• 펄프종이기술
• /
• 제38권3호
• /
• pp.47-60
• /
• 2006

This study was carried out to investigate the sheet formation properties of Morus Hanjis, made of bast and whole stalk pulps by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping. Two species of Morus, M. alba and M. lhou, were used. Effect of morphological properties of pulp stocks on the sheet formation and its gray levels based on optical property were evaluated using an Image analyzer. In addition, the effect of fiber distribution index(FDI) which was calculated from tile data of Confocal laser scanning microscopy(CLSM) on the sheet formation and optical properties of Morus Hanji were also discussed. On the sheet formation, Hanji from whole stalk pulp was superior than that of bast pulp. The more the sheet formation improved, the more paper opacity decreased. In the aspect of Hanji's surface characteristics analyzed by an Image analyzer, the average gray level and its standard deviation of Hanji from the whole stalk pulp were rather lower than those of bast pulp because of better sheet formation of the former. However, high brightness Hanji showed high value of gray level. The sheet formation and paper opacity were increased with the decrease of standard deviation of gray level. From these results, gray level measurement could be used to predict the paper opacity as well as sheet formation. Sheet formation of whole stalk Hanji and its FDI measured by CLSM were higher than those of bast fibers. In conclusion, the sheet formation and opacity of Hanji could be evaluated by standard deviation value of Hanji's gray level using an Image analyzer and by fiber distribution index using CLSM.

• Journal of the Korean Wood Science and Technology
• /
• 제29권4호
• /
• pp.103-110
• /
• 2001

목재 내 리그닌의 선택적 분해 특성을 지닌 백색부후균 중, Phanerochaete chrysosporium KCCM 34740 균주를 현사시나무 목재 칩에 전처리하여 bio-kraft pulping 적용 가능성을 실험적으로 평가하였다. 전처리 결과, 무처리 대조구에 비해 펄프의 정선수율은 전처리 10일에서 최고 약 2%의 증가를 보였으며, 전처리 기간의 증가에 따라 여수도의 감소, WRV의 증가 경향을 나타냈다. 또한 수초지의 물성 개선에도 효과가 있었으며, 주사전자현미경 관찰을 통하여 이러한 효과가 백색부후균의 생물고해 작용, 즉 펄프 섬유의 미세섬유화 및 다공질화에 기인한 것임을 확인할 수 있었다. 이러한 결과로써 향후 kraft 증해 약액 및 제지공정상의 고해 동력에너지의 소비를 절감할 수 있을 것으로 기대한다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권1호
• /
• pp.1-8
• /
• 2004

생장속도가 빨라서 단위면적당 Biomass의 생산량이 많은 어저귀(Indian mallow, Abutilon avicennae G.)를 원료로 하여 펄프화하였으며, 제조한 한지의 물리적·기계적·현미경적 특성에 관하여 비교 검토하였다. 제조한 한지의 특성을 살펴보면 광학적, 강도적, 현미경적인 특성에서 설포메틸 펄프화법이 우수한 결과를 나타냈고, 장섬유인 인피부 펄프에 대한 단섬유인 목질부 펄프의 혼입량 증가에 따른 변화에 있어 지질(밀도, 백색도, 불투명도, 지합)의 변화는 점차 증가했으나, 강도는 감소하는 경향을 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.123-132
• /
• 2012

Pre-pulping extracts were found to contain a dilute amount of xylo-oligosaccharides and acetic acid as the major components, and many minor components including other organic acids, lignin-derived phenolics, and sugar degradation products. Once separated from the pulp, a secondary hydrolysis step was required to hydrolyze oligomeric hemicellulose sugars into monomeric sugars before fermentation. The following study detailed the extent of hemicellulose recovery by pre-pulping using hot water extraction and characterized the hydrolysis of the extract with respect to comparing acid and enzymatic hydrolysis. The secondaryhydrolysis of hot water extracts made at an H-Factor of 800 was tested for a variety of acid and enzyme loading levels using the sulfuric acid and xylanases. The maximum fermentable sugar yield from acid and enzyme hydrolysis of the extract was 18.7 g/${\ell}$ and 17.7 g/${\ell}$ representing 84.6% and 80.1% of the maximum possible yield, respectively.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.74-80
• /
• 2005

