멀티미디어 논문지
    • /
    • 제7권1호
    • /
    • pp.219-227
    • /
    • 2017
  • 현재 군 지휘정보체계는 반도체칩이 장착된 전자기기의 활용도가 높으며, 최신 정보통신기술 발전에 따라 그 비중은 더욱 증가할 것으로 예상된다. 전기를 사용하는 전자기기의 경우 고출력 전기신호에 대한 일정한 내성을 보유하고 있다. 이러한 전자기기 내성을 기준화 한 것이 EMC 규격이다. 한편 원자력 연구원에서는 서울 상공 100km지점에서 10kt급의 핵폭발이 발생할 경우 반경 170km 지역까지 고출력전자기파가 발생하여 해당지역 대부분 전자장비에 피해가 예상된다는 시뮬레이션 결과를 발표한 바 있다. 이러한 경우 발생하는 영향을 방호하기 위한 기준은 EMP 방호 규격으로 정의된다. 대부분의 상용 전자기기의 경우 EMC 기준은 충족하지만 EMP 기준을 충족하는지의 여부를 확인할 수가 없다. EMP 방호기준 충족여부를 확인하기 위한 장비와 절차가 쉽지 않고 비용적인 측면이 있기 때문이다. 보통 부득이한 경우를 제외하고는 EMP 방호기준 충족여부에 대해서는 검증하지 않는 실정이다. 이점을 고려하여 본 연구에서는 EMC-EMP 상관관계 분석을 통하여 일반 전자기기의 EMP 방호능력에 대해서 확인하고 이를 바탕으로 EMP 방호능력 향상방안을 확인하였다.