• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.3
• /
• pp.38-45
• /
• 1998

Soil and water contamination caused by the abundant use of agricultural chemicals including herbicides and fertilizers draws public concerns since these chemicals may pollute the agricultural lands as well as the food products grown on these lands. As a method to reduce the use of agricultural chemicals mulching with thin plastic film has been commonly practised for many years. Although use of the plastic film for mulching is very effective in preventing the growth of weed, it is almost impossible to remove all of the plastic film from the agricultural land and the remaining film eventually contaminates the soils. Therefore, it is very imperative to develop a mulching material that decomposes completely to prevent soil pollution problems and to enhance the competitive edge of domestic agriculture. Mulch papers are believed to have many positive characteristics in preventing problems caused by the plastic mulch film since it decomposes completely after use. However, the basis weight of mulch papers needs to be reduced to improve its handling properties and to reduce the raw material costs of pulps. In this paper the possibilities of using domestic old corrugated containers in producing mulch papers were examined. Also use of unbleached softwood kraft pulps and dry strength additives were exploited along with two-layered sheet forming technology in decreasing the basis weight of the mulch paper. Results showed that reduction of 20g/$m^2$ of basis weight of mulch paper was possible by the appropriate raw material selection and application of strength resin. To use the mulch papers in paddy fields, however, further research to improve its durability should be pursued.

• Laboraroty Animal Research
• /
• v.34 no.4
• /
• pp.166-175
• /
• 2018

Recombination activating gene-2 (RAG-2) plays a crucial role in the development of lymphocytes by mediating recombination of T cell receptors and immunoglobulins, and loss of RAG-2 causes severe combined immunodeficiency (SCID) in humans. Rag-2 knockout mice created using homologous recombination in ES cells have served as a valuable immunodeficient platform, but concerns have persisted on the specificity of Rag-2-related phenotypes in these animals due to the limitations associated with the genome engineering method used. To precisely investigate the function of Rag-2, we recently established a new Rag-2 knockout FVB mouse line ($Rag-2^{-/-}$) manifesting lymphopenia by employing a CRISPR/Cas9 system at Center for Mouse Models of Human Disease. In this study, we further characterized their phenotypes focusing on histopathological analysis of lymphoid organs. $Rag-2^{-/-}$ mice showed no abnormality in development compared to their WT littermates for 26 weeks. At necropsy, gross examination revealed significantly smaller spleens and thymuses in $Rag-2^{-/-}$ mice, while histopathological investigation revealed hypoplastic white pulps with intact red pulps in the spleen, severe atrophy of the thymic cortex and disappearance of follicles in lymph nodes. However, no perceivable change was observed in the bone marrow. Moreover, our analyses showed a specific reduction of lymphocytes with a complete loss of mature T cells and B cells in the lymphoid organs, while natural killer cells and splenic megakaryocytes were increased in $Rag-2^{-/-}$ mice. These findings indicate that our $Rag-2^{-/-}$ mice show systemic lymphopenia with the relevant histopathological changes in the lymphoid organs, suggesting them as an improved Rag-2-related immunodeficient model.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.2
• /
• pp.7-12
• /
• 2009

The effects of refining either SwBKP or HwBKP, and both of SwBKP and HwBKP on the physical properties of paper were investigated in order to elucidate if the non-conventional refining and blending method can be used for the optimizing the paper properties. The blending ratio of SwBKP and HwBKP was 15:85. The highest bulk was obtained with the refining of SwBKP only. Any differences of opacity were not observed in unfilled paper, while the highest opacity of PCC filled paper was obtained at same bulk when the only HwBKP was refined. However burst index and tensile index did not showed any differences in the relationship with bulk. Therefore this result can be applied to improve the opacity of paper without sacrificing of strength properties.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.1
• /
• pp.35-44
• /
• 1995

The study was carried out to investigate on the response of environmental sanitation problems in action of the volume based waste charge system in Seoul The responses from the 346 persons who dwelled in Seoul was stimulatively answered, this system was considered as a successful on 70.5% of total answers, but little portion(29.4 % ) of those was unknown on the mean of this system. And we knew that this system was need to the communication and education through the press media about this one. After the action of the volume based waste system, the volume of refuse discharged in a day was decreased 30 ∼40% than before. In the problems of environmental sanitation after this system, the number of sanitary insect( cockroach etc ) and rat was decreased, also the production of orders and dust caused by refuse was decreased in comparison with those before. This results were considered that the Separate Collection should be perfectly performed. In response, the regular envelope of refuse was serious problems, the improvement for this one was demanded. The kind of difficult refuse treated was waste rubbers> electric products > furniture> foodstuffs> bottles, cans> papers, pulps etc, and the next proposal for this system should be prepared. Conclusively, the volume based waste charge system should be remarkable system In terms of resources recycling as well as wastes reduction. Above all in order to conform this system the separate collection system should be systematically performed, the next improvable proposal of the detailed methods in this system should be prepared.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.8-16
• /
• 2001

