• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.85-91
• /
• 2011

Computational results with pseudoplastic fluid flows for fully developed non-Newtonian laminar flows have been obtained. Those consist of the product of friction factor and Modified Reynolds number and Nusselt numbers with respect to the shear rate parameter in an annular pipe. The numerical results of the product of friction factor and Reynolds numbers and the Nusselt numbers for both Newtonian region and the power law region were compared with previously published asymptotic results, respectively. In the present calculations, the product of friction factor and Newtonian Reynolds numbers for pseudoplastic fluid at power law region in annular pipe is 180% less than that for Newtonian fluid. For power law fluids with different power law flow indices, the difference of the product of friction factor and power law Reynolds number between previous and the present results at the power law region is within 0.20%. The solutions also show the effect of the shear rate parameter on the Nusselt number and about 11% increase of Nusselt number at the power region.

• 동력기계공학회지
• /
• 제13권2호
• /
• pp.30-35
• /
• 2009

Numerical Calculations for dimensionless pressure drop (friction factor times Reynolds number) have been obtained for fully developed laminar flow of MPL(Modified Power Law) fluid in isosceles triangle pipes. The solutions are valid for Pseudoplastic fluids over a wide range from Newtonian behavior at low shear rates through transition region to power law behavior at higher shear rates. The analysis identified a dimensionless shear rate parameter which for a given set of operating conditions specifies where in the shear rate range a particular system is operating, i.e., Newtonian, transition or power law region. The numerical calculation data of the dimensionless pressure drop for the Newtonian and power law regions are compared with previously published asymptotic results presenting within 0.16 % in Newtonian region and 2.98 % in power law region.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.273-280
• /
• 2016

In this paper, the peristaltic flow of Psedoplastic fluid with variable viscosity in an asymmetric channel is examined. The bionic effects by means of magnetohydrodynamics (MHD) are taken into account. The assumptions of long wave length and low Reynolds number are taken into account. The basic equations governing the flow are first reduced to a set of ordinary differential equation by using appropriate transformation for variables and then solve by using perturbation method. The effect of physical parameters on the pressure rise, velocity and pressure gradient are illustrated graphically. The trapping phenomenon is analyzed through stream lines. A suitable comparison has also been made as a limiting case of the considered problem.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.808-811
• /
• 2001

The rheological properties of exopolysaccharide(EPS-R) produced by marine bacteria Hahella chjuensis KCTC 2395 was investigated. EPS-R solution showed a characteristic non-Newtonian behavior fluid properties. In aqueose dispersions of EPS-R 1%, consistency index(K) and flow behavior index(n) were 1,410 cp and 0.73. EPS-R solution was pseudoplastic fluid by power-low model. Rheological propertie of EPS-R was found to be influenced by the concentration of salt, pH, temperature and ionic compounds.

• 한국식품위생안전성학회지
• /
• 제5권1호
• /
• pp.35-40
• /
• 1990

유산균이 생성하는 다당류에 관한 연구의 일환으로서 Str. themophilus 와 Lb. bulgaricus를 10% 환원탈지유와 12% 환원전지유에 배양하면서 다당류 생성에 따른 우유 배양액 점도의 경시적 변화 및 그의 유체역학적인 특성에 대하여 조사하였다. 1. Str. themophilus 510의 10% 탈지유 배양액의 의가소성 유체의 유동양식을 가장 강하게 나타냈다. 한편 14% 농도에서 가장 높은 점도의 경시적 변화 및 그의 유체역학적인 특성에 대하여 조사하였다. 1. 12% 전지유배양액의 경우 의가소성유체의 유동양식을 나타내지만 탈지유 배양액에 비해서 현저한 점도의 저하를 나타냈다. 1. Str. themophilus 510 배양액의 최대 점조도 계수와 최소 유동지수는 각각 43, 0.09 이며 Lb. bulgaricus는 35, 0.09이다.

• 산업기술연구
• /
• 제34권
• /
• pp.11-14
• /
• 2014

Viscosity and shear stress of the dental impression materials on commercial market(Imprint Garant LB(3M, U.S.A), EXAMIXFINE IT(GC, Japan), Vonflex S LB(Vericom, Korea), S-Silicone LB(Shinwon, Korea)) were measured with increasing shear rate from 50(1/sec) to 100(1/sec). The viscosity of EXAMIXFINE IT was decreased from 20,542(cP) to 14,684(cP), which is the shear thinning property of pseudoplastic as non-Newtonian fluid. Since the pseudoplastic property makes the impression material shear thinning and softly injected from cartridge, EXAMIXFINE IT might be popularly used in dentistry.

