• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.29-36
• /
• 2010

Ultrasonic inspection of heavy walled cast austenitic stainless steel(CASS)welds is very difficult due to complex and coarse grained structure of CASS material. The large size of anisotropic grain strongly affects the propagation of ultrasound by severe attenuation, change in velocity, and scattering of ultrasonic energy. therefore, the signal patterns originated from flaws can be difficult to distinguish from scattered signals. To improve detection and sizing capability of ID connected defect for heavy walled CASS piping welds, the low frequency segmented TRL Pulse Echo and Phased Array probe has been developed. The experimental studies have been performed using CASS pipe mock-up block containing artificial reflectors(ID connected EDM notch). The automatic pulse echo and phase array technique is applied the detection and the length sizing of the ID connected artificial reflectors and the results for detection and sizing has been compared respectively. The goal of this study is to assess a newly developed ultrasonic probe to improve the detection ability and the sizing of the crack in coarse-grained CASS components.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.52-61
• /
• 2000

The role of quantitative nondestructive evaluation of defects is becoming more important to assure the reliability and the safety of structure, which can eventually be used for residual life evaluation of structure on the basis of fracture mechanics approach. Although ultrasonic technique is one of the most widely used techniques for application of practical field test among the various nondestructive evaluation technique, there are still some problems to be solved in effective extraction and classification of ultrasonic signal from their noisy ultrasonic waveforms. Therefore, crack size determination through a neural network based on the back-propagation algorithm using back-scattered ultrasonic signals is established in this study. For this purpose, aluminum plate containing vertical or inclined surface breaking crack with different crack length was used to receive the back-scattered ultrasonic signals by pulse echo method. Some features extracted from these signals and sizes of cracks were used to train neural network and the neural network's output of the crack size are compared with the true answer.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.631-636
• /
• 2002

The purpose of this study was to present the method to choose the optimization machining condition for the wire electric machine. This was completed by examining the ever- changing quality of the material and by improving the function of the wire electric discharge machine. Precision metal mold products and the unmanned wire electric discharge machining system were used and then applied in industrial fields. This experiment uses the wire electric discharge machine with brass wire electrode of 0.25mm. To measure the precision of the machining surface, average values are obtained from 3 samples of measures of center-line average roughness by using a third dimension gauge and a stylus surface roughness gauge. In this experiment, we changed no-node voltage to 7 and 9, pulse-on-time to $6\mu\textrm{s}$, $8\mu\textrm{s}$ and $10\mu\textrm{s}$, pulse-off-time to $8\mu\textrm{s}$, $10\mu\textrm{s}$ and $13\mu\textrm{s}$, and experimented on wire tension at room temperature by 1000gf, 1200gf, and 1400gf, respectively

• 한국안전학회지
• /
• 제17권1호
• /
• pp.11-17
• /
• 2002

The purpose of this study was to present the method to choose the optimization machining condition for the wire electric machine. This was completed by examining the ever-changing quality of the material and by improving the function of the wire electric discharge machine. Precision metal mold products and the unmanned wire electric discharge machining system were used and then applied in industrial fields. This experiment uses the wire electric discharge machine with brass wire electrode of 0.25mm. To measure the precision of the machining surface, average values are obtained from 3 samples of measures of center-line average roughness by using a third dimension gauge and a stylus surface roughness gauge. In this experiment, we changed no-node voltage to 7 and 9, pulse-on-time to $6{\mu}s,\;8{\mu}s$ and $10{\mu}s$, pulse-off-time to $8{\mu}s,\;10{\mu}s$ and $13{\mu}s$, and experimented on wire tension at room temperature by 1000gf, 1200gf, and 1400gf, respectively.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1250-1256
• /
• 2017