To manufacture toilet tissue with ONP (old newspaper), the effect of fractionation fiber (R150, R100, R70 mesh) and bleaching(P, PY), blending (70/30) with MOW(mixed office wastepaper) or WL(white ledger) and the addition of softener on the optical and mechanical properties were studied. Considering the pulp yield, brightness and strengths, fibers of R100 mesh fraction were proper to be produced to toilet paper from ONP. This pulp showed the pulp yield of 76.8%, brightness of 50.2% ISO and tensile index of 21.1 Nm/g. By the bleach with P and PY stages, the brightness of the pulps increased up to 60.3% ISO and 61.8% ISO, respectively. When blended with MOW (57.3% ISO) or WL (76.2% ISO), the brightness of the former increased up to 58.5% ISO, the latter up to 63.6% ISO. The strengths of pulp blended with WL were higher than those of fractionated pulp from 100% ONP, however there was no difference in strengths between fractionated pulp and blended pulp wth MOW. While the addition of softener improved the softness of paper, but it decreased strengths of pulp and extended dispersing time in water.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.30-36
• /
• 2016

This study was conducted to investigate the influence of the changes in handsheet structure by beating, wet pressing and the addition of wood flour spacer on the water absorption and the moisture absorption properties. The higher beating treatment of BKP resulted in the denser structure of handsheet samples, which leaded to the lower water and moisture absorption. The wet pressing showed the similar effects by reducing the bulk of handsheets. In case of the handsheet samples with similar bulk structure made of different beaten pulps, the severer beating treatment increased the water absorption and the moisture absorption. The addition of the wood flour spacer resulted in the higher bulk following the higher water and moisture adsorption. Since the water and the moisture absorption properties of paper products could greatly affect on not only the product quality but also the process runnability, the control of the water response of paper product has been considered as very important technology. The results of this study might be useful for control of water and moisture absorption properties of paper products.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.59-66
• /
• 2013

Fillers have been used for printing paper to improve printability, sheet formation and optical properties and to reduce production costs by replacing expensive wood pulps. However, an increased filler content will decrease paper strength because filler particles interfere with fiber-fiber bonding. In order to increase filler content without sacrificing too much paper strength in high filler content papers, the surface of precipitated calcium carbonate (PCC) has been modified by adsorbing anionic polyacrylamide and cationic starch in series. The adsorbed polymer layers would enhance interactions between the filler surface and the fiber surface, improving internal bonding. It was found that the modified PCC increased paper strength at a given filler content compared to the coventional method. Negligible differences in optical properties and formation of paper, filler and fines retention and drainage on the wire section were observed between the modified and the conventional PCC. However, the decreased bulk of paper was observed when the modified PCC was used.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.1
• /
• pp.59-70
• /
• 1998

A steady-state molecular diffusion experiment was conducted to evaluate the water vapor proof properties of paper Handsheets prepared from unbleached Itraft pulps(UKP) and old newspapers(ONP) and four different types of polymer-laminated white duplex board were tested under appropriate standard conditions. The diffusivity was determined on the basis of the Fickean first law. Results obtained from this study can be summarized as follows ; 1. The diffusivity data for handsheets showed about $10^{-5}cm^2/min$. whereas polymer-laminated paperboards had remarkably improved water-vapor resistance with about $10^3 to 10^4$ times lower diffusivity : 2. Sheet basis weight, wet-swelling and sizing degree had little influence on the diffusivity of paper; 3 Linear relationship existed between sheet density and diffusivity, and, 4. Highly sfgnificant linear relationship could be observed between diffusivity and Darcy s gas permeability. Results indicate that diffusivity, an intrinsic property of paper, can provide a valuable information for precise evaluation and improved quality control of water-vapor proof properties of paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.23-30
• /
• 2011

Fillers have been used for papermaking in order to enhance the optical properties, to improve sheet formation, printability and dimensional stability and to reduce the furnish cost. However, filler particles in paper interfere with fiber-fiber bonding, resulting in decreased paper strength. In order to increase filler content in paper without sacrificing too much paper strength, dual addition technology of fillers was investigated. As a first step, the effects of thick stock addition of fillers on paper properties and papermaking process were elucidated. It was shown that thick stock addition of fillers could increase paper strength at a given filler content. No significant adverse effects on formation, drainage and filler retention were observed. However, bulk of paper was reduced with thick stock addition of fillers, which shall be resolved with regulating other factors such as the mixing ratio of pulps and type of fillers.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.235-241
• /
• 2011

Effects of thermal aging on color variations of various papers were evaluated. With thermal aging, most of papers showed a special trend in $a^*$-$b^*$ plane: $a^*$ (red-green) values of the samples were reduced at beginning and after a turning point it was increased while $b^*$ (blue-yellow) was kept increased (yellowing of paper). In case of filter paper which consists of chemical pulps, the changes in $a^*$ value was occurred late compared with other samples. In case of the copy paper with optical brightening agent, the turning point in $a^*$ was not observed while a constant increase in $b^*$ was observed. In case of color paper, no specific trends in $a^*$-$b^*$ were found.