• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.138-144
• /
• 2016

The discharge characteristics of pulse-driven coplanar micro barrier discharges for an ultraviolet (UV) light source using Ne-Xe mixture have been investigated using a two-dimensional fluid simulation at near-atmospheric pressure. The densities of electrons, the radiative excited states, the metastable excited states, and the power loss are investigated with the variations of gas pressure and the gap distance. With a fixed gap distance, the number of the radiative states $Xe^*(^3P_1)$ increases with the increasing driving voltage, but this number shows weak dependency on the gas when that pressure is over 400 Torr. However, the number of the radiative states increases with the increase of the gap distance at a fixed voltage, while the power loss decreases. Therefore, a long gap discharge has higher efficiency for UV generation than does a short gap discharge. A slight change in the electrode tilt angle enhances the number of radiative species 2 or 3 times with the same operation conditions. Therefore, the intensity and efficiency of the UV light source can be controlled independently by changing the gap distance and the electrode structure.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.78-80
• /
• 2018

본 논문은 용량성 결합 플라즈마 응용 시스템을 위한 전류형 토폴로지 기반의 전력 변환장치 구조를 제안한다. 제안된 시스템은 독립적으로 제어된 두 개의 고 정밀 펄스 전류를 부하로 출력하는 병렬 연결된 전류형 전력 변환장치로 구성된다. 전체 회로 토폴로지는 네 가지 세부 부분; 바이어스 전류 발생기, 바이어스 전류 모듈레이터, 슬롭 전류 발생기, 슬롭 전류 모듈레이터로 구성되어 있다. 제안된 시스템은 빠른 과도 특성을 위해 1200V/90A급 SiC MOSFET 스위치를 사용하였다. 제안된 전력 변환장치는 4.5kV의 출력전압, 40A급 출력전류와 100ns급 전류 상승/하강 특성을 충족시키도록 설계되었다. 본 연구는 펄스 전류형 전력 변환회로를 제안함으로써 전압형 전력 변환장치에 비해 전압 스파이크 및 전압 파형 왜곡을 줄여 보다 정확한 출력 전압을 발생시킴으로써 용량성 결합 플라즈마 시스템의 안정도 및 정밀도를 향상시킬 수 있다.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.48-52
• /
• 2009

Micro-hole targets are studied to generate energetic protons from laser-thin foil targets by using 2-dimensional particle-in-cell simulations. By using a small hole, the maximum energy of the accelerated proton is increased to 4 times higher than that from a simple planar target. The main proton acceleration mechanism of the hole-targets is the electrostatic field created between the fast electrons accelerated by the laser pulse ponderomotive force combined with the vacuum heating and the target rear surface. But in this case, the proton angular distribution shows double-peak shape, which means poor collimation and low current density. By using a small cone-shaped hole, the maximum proton energy is increased 3 times higher than that from a simple planar target. Furthermore, the angular distribution of the accelerated protons shows good collimation.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권8호
• /
• pp.407-414
• /
• 2004

In this paper, a new gray scale expression method that divides the scan lines into multiple blocks is suggested. The proposed method can drive 16 sub-fields per 1 TV field in the panel with XGA ($1366{\times}768$) resolution. The on and off states of even subfields depend on the condition of odd subfields. The write address mode is used in the odd subfields, while the erase address mode is used in the even subfields. Because the ramp reset pulse is applied every 2 sub-fields, both the contrast ratio and the dynamic voltage margin are sufficiently obtained in comparison with previous AWD (Address While Display) methods. In realizing 16 subfields, shortening the scan time in the erase address period was important. The X bias voltage in the erase address period affected the minimum address voltage but did not the delay time of the address discharge. The delay time of the address discharge was affected by the address voltage and the time interval between the last sustain discharge and the scanning time. We also evaluated the dynamic false contour. New method shows an improved image quality in horizontal moving, but discontinuous lines were observed at the boundaries of each block in vertical moving

• 전기학회논문지
• /
• 제66권1호
• /
• pp.55-60
• /
• 2017

Capacitor Charging Power Supply(CCPS) is one of the most important components of a pulsed power system. The CCPS is widely used in source of lasers, accelerators and plasma generators. This paper presents design of a dead time control circuit and operation characteristics for stable high repetition rate of high voltage CCPS. The CCPS consists of battery, high voltage transformer and controller with a dead time control circuit. A dead time control circuit was simulated by PSpice. The performance test of the CCPS was carried out with a 7[nF] load capacitor at output voltage of 50[kV] and a pulse repetition frequency of 100[Hz]. As a result, we can verify that charging and discharging waveform is stable at 100[Hz]. The experiment results indicate that 3[ms] dead time made it possible for stable high repetition rate of 100[Hz]. This paper paves the way for designing an advanced CCPS which is more applicable outside experiments.

