• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.711-717
• /
• 1998

BST(70/30) and BST(50/50) thin films were prepared by Sol-Gel method and studied about the microstructural and dielectric properties with Pt and ITO bottom electrodes. The stock solution was synthesized and spin coated on the Pt/Ti$SiO_2$/Si and Indium Tin Oxide(ITO)/ glass substrate. the coated films were dries at 350$^{\circ}C$ for 10 minutes and annealed at $750^{\circ}C$ for 1 hour for the crystallization. The thin films coated on ITO substrate were crystallized easily and the packing density and roughness of surface were better that those of films coated on Pt substrates. In the BST(50/50) composition the structural properties were similar to the BST(70/30) composition and grain size were decreased with increasing the contents of Sr. The dielectric constant was higher in the BST(50/50) composition compared with the BST(70/30) composition. Using the ITO substrate, the dielectric constant was higher than the Pt substrate while the dielectric loss was showed a reverse trend. The dielectric constant with and increase of temperature was decreased slowly.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.34-35
• /
• 2008

We investigated the effects of Pt nano electrodeposits on the corrosion of carbon substrate in an acidic solution. The electrodes for experiments were prepared by electrodepositing Pt on carbon substrate in a solution of 5 mM $H_2PtCl_6$ and 0.5 M $H_2SO_4$ using pulse deposition technique. In cyclic voltammograms for the carbon electrodes with and without Pt nano electrodeposits, total anodic current including both currents from oxygen evolution reaction and carbon corrosion increased abruptly above a critical potential. In addition, the critical potential of the carbon electrodes with Pt nano electrodeposits was lower than that of bare carbon electrode. This phenomenon was more prominent at $75^{\circ}C$ than $25^{\circ}C$. In potentiostatic experiments, the current transients and the corresponding power spectral density increased with increasing the applied potential for the electrodes. Furthermore, the current transients for the carbon electrodes with Pt nano electrodeposits were much higher than those for the bare carbon substrate. This indicates that the corrosion of carbon substrate can be highly accelerated by Pt nano electrodeposits.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.300-305
• /
• 1998

Crystallinity and structual properties of the epitaxially grown Pt films on $Al_2O_3$(0001) substrate by rf magnetron sputtering at a substrate temperature of $600^{\circ}C$ were studied by using backscattering spectrometry (BS)/channeling and transmission electron microscopy (TEM) measurements. $MeV^4$He ion BS/channeling results showed that the channeling minimum yield of Pt film with a thickness of 3500$\AA$ was 4%. This indicates an excellent crystallinity of Pt film. When the thickness of Pt film was less than 200 $\AA$, the channeling minimum yield of Pt film increased sharply with the decrease in film thickness. The Pt layer on $Al_2O_3$(0001) substrate grew epitaxially to the direction of (111) with six-fold symmetry. Cross-sectional TEM images also showed that Pt film on $Al_2O_3$(0001) substrate consist of twinned domains to release the strain induced by the lattice mismatch and the surface roughness of the film increased at the twin boundaries where the strain was contcentrated.

• Journal of Industrial Technology
• /
• v.35
• /
• pp.89-94
• /
• 2015

Graphene is a carbon-based two dimensional honeycomb lattice with monoatomic thickness and has attracted much attention due to its superior mechanical, electronic, and physical properties. Here, we present a synthesis of high quality graphene on Pt substrate using a chemical vapor deposition (CVD). We optimized synthesis condition with various parameters such as synthesis temperature, time, and cooling rate. Based on the results, we concluded that graphene synthesis is driven by mainly carbon adsorption on surface rather than precipitation of carbon which is dominant in other metal substrate. In addition, Pt substrate can be repeatedly used several times with high quality graphene.