The compositions of residual extractives in woodmeal, unbleached and oxygen-delignified aspen kraft pulps were investigated with gas chromatography(GC) and gas chromatography-mass spectrometry (GC-MS) with focus on fate of extractives in kraft pulping and oxygen delignification. Steryl esters and shorter retention time (shorter than palmitic acid) extractives were main extractives in aspen woodmeal. Shorter retention time extractives were well removed in kraft pulping. Sterol esters were hydrolyzed to sterols and fatty acids. Sterols and fatty acids were two major extractives classes in unbleached kraft pulps. Linoleic acid was main fatty acids in unbleached pulps compared with palmitic acid which is generally found in aspen woodmeal. Sterolsand fatty acids were also two major extractives classes in oxygen-delignified kraft pulps. However, linoleic acid was well removed in oxygen delignification.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.88-94
• /
• 2010

Cattail (Typha L.) was used as a raw material for producing both bio-ethanol and pulp for papermaking at the same time. Pretreatments of cattail stems and leaves with acid ($H_2SO_4$) and alkali (NaOH) in three different addition levels were studied before soda pulping. The acid pretreatment gave reducing sugar of 15.2% of initial weight, but alkali pretreatment close to 1%. Soda pulping of the pretreated cattail gave 3% reduction in pulp yield and less bonding properties in paper; however, refining of the pulp from the pretreated cattail with alkali restored their fiber bondings up to that of the pulp from no-pretreated cattail at equivalent freeness.

• 보존과학회지
• /
• 제4권1호
• /
• pp.43-52
• /
• 1995

This study was carried out to investigate the papermaking characteristics for New Hanji (Korean Paper) products from paper mulberries by new pulping processes. So far wood ash extractives or NaOH only have been used for cooking chemicals at the atmospheric condition. Also bast fibers only have been used as raw materials for Hanji, In this study, as the alternatives to the conventional cooking, alkali, alkali-peroxide and sulfomethylated cookings were applied at the pressurized condition for Hanji pulping, Also bast fibers, woody parts and whole woods are attempting for being utilize as new raw materials for special Hanji. Anatomical and chemical properties of 3 paper mulberry species and their pulping characteristics were analyzed.

• Journal of Forest and Environmental Science
• /
• 제29권2호
• /
• pp.125-130
• /
• 2013

An attempt was made on pulp production from the fast growing plant, Acacia hybrid to determine the total yield, screened yield, Kappa number, and fibre morphology of organosolv Acacia hybrid pulp. Uniform-sized chips were taken to undergo pulping in a digester with five different concentrations of ethanol, 50%, 60%, 70%, 80% and 90% (v/v) with 1 M of sodium hydroxide as catalyst. All chips were digested in a temperature-controlled digester with constant amount of water added and temperature of $185^{\circ}C$ with the duration of three hours cooking time and correspond pressure 1.1-1.2 MPa. It was observed that increasing of ethanol concentration has led to pulp yield increment and decreased in the degree of delignification at the same time. This study was aimed to focus on the effect of the varied concentration of organic solvent towards the pulp yield and its relationship with Kappa number and pulp yield.

• 펄프종이기술
• /
• 제37권5호통권113호
• /
• pp.35-40
• /
• 2005

We tried to synthesize the 2-methyl anthraquinone (2-MAQ) with reaction between phthalic anhydride and toluene instead of using 2-methyl phthalic anhydride and benzene. This process didn't generate significant of amount of 1-methyl anthraquinone (l-MAQ) as byproduct. The other advantage of this pathway is using less toxic toluene instead of benzene known as carcinogen. 2-MAQ synthesized this pathway was as effective as reagent grade from commercial available based on soda-anthraquinone(AQ) pulping results.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.24-32
• /
• 2004

Toner used in xerographic printing process is hydrophobic powder with low surface energy. The toner ink film fused on paper surface can be efficiently detached from a fiber surface during pulping, but it does not fragment again into fine toner particles. Ink agglomerates that result have too large particle size to be deinked by flotation. The purpose of this study is to enhance toner agglomeration using 1-octadecanol for improving the toner removal by screening. The effect of pH, pulping temperature, and 1-octadecanol on toner agglomeration and removal by screening was investigated using image analysis methods. Results showed that the size of toner agglomerates increased substantially when pulping was carried out at high temperature under acidic condition. When toner agglomerates showed spherical shape, the particle removal efficiency of screening was improved.