In this research, a high-performance ultrasonic positioning system is proposed to track the positions of an indoor mobile object. Composed of an ultrasonic sender (mobile object) and a receiver (anchor), the system employs three ultrasonic time-off-flights (TOFs) and trilateration to estimate the positions of the object with an accuracy of sub-centimeter. On the other hand, because ultrasonic waves are interfered by temperature, wind and various obstacles obstructing the propagation while propagating in air, ultrasonic pulse debounce technique and Kalman filter were applied to TOF and position calculation, respectively, to compensate for the interference and to obtain more accurate moving object position. To perform tasks in real time, ultrasonic signals are processed full-digitally with a Zynq SoC, and as a software design tool, Vivado IDE(integrated design environment) is used to design the whole signal processing system in hierarchical block diagrams. And, a hardware/software co-design is implemented, where the digital circuit portion is designed in the Zynq's fpga and the software portion is c-coded in the Zynq's processors by using the baremetal multiprocessing scheme in which the c-codes are distributed to dual-core processors, cpu0 and cpu1. To verify the usefulness of the proposed system, experiments were performed and the results were analyzed, and it was confirmed that the moving object could be tracked with accuracy of sub-cm.

• 한국광학회지
• /
• 제12권2호
• /
• pp.129-134
• /
• 2001

본 논문에서는 일반적인 OTDR 기술로 WDM 전송시스템의 감시를 수행하는 새로운 방법을 제안하였다. 제안된 감시 방법은 전송로에 포함된 EDFA의 구조를 광회전기(optical circulator)와 FBG(Fiber Bragg Grating)를 이용하여 OTDR 광펄스의 파장에서만 양방향 전송이 가능하도록 변경하고, 전송 신호의 역방향으로 OTDR 광펄스를 삽입함으로써 EDFA의 교차이득변조에 의한 신호왜곡을 분산시켜 신호전송과 전송로 감시를 동시에 수행하는 것이다. 이 감시 방법의 타당성을 검증하기 위해 제안된 구조로 변경된 EDFA가 포함된 320km 길이의 8 채널 WDM 광전송 시스템을 구축하고 신호전송과 동시에 전송로 감시를 수행한 결과를 보였으며, 이때 전송로 감시로 인한 전송 신호 채널의 power penalty를 BERT로 측정하여 그 값이 0.3dB이하로 매우 작음을 보였다.

• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.323-327
• /
• 2013

A laser ultrasonic inspection system has the advantage of nondestructive testing. It is a non-contact mode using a laser interferometer to measure the vertical displacement of the surface of a material caused by the propagation of ultrasonic signals with the remote ultrasonic generated by laser. After raising the ultrasonic signal with a broadband frequency range using a pulsed laser beam, the laser beam is focused to a small point to measure the ultrasonic signal because it provides an excellent measurement resolution. In this paper, foreign materials are measured by a non-destructive and non-contact method using the laser ultrasonic inspection system. Mixed foreign material on the corroded part is assumed and the laser ultrasonic experiment is conducted. An ultrasonic wave is generated by pulse laser from the back of the specimen and an ultrasonic signal is acquired from the same location of the front side using continuous wave laser and Confocal Fabry-Perot Interferometer (CFPI). The characteristic of the ultrasonic signal of existing foreign material is analyzed and the location and size of foreign material is measured.

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.464-474
• /
• 2003

비파괴 시험을 위한 3차원 구조의 초음파 영상에는 다양한 결함을 명백하게 보여줄 수 있을 만큼 상세하고 쉽게 알아볼 수 있는 정보가 제공되어야 한다. 수년 동안 원자력 발전소에서 사용된 금속관에 발견되는 소규모의 균열은 전형적인 결함들인데, 이러한 밀리미터 이하의 균열이나 결함은 최종 3차원 영상에서 묘사되어야만 의미 있는 검사가 될 것이다. 향상된 선명도와 그에 따른 결함의 발견 과정의 한 단계로써, 펄스에코(pulse-echo) 초음파를 사용한 3차원 영상제작 기술을 제안한다. 이 기술은 필요한 스캐닝과 펄스에코 데이터의 처리과정을 통한 검사로 3차원 물체의 3차원 영상을 생성하는데, 2차원 위너필터(Wiener fille.)에 의해 초음파 빔을 선명하게 하는 기술을 포함한다. 제안하는 위너필터는 빔의 전달에서 펄스에코 데이터를 초음파 빔 방향의 수직방향에 따라 필터링한다. 이 3차원 처리과정은 결함의 선명성을 증진시키고 사용자에게 3차원 구조물의 좌우 회전 및 축 회전과 같은 조작 능력을 제공한다. 이러한 조작 능력은 3차원에서 다양한 결함들의 크기와 위치의 분명한 묘사를 가능하게 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.167-174
• /
• 2001

