• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1815-1818
• /
• 2002

In this paper, a predistorter is presented for the orthogonal frequency division multiplxing (OFDM) systems with a transmit raised cosine (RC) pulse shaping filter and a high power amplifier (HPA). By exploiting zero-intersymbol interference (ISI) nature of the RC filter, the proposed predistorter placed before the filter only utilizes memoryless nonlinearity of the HPA, not the overall nonlinearity with memory induced by a combination of the filter and HPA. The predistirtion is realized upon fixed point iteration on OFDM symbols. Simulation results show that the proposed predisorter can be effectively employed to achieve significant performance improvement.

• Structural Monitoring and Maintenance
• /
• 제2권4호
• /
• pp.383-397
• /
• 2015

This article identifies and addresses current limitations on the use of numerical models for validation and/or calibration of damage detection methodologies that are based on the analysis of the high frequency response of the structure to identify the occurrence of abrupt anomalies. Distributed-plasticity non-linear fiber-based models in combination with experimental data from a full-scale reinforced concrete column test are used to point out current modeling techniques limitations. It was found that the numerical model was capable of reproducing the global and local response of the structure at a wide range of inelastic demands, including the occurrences of rebar ruptures. However, when abrupt sudden damage occurs, like rebar fracture, a high frequency pulse is detected in the accelerations recorded in the structure that the numerical model is incapable of reproducing. Since the occurrence of such pulse is fundamental on the detection of damage, it is proposed to add this effect to the simulated response before it is used for validation purposes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.211-214
• /
• 2001

For general laser power supply, the secondary of the power transformer is connected to the rectifier and filter capacitor. The output of a rectifier is connected to a switching element in the secondary of the transformer. So the Dower supply is complicated and the loss of switching is considerably. In addition, according to increasing pulse repetition, charged energy of energy-storage capacitor is not transferred sufficiently to flashlamp, and laser output efficiency decreases. In this raper, to improve laser efficiency, we designed and fabricated the power supply in which the SCR was turned on in zero point by the methods of ZCC(zero crossing control), PFN(pulse forming network) in result, laser output efficiency increased by hte 4% other than conventional supply, when a repetition rate was increased by the 10[pps], In 20(pps), efficiency was increased by about 8%

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.111-116
• /
• 2000

In this paper, we presented a new algebraic iterative algorithm for the optimal control of the nonlinear systems. The algorithm is based on tow steps. The first step transforms optimal control problem into a sequence of linear optimal control problem using the quasilinearization method. In the second step, TPB(two point boundary condition problem) is solved by algebraic equations instead of differential equations using BPF(block pulse functions). The proposed algorithm is simple and efficient in computation for the optimal control of nonlinear systems. In computer simulation, the algorithm was verified through the optimal control design of Van del pole system and Volterra Predatory-prey system.

• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.91-96
• /
• 2012

The surface of bushing is contaminated with rain, dust, salt and others. A bushing with contaminations in air is serious problem in insulation. Therefore, it is important to understand the inspection and diagnoses of the safety. The ultra-violet rays(UV) camera has attracted interest from the view point of easy judgement. In this paper, we will report on the corona discharge characteristics of surface flashover model with contaminations in air. Also, UV images of discharge and corona pulse count in air are analyzed using prototype UV camera of Korea and a UV sensor with an optic lens. These results are studied at both AC and DC voltage under a non-uniform field.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.533-535
• /
• 2007

The design of tunned filters for six-pulse thyrister converter is discussed. For electrolyzer system, the design procedure of tunned filters of AC 14.4kV power system are proposed by dynamic simulation. It is shown that these harmonic filters can meet most operational requirments. By careful specification of the transformer reactance, very low harmonic content and high power factor may be achieved at a specific operating point. The the proposed design procedure is verified with the simulation results.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.421-426
• /
• 2017

Herein, we investigated surface morphological characteristics of anodic films on Al6061 alloy prepared by unipolar pulsed Micro-arc oxidation (MAO) in a mixed solution of $Na_2SiO_3$ + KOH. The number and size of pores as well as craters on anodic alumina surface were studied as a function of different voltages, duty cycles and applied anodic current densities. The morphological characteristics of all samples were investigated by scanning electron microscopy, conforming that the most uniform surface morphology of MAO films on Al1050 alloy was obtained at high applied current density with low duty cycle.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.192.1-192.1
• /
• 2013

본 연구는 기존의 Sputtering 방식에 Modulation 방식을 적용한 Modulated Sputtering System (MSS)에 관한 특성 관찰과 이를 이용한 박막 증착 및 분석에 관한 내용이다. MSS에 인가하는 전압은 pulse on 시간동안 타겟에 음의 전압이 인가되어 sputtering에 의한 박막이 증착되고, pulse off 시간동안에는 양의 전압을 인가하여 증착된 박막에 양이온을 입사시켜 에너지 전달에 의한 박막의 특성을 향상시키고 자한다. MSS에 인가되는 전압과 주파수, 그리고 펄스폭을 변화시키며 전압과 전류, 그리고 기판에 입사하는 이온에너지 특성을 관찰하였다. 또한 MSS를 이용하여 티타늄(Ti), 탄소(C), 알루미늄이 도핑된 산화아연(AZO) 박막을 증착하였다. 증착된 박막은 a-step, SEM, XRD, AFM, 4 point probe를 이용하여 박막의 두께, 결정성장면, 표면 거칠기, 비저항 등을 분석하였다. Ti 박막에서는 기판에 입사되는 양이온의 에너지가 증가함에 따라 결정 방위면이 (002)에서 (001)로 변화함을 확인하였고 탄소 박막과 AZO 박막의 경우에는 기판에 입사되는 양이온의 에너지 변화에 따라 박막의 전도도를 조절할 수 있음을 확인하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.791-795
• /
• 1994

In this paper, the echo phenomena of Yingying Pagoda(ancient Chinese architecture), which may be resulted from interferences of reflection and diffraction by the pagoda eaves when pulse sound source is at some suitable positions, are investigated by an 1:2 scale model. There are valleys in frequency spectrum due to the interferences. On the other hand, taking eaves as wedges approximately, numerical spectral estimates are obtained from the closed-form impulse solution for diffraction of pulse point-source radiation by an infinite rigid wedge. The results of the numerical computations are similar to those of the model experiments. The study is a helpful guide to reconstruction or maintenance of this kind of ancient buildings.

• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.291-296
• /
• 2022

Capacitor is one of the reliability-critical components in power converters. The lifetime of the capacitor decreases as the operating temperature increases, and power losses caused by capacitor current are the main cause of the capacitor temperature increase. Therefore, various studies are being conducted to improve the lifetime of the capacitor by reducing the current of DC-link capacitors. In this study, pulse width modulation methods proposed for improving the lifetime of DC-link capacitors of the three-level NPC inverter are comparatively analyzed. The lifetime evaluation of the DC-link capacitor under different modulation methods is performed at component level first and then system level by considering all capacitors by applying Monte Carlo simulation. Furthermore, their effects on the efficiency and THD of the output current are also considered.