• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.71-76
• /
• 2009

This study was conducted to investigate the load acting on a tractor engine when it delivers the maximum power at drawbar. The results of the drawbar tests on the 5 locally-made and 14 imported tractors conducted at NIAE in 2004, and the 15 tractors tested at OECD test stations in foreign countries were analyzed and presented by the torque load ratio, defined as a ratio of the engine torque load caused by drawbar pull to its full-load capacity, as a function of pull speed. The NIAE test results showed that the torque load ratio increased from 20 to 80% with pull speed less than 5 km/h. At speeds faster than 5 km/h, it was 80${\sim}$110% regardless of the pull speed. However, the OECD test results showed that the torque load ratio was evaluated mostly to be 70${\sim}$90% in the entire pull speed range. The same trend was also shown for the maximum drawbar load. The difference in the torque load ratio may be attributable to bias-ply tires for locally-made and some imported tractors. It is also suggested that the input torque load may be increased safely up to 120% of the full load capacity of the tractor engine for an accelerated life test of tractor transmissions.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.327-331
• /
• 2006

This paper presents the analysis method for the torque characteristic of the 1-phase induction motor considering space harmonics in the air gap. The equivalent circuit method is used, where the circuit constants are obtained by classic theory. In addition, the space harmonic components in air gap magneto motive force are analyzed and added to the equivalent circuit to obtain accurate torque characteristics in low speed regions. Each torque component due to the harmonics is calculated and the total torque characteristic is obtained and compared with the measurement result.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.661-667
• /
• 2016

연약지반에 적용 가능한 앵커의 기술로 개발계획인 헬릭스 형태의 소형 앵커는 기존 앵커보다는 시공 단계가 단순하고 그라우트가 양생될 때까지 기다릴 필요가 없으므로 공기단축 및 연장 롯드 반복사용이 가능하며 비용 절감효과가 있다. 또한 배토가 없으며, 회전식으로 헬리컬 앵커를 삽입하기 때문에 시공성이 좋으며, 앵커의 제거도 설치만큼 쉬우므로 가시설의 제거용 앵커로도 활용 가능하며, 헬리컬 앵커 날개 수에 따라 인발저항이 달라, 효율적인 헬리컬 앵커 설계가 가능할 것으로 판단된다. 연약지반에 헬릭스 앵커를 시험시공하기 위하여 헬리컬 앵커와 토크드라이버를 제작하였으며 헬리컬 앵커를 삽입/인발하여 지지력을 산정하는 연구를 진행하였고 관입토크와 앵커의 인발력의 상관관계를 도출하였다. 대형토조를 활용하여 모형시험을 수행한 결과 지반이 단단할수록 회전관입 토크가 크게 측정되었으며 이에 따른 인발저항도 크게 나왔다. 이 연구에서 수행한 실험범위 내에서는 인발저항과 관입토크는 서로 비례관계에 있음을 알 수 있었다.