• 한국식품영양과학회지
• /
• 제29권2호
• /
• pp.198-203
• /
• 2000

A highly viscous biopolymer from Bacillus coagulans CE-74 was purified and its rheological properties were studied The rheological properties of biopolymers produced by Bacillus coagulans CE-74 were studied at the temperature ranges with 20~8$0^{\circ}C$, at the concentration of 0.5~4.0%, at the pH ranges from 3 to 1 and at the shear rate fo 7.34~73.38 sec-1. The apparent viscosity of biopolymer was decreased with increasing shear rate, and thereby biopolymer showed pseudoplastic characteristics. Biopolymer solution showed a characteristic of non-Newtonian fluid properties. At the concentration of 1%, the consistency index and the flow behavior index were shown at 2.64 poise. sec11 and 0.8571, respectively. All dispersions were pseudoplastic fluids described accurately by Herschel-Bulkley model. The change of the biopolymer viscosity on pH showed the highest value at the pH 7.0 and it showed lower at acidic conditon that at alkaline condition comparatively.

• 공업화학
• /
• 제8권4호
• /
• pp.640-644
• /
• 1997

석탄의 종류와 농도 및 CWM의 유동성을 증가시키기 위해 첨가되는 계면활성제와 전해질이 CWM의 유동특성에 미치는 영향을 조사하였다. 탄종에 따른 CWM의 점도는 O/C 비가 높을 수록 높게 나타났다. 또한 CWM은 항복응력을 갖는 비뉴톤유체의 특성을 나타내며, 항복응력은 농도가 증가함에 따라 선형적으로 증가하였다. 첨가제로 사용된 계면활성제에 따른 CWM의 유동특성은 첨가되는 계면활성제의 농도에 관계없이 n<1인 pseudoplastic의 특성을 나타내었다. 또한 전해질의 투입량이 증가할수록 n은 1로 접근하여 CWM이 뉴톤유체에 접근하는 것으로 나타났으며, 전해질을 0.05wt.% 이상 첨가하였을 때는 항복응력이 나타나지 않았다.

• 한국식품과학회지
• /
• 제22권6호
• /
• pp.646-650
• /
• 1990

마늘의 장기저장 및 새로운 향신료 개발의 일환으로 마늘을 착즙한 후 농축시켜 저장 및 중간 향신 소재화 하고자 하였으며, 그 연구의 일환으로 마늘 착즙 및 그 농축액의 rheological properties에 대해 연구하였다. 마늘 착즙 및 농축액의 흐름거동은 고형물 농도$50^{\circ}Brix$까지는 power-law model에 대체로 잘 적용되었으나 $60^{\circ}Brix$ 이상의 농도에서는 항복응력을 고려한 Herschel-Bulkley model이 더 적절한 것으로 여겨졌으며, 의가소성 유체(pseudoplastic fluid)의 특성을 나타내었다. 고형물 농도 $32{\sim}60^{\circ}Brix$, 온도 $15{\sim}65^{\circ}C$의 범위에서 유동지수는 $0.6130{\sim}0.9937$로 온도가 상승할 수록 증가하였으며, 이 때 점조도지수는 $3.1886{\sim}0.0041Pa\;s^n$였다. 마늘 착즙의 겉보기점도는 전단속도의 증가에 따라 직선적으로 감소하였으며 유동에 따른 활성화에너지는 $11,216{\sim}23,195\;kJ/kg\;mol$이었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.184-187
• /
• 2002

Compression molding was specifically developed for replacement of metal components with composites. As the mechanical properties of the products are dependent on the separation and orientation, it is important to research the fiber mat structure and molding conditions. In this study, the effects of the fiber mat structure(NP: 5, 10, 25punches/$\textrm{cm}^2$) and the mold closure speed($\dot{\textrm{h}}$=0.1, 1, 10mm/min) on the viscosity of composites were discussed. The composites is treated as a Non-Newtonian power-law fluid. The parallel-plate plastometer is used and the viscosity is obtained from the relationship between the compression load and the thickness of the specimen.