Reflection method using ultrasonic source has been attempted to obtain the information about tunnel lining structures composed of lining, shotcrete, water barrier and voids at the back of lining. In this work, two different types of sources, i.e. single-pulse source and sweep source, can be used. Single-pulse source with short time duration has the frequency content whose amplitudes tend to be concentrated around the dominant frequency, whereas sweep source with long time duration denotes a flat distribution of relatively larger amplitude over a broad frequency band, although the peak to peak amplitude of single-pulse source wavelet is equivalent to that of sweep source one. In traditional seismic application, a single-pulse source(weight drop, dynamite) is typically used. However, to investigate the fine structure, as it is the case in the tunnel lining structure, the sweep wavelet can be also a desirable source waveform primarily due to the higher energy over a broad frequency band. For the investigation purposes of sweep source, a physical modeling is a useful tool, especially to study problems of wave propagation in the fine layered media. The main purpose of this work was using a physical modeling technique to explore the applicability of sweep source to the delineation of inner layer boundaries. To this end, a two-dimensional physical model analogous to the lining structure was built and a special ultrasonic sweep source was devised. The measurements were carried out in the sweep frequency range 10 ∼ 60 KHz, as peformed in the regular reflection survey(e.g. roll-along technique). The measured data were further rearranged with a proper software (cross-correlation). The resulting seismograms(raw data) showed quitely similar features to those from a single-pulse source, in which high frequency content of reflection events could be considerably emphasized, as expected. The data were further processed by using a regular data processing system "FOCUS" and the results(stack section) were well associated with the known model structure. In this context, it is worthy to note that in view of measuring condition the sweep source would be applied to benefit the penetration of high frequency energy into the media and to enhance the resolution of reflection events.

• 한국광학회지
• /
• 제16권5호
• /
• pp.417-422
• /
• 2005

광 펄스가 대기 채널을 통해 전송될 때, 광 펄스는 대기 교란에 의해 감쇄되고 퍼지게 된다. 이러한 펄스 퍼짐이 인접 펄스간의 부호 간 간섭을 일으키고, 그 결과 인접한 펄스들은 중첩이 되어 비트전송률 및 무중계 전송거리를 제한하게 된다. 이에, 본 논문에서는 시간적 모멘트 함수를 이용하여 대기 교란상태에서 부호 간 간섭을 교란 상태를 나타내는 굴절률 구조상수로 구하고, SONET 광 전송방식에서 교란상태에 따른 부호 간 간섭을 수치해석하였다. 그 결과, 교란 정도가 심할수록 부호 간 간섭은 OC-192(9.953 Gb/s) 시스템 이하의 전송률에서는 점차적으로 증가하나, OC-768(39.813 Gb/s) 시스템 이상의 전송률에서는 급격히 증가 후 서서히 수렴함을 알 수 있었다. 또한, OC-48(2.488 Gb/s) 시스템에서는 어떠한 교란상태 하에서도 10 [km] 정도까지 정확한 정보 전송이 가능하나, 100 Gb/s 시스템에서는 $10^{-14}[m^{-2/3}]$ 이상, OC-768 시스템에서는 $10^{-13}[m^{-2/3}]$이상, OC-192 시스템에서는 $10^{-12}[m^{-2/3}]$ 이상의 교란상태에서 심한 부호 간 간섭이 발생하여 정확한 정보 전송이 불가능함을 알 수 있었다.