• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.6
• /
• pp.696-702
• /
• 2012

In this study, a noncontact laser ultrasonic system is proposed for rail defect detection. An Nd-Yag pulse laser is used for generation of ultrasonic waves, and the corresponding ultrasonic responses are measured by a laser Doppler vibrometer. For the detection of rail surface damages, the shape of the excitation laser beam is transformed into a line. On the other hand, a point source laser beam is used for the inspection of defects inside a rail head. Then, the interactions of propagating ultrasonic waves with defects are examined using actual rail specimens. Amplitude attenuation was mainly observed for a surface crack, and reflections were most noticeable from an internal damage. Finally, opportunities and challenges associated with real-time rail inspection from a high-speed train are discussed.

• Journal of the Korean Institute of Navigation
• /
• v.3 no.2
• /
• pp.21-30
• /
• 1979

Echo sounder and Doppler sonar are to theultra-sonic transducers for measuring the depth and the ship's speed respectively. To measure the depth and speed with a single transducer, it is required to control the ultra-sonic beam to optional direction. In the past, the direction of the transducer itself is varied, but such a method provoked much problems in the mechanical design of the equipment. This paper deals with the method to control beam direciton by the phase control of the plural arrangement of transducers, and the results are studied by a computer simulation. The remarkable results of the study is condensed as follows; 1. The greater the interval of arrangement between transducers, the sharper the radiation pattern is, but in this case, the level of undesired sidelobe is also increased. 2. The control of radiation pattern up to 60 degree can be achieved by an adequate arrangement of more than 10 transducers. 3. It is shown that a simultaneous measurement of both depth and speed can be achieved by alternating directivity of the pulse by the method proposed in this paper.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3E
• /
• pp.24-31
• /
• 1997

A mobile propagation characteristics for wideband DS-SS (Direct Sequence-Spectrum) signal is presented. Existing narrowband model is extended for the wideband pulse with an arbitrary shape. The received DS-SS signal in the frequency domain is the transfer function of the propagation channel weighted by the inverse Fourier transform. In this proposed method, received signal spectral density, instantaneous waveform, and Doppler spectrum of DS-SS signal via either Rayleigh of Rician channel can be obtained easily. Simulation results match well with both simulated theoretical fading statistics and classical theory. As expected, the extraction of chip timing in Rician fading shown to be more tractable than Rayleigh fading.

• Journal of Chest Surgery
• /
• v.26 no.10
• /
• pp.808-811
• /
• 1993

Leriche syndrome ia a common entity which causes ischemia of the lower extremities. Since the introduction of aortic resection and homograft replacement by Oudot in 1951, reconstructive procedures to restore distal blood flow by either endarterectomy or, later, with prosthetic graft have become standardized. Recently we experienced a case of Leriche syndrome. A 50 year-old male patient admitted with intermittent claudication, impotence, and symmetrical atrophy at lower extremities. Aortogram revealed complete obstruction at infrarenal abdominal aorta and Doppler sonogram revealed only minimal blood flow at left femoral artery.Successful surgical treatment was accomplished with endarterectomy at proximal left renal artery and a bypass from abdominal aorta at the level of both renal arteries to both external iliac arteries with bifurcated Gore-tex vascular graft. After bypass operation, we did palpate with arterial pulse at both popliteal artery.He was recovered without complication.

• Journal of the korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.7-16
• /
• 1979

Laser는 공간적 시간적 가간섭성이 매우 우수하며 단색성, 고출력, 단시간 Pulse등의 특성을 지 니고 있어서 각종의 계측, 통신, 가공, 정보처리, 의료, 농학 등의 다방면에 널리 응용되고 있으나 여기서는 Laser유족계에 대하여 설명하였다. 특히 지금까지 측정불가능하였던 연소현상에 대 해서도 LDV를 활용하여 좋은 연구결과를 얻을 수 있었으나 아직도 연소현상에 대한 LDV의 응용은 정치 Burner화염에 한정되어 있으며 앞으로도 많은 발전의 여지가 있는 부분이다. 그 중에서도 밀폐연소실내에서의 화염면전후의 유속계측, 전화화염의 화염전파속도, 연소속도 등에 관한 연구, 그리고 과도적으로 변동하는 유속, 화염온도, 연소실내 압력의 동시계측에 의한 각종 상관관계연구 및 난류화염유속의 계측 등금후 LDV를 이용한 실험의 발전이 매우 기대되는 바이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1990-1997
• /
• 1998

It is very essential to remove a strong ground clutter and moving clutter for an extraction of accurate information from a Doppler weather radar. Therefore, this paper proposed the use of an adaptive array antenna to overcome the shortages of a conventional weather radar. In the first, a simulation method was suggested for the generation of clutter and weather signals. Using these data, the performance of a weather radar was analyzed under various conditions. It is shown that the quality of pulse-pair estimates was greatly improved from the simulation results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.720-725
• /
• 2000

A new ultrasonic pulse-echo technique was developed and described for vibration measurement of the suspension assembly in hard disk drives. The method is based upon the difference in magnitude of two consecutive reflection waves from a moving object(suspension), while the traditional ultrasonic vibrometer uses the phase shift of the reference wave and the reflection wave. A cone-shape delay line is designed to access the small structure. A simple mathematical model is presented and analyzed with experimental results to show the feasibility of the method. The advantages of this ultrasonic vibration measurement method are relatively high resolution, low cost, and ease of implementation comparing with the Laser Doppler vibrometer.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.319-325
• /
• 2011

Recently, collision avoidance systems are under development to reduce the traffic accidents and driver comfort for automotive radar. Pulse radar can detect their range and velocities of moving vehicles using range gate and FFT(Fast Fourier Transform) of the doppler frequency. We designed the real time DSP(Digital Signal Processing) based automotive UWB(Ultra Wideband) radar, and implemented DSP to detect the range and velocity within 100ms for real time system of the automotive UWB radar. We also measured the range and velocity of a moving vehicle using designed automotive UWB radar in a real road environment.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.250-253
• /
• 2024

This paper proposes a low-power waveform for a long-range air-to-air data link. In the case of an air-to-air data link, data communication is performed in the air and high Doppler shift may occur depending on the flight speed, so a waveform based on the non-coherent method is suitable. In addition, since it is mounted on an aircraft, it must have low power characteristics. This paper proposes a waveform that combines a modulation technique based on frequency modulation and pulse position modulation that can turn on/off the transmission signal. As a result of the performance analysis, it was shown that the performance was suitable for air-to-air operation while showing low power characteristics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.11-19
• /
• 2014

In recent SONAR (sound navigation and ranging) systems, wideband active SONAR systems has received more attention than narrowband SONAR systems due to the remarkable detection performance in terms of range resolution. However, the wideband SONAR systems usually requires a huge amount of computational burden in order to achieve their own superiority. To cope with this drawback of the wideband SONAR systems, this paper proposes a fast target detection and velocity estimation method using an extended replica in wideband hyperbolic frequency modulation active SONAR system. Computer simulation shows that the proposed method can be implemented by a highly reduced computational complexity with a little performance degradation in target detection and velocity estimation compared to the conventional filter bank method.