• Korean Journal of Materials Research
• /
• v.21 no.3
• /
• pp.156-160
• /
• 2011

FePt nanoparticles suspension was synthesized by reduction of platinum acetylacetonate and decomposition of iron pentacarbonyl in the presence of oleic acid and oleyl amine. FePt nanoparticles were coated on a substrate by convective assembly from the suspension. To prevent the coalescence during the annealing of FePt nanoparticles double convective coatings were tried. First convective coating was for silica particle assembly on a silicon substrate and second one was for FePt nanoparticles on the previously coated silica layers. It was observed by scanning electron microscopy (SEM) that FePt nanoparticles were dispersed on the silica particle surface. After annealing at $700^{\circ}C$ for 30 minutes under nitrogen atmosphere, FePt nanoparticles on silica particles were maintained in a dispersed state with slight increase of particle size. On the contrary, FePt nanoparticles that were directly coated on silicon substrate showed severe particle growth after annealing due to the close-packing of nanoparticles during assembly. The size variation during annealing was also verified by X-ray diffractometer (XRD). It was suggested that pre-coating, which offered solvent flux oppose to the capillary force between FePt nanoparticles, was an effective method to prevent coalescence of nano-sized particles under high temperature annealing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.1
• /
• pp.53-59
• /
• 2003

Using Platinum-silicide (PtSi) formed between silicon substrate and carbon film, we have improved the field emission of electrons from carbon films. Pt films were deposited on n-Si(100) substrates at room temperature by DC sputter technique. After deposition, these PtSi thin films were annealed at 400 ~ $600^{\circ}C$ in a vacuum chamber, and the carbon films were deposited on those Pt/Si substrates by laser ablation at room temperature. The field emission property of C/Pt/Si system is found to be better than that of C/Si system and it is showed that property was improved with increasing annealing temperature. The reasons why the field emission from carbon film was improved can be considered as follows, (1)the resistance of carbon films was decreased due to graphitization, (2)electric field concentration effectively occurred because the surface morphology of carbon film deposited on Pt/si substrates with rough surface, (3)it is showed that annealing induced reaction between Pt film and Si substrate, as a consequence that the interfacial resistance between Pt film and Si substrate was decreased.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.47-50
• /
• 2010

This work discusses a two-step electroless plating method for preparing a Pt thin film on p-type InGaAs substrate, which is defined as Pt I and Pt II. A thin Pt catalytic layer formed in Pt I bath on the substrate at $65^{\circ}C$. In the following Pt II bath, thick Pt films then easily grew on the sensitized layer on InGaAs previously formed in the Pt I bath. The growth of Pt film is strongly influenced by the plating temperature and pH value. To study the plating time effect, the plating of Pt II bath is 5 to 40 min at $80^{\circ}C$ after using Pt I bath at 50~$65^{\circ}C$ for 5min of pH 8~13. Pt film for ohmic contact to p-type InGaAs was successfully prepared by using the two-step Pt electroless plating.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.45-49
• /
• 2010

$Li_2PtO_3$ thin film electrodes, which might be possible candidate for the cathode materials for implantable batteries, were synthesized using an electrostatic spray deposition (ESD) technique onto a platinum foil substrate. Single phase $Li_2PtO_3$with a structure similar to layered $LiCoO_2$ structure were synthesized by spraying a precursor solution of $CH_3CO_2Li2H_2O$ in ethanol onto a Pt substrate at temperatures ranging from 200 to $400^{\circ}C$ followed by annealing at above $600^{\circ}C$. Lithium carbonate was the only major phase at temperatures up to $500^{\circ}C$. The X-ray diffraction (XRD) peaks of the Pt foil substrate and lithium carbonate disappeared at temperatures >$600^{\circ}C$. The volumetric capacity of the $Li_2PtO_3$ thin film synthesized using the ESD technique was approximately 817 mAh/$cm^3$, which exceeded that of $LiCoO_2$ (711 mAh/$cm^3$).

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.05a
• /
• pp.144-145
• /
• 2000

• Proceedings of the Korean Magnestics Society Conference
• /
• 2001.04a
• /
• pp.102-103
• /
• 2001