• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.274-280
• /
• 2004

Sorage modulus(G'), Impact and rebounding properties of polyurethane(PU), phylon(PH) and injection phylon(IP) foams were studied. The storage modulus of PU foam was dramatically increased with decreasing temperature. But the storage modulus(G') of IP and PH foams were not affected by temperature. The Impact force of PU foams was increased with decreasing temperature. But in the cases of IP and PH foams, the impact forces were not changed with temperature below $20^{\circ}C$. Impact farces of IP and PH foams were increased with the temperature above $20^{\circ}C$, but that of PU foam was not changed. Rebounding resilience of PU foam was lower than those of IP and PH foams from $-20^{\circ}C$ to $40^{\circ}C$.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.198-206
• /
• 2019

A new methodology to analyze the nuclear material accountability for pyroprocessing system is developed. The $Pu-to-^{244}Cm$ ratio quantification is one of the methods for Pu accountancy in pyroprocessing. However, an uncertainty in the $Pu-to-^{244}Cm$ ratio due to the non-uniform composition in used fuel assemblies can affect the accountancy of Pu. A random variable, LOPu, is developed to analyze the probability of detection for Pu diversion of hypothetical scenarios at a pyroprocessing facility considering the uncertainty in $Pu-to-^{244}Cm$ ratio estimation. The analysis is carried out by the hypothesis testing and the event tree method. The probability of detection for diversion of 8 kg Pu is found to be less than 95% if a large size granule consisting of small size particles gets sampled for measurements. To increase the probability of detection more than 95%, first, a new Material Balance Area (MBA) structure consisting of more number of Key Measurement Points (KMPs) is designed. This multiple KMP-measurement for the MBA shows the probability of detection for 8 kg Pu diversion is greater than 96%. Increasing the granule sample number from one to ten also shows the probability of detection is greater than 95% in the most ranges for granule and powder sizes.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3525-3534
• /
• 2023

Non-uniformity of Pu and Cm composition in used nuclear fuel was analyzed to determine its effect on Pu accountancy in pyroprocessing, while employing the Pu-to-²⁴⁴Cm ratio method. Burnup simulation of a typical pressurized water reactor fuel assembly, required for the analysis, was carried out using MCNP code. Used fuel nuclide composition, as a function of nine axial and two radial meshes, were evaluated. The axial variation of neutron flux and self-shielding effects were found to affect the uniformity of Pu and Cm compositions and in turn the Pu-to-²⁴⁴Cm ratio. However, the results of the study showed that these non-uniformities do not affect the use of Pu-to-²⁴⁴Cm ratio method for Pu accountancy, if the measurement samples are drawn from the voloxidized powder at the feed step of pyroprocessing. 'Material Unaccounted For' and its uncertainty estimates are also presented for a pyrprocessing facility to verify safeguards monitoring requirements of the IAEA.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.350-351
• /
• 2003

Polyurethane은 물리적, 화학적 성질이 매우 다른 두 segment(hard/soft)로 이루어진 block copolymer로서 hard segment의 화학적 구조가 hard segment의 packing정도에 영향을 미쳐, PU의 미세상분리 현상을 결정하며 결과적으로 PU의 물리적 성질에 큰 영향을 미치게 된다$^1$. 본 연구에서는 hard segment의 packing을 향상시켜 PU은 열적 기계적 특성을 향상시키기 위하여 방향족환으로 구성되어 있어 aromatic diol의 일종인 hydroxyquinone-di-(beta-hydroxyl)ether(HQEE)를 chain extender로 사용하여 PU를 합성하였다. (중략)

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.43-48
• /
• 2005

We present a high resolution spectrum of PU Vul observed at Bohyunsan Optical Astronomy Observatory (BOAO) on April 9, 2004. Permitted emission and nebular lines of PU Vul had been significantly changed compared to all spectra observed since its eruption in 1979. Therefore all new lines should be re-identified and were done so. We do-convoluted a $H{\beta}$ line into several emission components with Gaussian functions. Then we carefully discussed the geometrical feature of PU Vul in April 2004.

• 대한방사선방어학회:학술대회논문집
• /
• 2009.04a
• /
• pp.228-229
• /
• 2009

• Journal of Korean Library and Information Science Society
• /
• v.25
• /
• pp.143-166
• /
• 1996

Recently Orientalism becomes the center of public interest. So many books related to Cheon Pu Kyung(천부경) are published in Korea. But the present writer thinks that such literature doesn#t communicate us, as it is, the original meaning of Cheon Pu Kyung. Most specialists concentrate on not so much the original text interpretation as annotation in reference to Cheon Pu Kyung. If so, it is difficult for us to find out precisely the real intention of it. Consequently the present writer in the interpretation of Cheon Pu Kyung makes plans to carry out the real intention interpretation and annotation based on Cheon Pu Kyung interpretation of Seok-Kok(석곡) Lee, Kyu-Jun(이규준). Together, the contents on which this article is based on were investigated as follows: 1. words go into 2. the limit of the original text interpretation 3. why does it need the real intention interpretation of Cheon Pu Kyung 4. the interpretative limit of Cheon Pu Kyung literature 5. Cheon Pu Kyung interpretation of Seok-Kok(석곡) Lee, Kyu-Jun(이규준) 6. words go out.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.644-650
• /
• 2008

This study examined the effect of nanoclays on the shape memory behavior of polyurethane (PU) in fibrous form. A cation was introduced into the PU molecules to disperse the organo-nanoclay (MMT) into poly($\varepsilon$-caprolactone) (PCL)-based PU (PCL-PU). The MMT/PCL-PU nanocomposites were then spun into fibers through melt-processing. The shape memory performance of the spun fibers was examined using a variety of thermo-mechanical tests including a new method to determine the transition temperature of shape memory polymers. The MMTs showed an improved the fixity strain rate of the MMT /PCL- PU fibers but a slight decrease in their recovery strain rate. This was explained by the limited movement of PU molecules due to the presence of nanoclays. The shape memory performance of the MMT/PCL-PU fibers was not enhanced significantly by the nanoclays. However, their recovery power was improved significantly up to a strain of approximately 50%.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.45-54
• /
• 2014

This paper presents a lecture note of pu method for power system analysis. The author tries to help students in class better understand the fundamental of pu calculation using a very simple DC circuit. And a voltage drop calculation by pu method for a distribution system is given to help understand the importance of the vector reference in AC circuit analysis. A short current calculation by pu method for a power system with a generator, transformer and transmission line is also presented to show how pu calculation can be applied to real power systems, in which all the data are the ones currently being used by KEPCO and other industrial sites.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.627-630
• /
• 2014

The latest video coding standard, high efficiency video coding (HEVC) achieves high coding efficiency by employing a quadtree-based coding unit (CU) block partitioning structure which allows recursive splitting into four equally sized blocks. At each depth level, each CU is partitioned into variable sized blocks of prediction units (PUs). However, the determination of the best CU partition for each coding tree unit (CTU) and the best PU mode for each CU causes a dramatic increase in computational complexity. To reduce such computational complexity, we propose a fast PU decision algorithm that early terminates PU search. The proposed method skips the computation of R-D cost for certain PU modes in the current CU based on the best mode and the rate-distortion (RD) cost of the upper depth CU. Experimental results show that the proposed method reduces the computational complexity of HM12.0 to 18.1% with only 0.2% increases in BD-rate.