• Imaging Science in Dentistry
• /
• 제39권1호
• /
• pp.41-49
• /
• 2009

Purpose: To detect the progression of experimentally induced periapical lesions on periapical radiograph and cone beam computed tomograph (CBCT) by quantitative analysis. Materials and Methods: After the removal of coronal pulps from premolars of two Beagle dogs, the root canals of premolars were exposed to oral environment during one week and then sealed for 70 days. Digital periapical radiographs and CBCTs were taken at baseline and every 7 days for 77 days after pulp exposure. We examined occurrence and areas of periapical bone resorption. Three comparative groups of CBCT radiographs were prepared by average projection of thin slabs with different bucco-lingual thicknesses (0.1, 3.0, and 8.0 mm) using a 3D visualization software. Radiographic densities were compensated by image normalization. Digital images were processed with mathematical morphology operations. The radiographic density and morphological features of periapical lesions were compared among three groups of CBCT in different time points. Results: In the CBCT group with 0.1 mm thickness, radiographic density (p<0.05) and trabecular bone area (p<0.01) were significantly decreased at the fifth week. However, in the CBCT groups with 3 mm and 8 mm thickness and periapical radiographs, none of densitometric and morphological features showed any significant differences in different time points. Radiographic density of periapical lesion showed increasing tendency at the eleventh week after pulp exposure. Conclusion: Radiographic detection of periapical lesions was possible at the fifth week after pulp contamination by quantitative method and was affected by buccolingual bone thickness.

• 대한의생명과학회지
• /
• 제2권2호
• /
• pp.275-282
• /
• 1996

저자들은 마우스를 실험모델로 하여 간흡충의 항원을 투여 했을 때 비장조직에 대한 CD3, CD4 및 CD8 모노클로날 항체의 반응 여부를 알아보고자 하였다. 즉, 간흡충에 대한 세포면역학적인 특성을 규명고자 하였으며 특히 비장 조직에 대한 phenotype을 관찰한 결과 다음과 같은 결과를 얻었다. 간흡충의 조항원을 면역증강제와 함께 복강 투여한 다음 일정 기간 후에 비장조직을 Avidin-biotin complex 면역조직염색을 실시한 결과 CD3에서 강한 양성 반응을 나타냈고 CD4와 CD8에서는 약한 반응을 나타냈다. 조직부위를 보면 피막, 혈관, 임파관, 백수부위와 림프구 및 대식 세포의 세포막에서 양성반응을 보였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권11호
• /
• pp.1531-1535
• /
• 2002

It has been known that the sex of chicken cells can be most accurately identified by fluorescence in situ hybridization (FISH). However, the presently available FISH has not been widely used for sex identification, because the procedures for cell preparation and FISH itself are complicated and time-consuming. The present study was undertaken to test a rapid FISH procedure for sexing chicken. A FISH probe was simultaneously synthesized and labeled with digoxigenin by polymerase chain reaction (PCR) targeting a 416 bp segment of the 717 bp XhoI family fragment which is repeated over 10 thousand times exclusively in the W chromosome. Sexing by FISH was performed on cytological preparations of early embryos, adult lymphocytes and feather pulps of newly hatched chicks. The DNA probe hybridized to all types of uncultured interphase as well as metaphase female but not male cells that had been examined. Moreover, consistent with the known site of the XhoI family, the hybridization signal was localized to the pericentromeric region of the W chromosome. We, therefore, conclude that the present PCR-based FISH can be used as a rapid and reliable sex identification procedure for chicken.

• Journal of the Korean Wood Science and Technology
• /
• 제33권4호통권132호
• /
• pp.60-65
• /
• 2005

어저귀 한지의 발묵특성을 장 단섬유의 혼합비율에 따라 비교 검토하여 화선지로써의 적용 가능성을 검토하고자 하였다. 제조한 한지의 발묵특성을 검토한 결과, 인피펄프 단독으로 초지한 한지는 발묵상태가 매우 불량하여 화선지용으로는 적합하지 않은 것으로 나타났으며, 목질부 단독으로 초지한 한지의 발묵상태가 시판 화선지류보다도 훨씬 우수한 경향을 나타냈다. 강도적인 측면을 고려한다면 설포메틸 펄프화법으로 처리한 단섬유인 목질부 펄프를 60% 혼합한 어저귀 한지가 화선지용으로 적합하다고 사료된다. 펄프화 방법에 있어서도 설포메틸 펄프화법으로 초지한 한지의 발묵상태가 우수하였다. 이렇듯 한지의 발묵상태는 장섬유와 단섬유의 혼합량 및 지합과 밀접한 관련이 있다.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.47-60
• /
• 2006

This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

• 한국의류학회지
• /
• 제32권7호
• /
• pp.1095-1103
• /
• 2008

The effects of resin finish and dyeabilities of four kinds of Iyocell fabrics that were manufactured by four kinds of pulps were investigated. The dyeabilities of Iyocell fabrics were similar, but differed from cotton fabric. In early stage of 30 minutes, cotton fabric was shown higher dye exhaustion ratio than Iyocell fabrics, however after then cotton fabric did not increase dye exhaustion, Iyocell fabrics increased continuously. At last, the dye exhaustion ratio of Iyocell fabrics were about 75% and that of cotton fabric was 65%. Two kinds of experimental procedures were applied for Iyocell fabrics. One was what the fabrics were treated with resins and washed with cellulase, and then dyed with reactive dyes. The other procedure was the fabrics were dyed with reactive dyes, and then applied the resin treatments and cellulase washing. After fibrillation and washing the undyed Iyocell fabric and the Iyocell fabric that was dyed with C.I.Reactive Red 120, their weight loss ratios were 3.5% and 2.8%, respectively. Dyeing with reactive dyes caused the crosslinking between cellulose and dyes and the crosslinking decreased fibrillation. The weight loss by enzyme washing of Iyocell fabrics decreased by the glyoxal and melamine resin treatments. The reduction of weight loss can be caused by fibrillation decrease. Dyeing and resin treating can be showed the synergic effect on the reduction of fibrillation. The effect of glyoxal resin on the reduction of fibrillation was a little better than that of melamine resin.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.3-10
• /
• 2015