• 한국군사과학기술학회지
• /
• 제7권1호
• /
• pp.34-46
• /
• 2004

Copper films were prepared by using ECR-MOCVD(Electron Cyclotron Resonance Metal Organic Chemical Vapor Deposition) coupled with a DC bias system. The DC bias is connected to the electrode which placed 1∼3cm above the polymer substrate. The pulse electrical field around the electrode attracts the positive charged copper ions generated from the dissociation of copper precursor, $Cu(hfac)_2$, under ECR plasma. Condensation of supersaturated copper ions in the space between the electrode and substrate, makes it possible to deposit copper film on the polymer substrate even at room temperature. In this study, optimization of the electrode configuration was carried out in order to obtain the uniform films. The uniformity of the deposited films were closely related to the parameters of electrode geometry such as electrode shape, thickness, grid size and the spacing between electrodes. The most uniform copper film was observed with the electrode that enabled uniform electrical field distribution across the whole dimension of electrode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1406-1407
• /
• 2007

본 논문에서 제안한 ac-PDP(Plasma display panel) 셀구조는 Long gap의 전극 사이에 보조 전극을 삽입한 구조이다. 일반적으로, long gap 구조를 가진 PDP cell은 높은 방전 개시 전압을 가지므로, Long gap 전극 사이에 보조전극을 삽입하여 방전 개시 전압을 낮춤과 동시에 휘도 상승, 소비 전력의 감소효과로 발광효율의 향상을 가져왔다. 제안한 구조의 구동을 위하여 asymmetric mode와 long gap mode라는 2가지 파형을 가지고 실험하였다. 두 파형은 공통적으로 기존의 ADS(Address and Display period Separated)파형을 Y(Scan), Z(Common), A(Address) 전극에 인가하였으며, 보조적극에는 Z(Common) 전극의 파형을 수정한 형태로 인가하였다. Asymmetric mode는 보조전극에 Z(Common) 전극에 인가되는 파형과 같은 형태의 파형을 인가하여 Long gap의 구조를 가지지만 Short gap에서 방전이 가능하도록 설계하였고, long gap mode는 보조전극에 인가되는 Z(Common) 파형 중 sustain pulse를 초기 3개만을 주어 Short gap에서 방전을 개시함과 동시에 priming 입자를 생성하고, 나머지 sustain 구간에서는 floating시켜 이미 생성된 priming 입자를 long gap에서 구동을 가능하도록 하였다.

• Childhood Kidney Diseases
• /
• 제14권1호
• /
• pp.10-21
• /
• 2010

헤노흐-쇤라인 자반증의 전반적인 예후는 양호하나 심한 신염의 경우 말기신부전으로 진행될 위험이 높다. 최근 연구는 심한 헤노흐-쇤라인 자반증 신염을 가진 소아에서 조기 치료의 중요성을 강조하고 있으나 심한 자반증 신염의 치료는 맹검 대조 연구가 드물어 여전히 논쟁의 여지가 있다. 그럼에도, 정맥 고용량 메틸프레드니솔론 충격요법, 면역억제/세포독성 약제, 섬유소용해 치료, 항응고제, 항혈소판제, 혈장교환술같은 여러 강력한 치료가 심한 자반증 신염을 가진 소아에서 사용되어 왔다. 이 종설에서는 심한 자반증 신염을 가진 소아의 치료를 중점적으로 기술하였다.

• 한국레이저가공학회지
• /
• 제14권4호
• /
• pp.21-27
• /
• 2011

In this work, we have studied on time-resolved transient reflective image of single crystalline Si surface after single-shot fs-laser irradiation with varying the laser fluence under two different laser spot sizes. The temporal profiles of transient reflectivity changes as well as its maximum values at the early delay time were found to be strongly dependent on both the laser beam spot size and laser fluence. We have interpreted the dependence of transient reflectivity changes on the laser spot size in terms of a relaxation of the generated free carriers to the bulk silicon, which should be interacted with the plasma.

• Bulletin of the Korean Chemical Society
• /
• 제19권8호
• /
• pp.830-835
• /
• 1998

The characteristics of the ablation plume generated by 532 nm Nd: YAG laser irradiation of a Pb(Zr0.52Ti0.48)O3 (PZT) target have been investigated using a pulsed-field time-of-flight mass spectrometer (TOFMS). The relative abundance of O+, Ti+, Zr+, Pb+, TiO+, and ZrO+ ions has been measured and discussed. TiO+ and ZrO+ ions were also found to be particularly stable within the laser ablation plasma with respect to PbO+ species. The behavior of the temporal distributions of each ionic species was studied as a function of the delay time between the laser shot and the ion extraction pulse. The most probable velocity of each ablated ion is estimated to be Vmp=1.1-1.6x 105 cm/s at a laser fluence of 1.2 J/cm2, which is typically employed for the thin film deposition of PZT. The TOF distribution of Ti+ and Zr+ ions shows a trimodal distribution with one fast and two slow velocity components. The fast velocity component (6.8x 10' cm/s) appears to consist of directly ablated species via nonthermal process. The second component, originated from the thermal evaporation process, has a characteristic velocity of 1.4-1.6 x 105 cm/s. The slowest component (1.2 x 105 cm/s) is composed of a dissociation product formed from the corresponding oxide ion.