• 한국광학회지
• /
• 제14권5호
• /
• pp.483-490
• /
• 2003

EIT 구도에 비결맞음 광펌핑(incoherent optical pumping) 과정을 더하여 구성된 밀도 반전 없는 광증폭(Amplification without inversion; AWI)매질에서 광펄스의 전파 과정에 대한 이론적인 분석을 실시하였다 펌핑광의 세기를 변화시킴으로써 광펄스의 군속도를 제어할 수 있음을 실험적으로 관측한 논문[Kim et al., J. Phys. B, 36 (2003)]을 이론적으로 설명하기 위차여 5 준위 원자계를 모형으로 선택하여 밀도행렬방정식을 적용하였다. 특히,본 연구에서 분석한 AWI 구도는 지금까지 연구되어 온 구도와 달리 EIT 구도 밖의 독립적인 에너지 준위들 사이의 전이선을 이용함으로써 보다 많은 원자들이 상호작용에 기여할 수 있는 구도이다. AWI증폭 효율에 결정적인 영향을 미치는 것은 바닥 준위 사이의 충돌에 의한 밀도 전이가 주요하다는 사실을 확인할 수 있었으며, 보다 많은 원자들을 상호작용에 참여시킴으로써 광펄스의 속도를 효과적으로 조절할 수 있음이 수치해석 결과를 통해 밝혔고. 이는 실험 결과와 정성적으로 일치함을 알 수 있었다.

• 한국추진공학회지
• /
• 제16권3호
• /
• pp.9-15
• /
• 2012

본 연구는 다중 접착계면에서의 초음파 전달 현상을 시스템 응답함수의 일반식을 사용하여 시뮬레이션을 수행하였고, 추진기관의 모의결함시편을 제작하여 모델링의 결과를 검증하였다. 실험 결과 추진제-라이너 미접착 결함을 초음파 펄스 반사법으로 검출할 수 있었으며, 시뮬레이션 결과와 측정된 초음파 파형이 잘 일치함을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.779-782
• /
• 1998

This paper describes a high-speed Dual-modulus Prescaler (DMP) for RF mobile communication systems with pulse remover using selective latch technique. This circuit achieves high speed and low power consumption by reducing full speed flip-flops and using a selective latch. The proposed DMP consists of only one full speed flip-flop, a selective latch, conventional flip-flops, and a control gate. In order to ensure the timing of control signal, duty cycle problem and propagation delay must be considered. The failling edgetriggered flip-flops alleviate the duty cycle problem andthis paper shows that the propagation delay of control signal doesn't matter. The maximum operating frequency of the proposed DMP with 0.6um CMOS technology is up to 2.2㎓ at 3.3V power supply and the circuit consumes 5.24mA.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권1호
• /
• pp.56-66
• /
• 1996

In this study, the characteristics of generation and propagarion of transient wave induced in the assembly of four collecting plate upon the propagation of waves are analyzed. Also double exposure holographic inteferometry using ruby pulse laser is built in order to investigate the propagation of transient waves generated by impact load. When impact load was applied at edge of connecting band, the vibration of collecting plates was generated from the contact points between collecting plate and band which connects four collecting plates. Waves generated from the lower part and those reflected from the upper part were mixed as time went on and then formed very complex shapes. Also, when impact load was aplied at center of collecting plate, the waves propagating across the convexo-concave plane were reflected partly at curved section. Therefore the vibration amplitude was decreased as the transiet waves were propagated through the convexo-concave plane.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.106-112
• /
• 1996

In this paper, the propagation of elastic wave generated by loading impact to plates made of isotropic or anisotropic material was studied. And the influence of boundary conditions(free or clamped edge) upon the reflection of elastic wave of isotropic plate such as aluminum plate showed circular interferometric fringe pattern, whereas that of anisotropic plate such as epoxy composite laminates showed elliptical one. And the transverse displacement curves obtained from experiment and theory for both plates agreed well. Also, the waves reflected from the boundary edges showed much differences according to the boundary condition of edges.

• Journal of information and communication convergence engineering
• /
• 제6권4호
• /
• pp.454-458
• /
• 2008

It can improve human being's life quality that all people can have more convenient medical service under pervasive computing environment. For a pervasive health care application for diabetes patient, we've implemented a health care system, which is composed of three parts. Various sensors monitor both outer and inner environment of human such as temperature, blood pressure, pulse, and glycemic index, etc. These sensors form zigbee based sensor network. And medical information server accumulates sensing values and performs back-end processing. To simply transfer these sensing values to a medical team is a low level's medical service. So, we've designed a new service model based on back propagation neural network for more improved medical service. Our experiments show that a proposed healthcare system can give high level's medical service because it can recognize human's context more concretely.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.912-918
• /
• 2011

본 연구는 다중 접착계면에서의 초음파 전달 현상을 시스템 응답함수의 일반식을 사용하여 시뮬레이션을 수행하였고, 추진기관의 모의결함시편을 제작하여 모델링의 결과를 검증하였다. 실험 결과 추진제-라이너 미접착 결함을 초음파 펄스 반사법으로 검출할 수 있었으며, 시뮬레이션 결과와 측정된 초음파 파형이 잘 일치함을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3211-3223
• /
• 1996

In this paper, the propagation of elastic wave generated by loading impact to plates made of isotropic of anisotropic material was studied. And the influence of boundary conditions (free or clamped edge) upon the reflection of elastic wave was anlyzed. Also, double exposure holographic interferometer using ruby pulse laser was formed in order to investigate transient waves. Before the elasitc wave was reflected from the edges, the elastic wave of isotropic plate such as aluminum plate showed circular interferometric fringe pattern, whereas that of anisotropic plate such as epoxy composite laminates showed elliptical one. And the transverse displacement curves obtained from experiment and theory for both plates agreed well. Also, the waves reflected from the boundary edges showed much differences according to the boundary condition of edges.

• The Journal of the Acoustical Society of Korea
• /
• 제16권3E호
• /
• pp.24-31
• /
• 1997

A mobile propagation characteristics for wideband DS-SS (Direct Sequence-Spectrum) signal is presented. Existing narrowband model is extended for the wideband pulse with an arbitrary shape. The received DS-SS signal in the frequency domain is the transfer function of the propagation channel weighted by the inverse Fourier transform. In this proposed method, received signal spectral density, instantaneous waveform, and Doppler spectrum of DS-SS signal via either Rayleigh of Rician channel can be obtained easily. Simulation results match well with both simulated theoretical fading statistics and classical theory. As expected, the extraction of chip timing in Rician fading shown to be more tractable than Rayleigh fading.

• Journal of Communications and Networks
• /
• 제5권4호
• /
• pp.309-318
• /
• 2003

This paper presents an in-depth study of a UWB indoor radio channel between 1 and 9 GHz, which was used for the subsequent development of a new statistical UWB multipath channel model, focusing on short range indoor scenarios. The channel sounding process was carried out covering different indoor environments, such as laboratories, halls or corridors. A combination of new and traditional parameters has been used to accurately model the channel impulse response in order to perform a precise temporal estimation of the received pulse shape. This model is designed specifically for UWB digital systems, where the received pulse is correlated with an estimated replica of itself. The precision of the model has been verified through the comparison with measured data from equivalent scenarios and cases, and highly satisfactory results were obtained.