In this study, we evaluated properties of pulp treated with swelling agent and swelling concentration. We used swelling agent, such as NaOH, DMSO, urea. One of them, pulps treated with NaOH from 0 to 5% measured WRV, beating efficiency, crystallinity and aspect ratio. We identified that NaOH when freeness reaches 100mL CSF was the shortest, on the other hand, WRV didn't change. Because NaOH is good beating efficiency, when pulp treated with various concentration of NaOH from 0 to 5%, pulp treated 1% NaOH was best beating efficiency. However, WRV, crystalline structure and crystallinity didn't change. The more NaOH concentration increased, the more aspect ratio increased, but when NaOH concentration exceeds 3%, aspect ratio decreased. As a result, pulp treated with 1% NaOH was the greatest beating efficiency and WRV, chemical structure didn't change.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.22-33
• /
• 2012

This study was carried out to investigate the characteristics of the lining papers which had been separated from six pieces of paintings and calligraphic works of the 18th and the 20th century. A total 20 kinds of lining papers were examined on the physical properties, colors, fiber morphology, and color reactions. The grammage and thickness of lining papers which had been used hanging-scroll type works were higher than those of folder types. On the other hand, the grammage and thickness of the first layer lining papers which had been separated from silk ground works were lower than those of paper ground works. All kinds of lining papers were colored from yellow to yellowish red because of unbleaching and deterioration. Through the examination on fiber morphology and color reactions, lining papers were verified that all of those were made from paper mulberry bast fiber but the first layer of the Mukjukdo. The lining paper which of the first layer of the Mukjukdo was verified that it was made from mixture of paper mulberry, hemp, and spruce pulps.

• 펄프종이기술
• /
• 제29권1호
• /
• pp.52-61
• /
• 1997

This study was aimed to decrease AOX(Adsorbed Organic Halide Compounds) by applying bleaching methods of A(HNO$_3$ ＋ NaNO$_2$) and $D^{(H/L)}$(dual pH chlorine dioxide bleaching) to conventional OCEDED bleaching stages. And so we investigate the effects of NSA treatment and the influence of production rate of ion species in chlorine dioxide and pulp mixtures according to various pH as well as dual pH on pulp bleaching. Finally the effects of AOC_DED^{(H/L)}ED^{(H/L)}$ bleaching stage were investigated by measuring AOX, brightness, kappa number and viscosity of pulps. A stage was treated by using 4% $HNO_3$ and 0.05~2.0% $NaNO_2$ on pulp and $D^{(H/L)}$ stage was like that pulp mixed with chlorine dioxide solution was adjusted at pH 7.0 and reacted in pulp cosistency 3%, S~20min, $70^{\circ}C$, and then successively for 160~175min at pH 4.0. It was found that suitable $NaNO_2$ addition rate was at 0.6% where the brigtness of pulp was most higher and pulp viscosity was not decreased much. Chlorate ($CIO_3$) was decreased according to pH increase but chlorite($CIO_2$) was highly decreased according to pH increase. And chloride was slightly increased with pH increase. The applying of A and D^{(H/L)}$ bleaching stages to some various multiple bleaching stages ($AOC_DED^{(H/L)}/EopD^{(H/L)} etc.$) had good results that brightness was increased more 2~3% ISO than conventional method(OCEDEopD), but viscosity was dropped by only 1~2cps.

• Restorative Dentistry and Endodontics
• /
• 제14권2호
• /
• pp.77-97
• /
• 1989

The purpose of this study was to observe the effect of ${\beta}GP$ in the remaining dental pulp tissue after pulpotomy in the dogs' teeth. For vital pulpotomy, 72 dogs' teeth were used and class V cavities were prepared and the pulps were amputated. ZOE and Dycal (Caulk Co., USA) were placed over the amputated tissue and cavities were sealed with ZOE cement in the control group. In the experimental group, ${\beta}GP$, ${\beta}GP$-ZOE, ${\beta}GP$-Dycal were placed over the exposed pulp tissues respectively. Dogs were sacrificed after 1, 2 and 4 weeks following the operations and the teeth were decalcified in the nitric acid, sectioned and stained with HE for light microscopic examination. For electron microscopic examination, specimens were made after 2 and 4 weeks following the operation. A comparative microscopic examination revealed as follows. 1. The dentin bridge was formed continuously due to osteodentin in the ${\beta}GP$-Dycal group at the 2nd week, the dentin bridge composed of osteodentin and tubular dentin was observed at the 4th week. 2. Osteodentin formation was vigorously in the ${\beta}GP$-Dycal than in the Dycal group. 3. In the surface of osteodentin the osteodentinoblasts showing vivid synthetic activity were observed and the matrix vesicles were presented during calcification of osteoid dentin matrix. 4. The dentin bridge formation was not observed in ${\beta}GP$ group and ${\beta}GP$-ZOE group.