• 한국방재학회 논문집
• /
• 제6권3호
• /
• pp.29-35
• /
• 2006

교량의 지진응답해석시 단면의 비선형 거동특성에 따른 휨변형을 정밀하게 구현하기 위해 섬유요소를 이용한 해석이 수행되었다. 2주형 다주교각을 섬유요소로 모델링하여 지진하중에 대한 비선형 정적해석을 수행하였으며 소성힌지 영역에서의 파괴 메카니즘을 분석하였다. 비선형 정적해석으로 얻어진 하중-변위 곡선을 이용하여 역량스펙트럼 방법에 의한 지진응답해석을 수행되었다. 또한 교량 전체 시스템을 섬유요소를 이용하여 모델링하고 동일한 응답스펙트럼을 가지는 지진파를 입력하여 비선형 시간이력 해석을 수행되었으며 이는 역량스펙트럼 방법과 유사한 결과를 보인다.

• Steel and Composite Structures
• /
• 제52권2호
• /
• pp.217-236
• /
• 2024

The objective of this paper was to discuss the seismic performance of hybrid FRP-steel reinforced concrete shear wall with replaceable friction dampers at the feet of the wall. The hysteretic characteristics of five wall specimens were studied by pseudo-static loading tests. The results showed that the damage of the specimens was concentrated on the friction dampers, and the energy consumption capacity was increased while making up for the defect of low ductility of FRP reinforced wall specimens. And the repairability of the wall after earthquake was improved. Finally, a calculation method of initial stiffness of shear wall with replaceable dampers was proposed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.139-145
• /
• 2009

축소시스템은 반복적인 계산이 요구되는 문제에서 매우 유용하게 적용될 수 있는 해석 기법이다. 최근에는 영역분할 기법과의 연동을 통해 축소시스템의 효율성이 향상되었다. 그러나, 전체 도메인이 몇 개의 영역으로 분할될 때 구속조건이 부과되지않는 영역이 만들어지게 된다. 각 부영역의 축소시스템을 구축하기 위해서는 리츠벡터를 추출해야 하는데, 구속조건이 부과된 부영역에서는 일반적인 정적해석을 통해 가능하다. 그러나, 경계조건이 부과되지 않은 부영역에서는 리츠벡터 추출을 위해 의사역행렬을 이용해야 한다. 일반적으로, 의사역행렬의 사용은 상당한 계산시간과 전산자원을 필요로 하는 문제점이 있다. 본 연구에서는 이 문제점을 개선하기 위해 축소 의사역행렬 도입을 제안한다. 이 방법은 정적 축소방법을 기초로 축소 의사역행렬을 구축하여 축소된 리츠벡터 정보를 추출한 후, 변환관계를 이용하여 전체 리츠벡터 정보를 구하게 된다. 수치예제에서는 고유치 해석을 통해 제안방법의 신뢰성을 검증하고, 전체시스템 계산시간과 비교하여 그 효율성을 검증한다.

• 한국전산구조공학회논문집
• /
• 제22권2호
• /
• pp.173-179
• /
• 2009

축소시스템은 반복적인 계산이 요구되는 문제에서 매우 유용하게 적용될 수 있는 해석 기법이다. 최근에는 영역분할 기법과의 연동을 통해 축소시스템의 효율성이 향상되었다. 그러나 전체 도메인이 몇 개의 영역으로 분할될 때 구속조건이 부과되지 않는 영역이 만들어지게 된다. 각 부영역에서 축소시스템을 구축하기 위해서는 주자유도가 선정되어야 하고, 이를 위해서는 리츠벡터를 추출해야 한다. 리츠벡터 계산은 구속조건이 부과된 부영역에서는 일반적인 정적해석을 통해 가능하나, 경계조건이 부과되지 않은 부영역에서는 의사역행렬을 이용해야 한다. 일반적으로 의사역행렬의 사용은 상당한 계산시간과 전산자원을 필요로 하는 문제점이 있다. 본 연구에서는 이 문제점을 개선하기 위해 축소 의사역행렬 도입을 제안한다. 이 방법은 정적 축소방법을 기초로 축소 의사역행렬을 구축하여 축소된 리츠벡터 정보를 추출하고, 변환관계를 통해 전체 리츠벡터 정보를 구한다. 수치예제에서는 일반적인 의사역행렬 계산시간 및 고유치 해석 결과의 비교를 통해 제안방법의 효율성과 신뢰성을 검증한다.

• Geomechanics and Engineering
• /
• 제15권6호
• /
• pp.1193-1205
• /
• 2018

A footing located on slopes possess relatively lower bearing capacity as compared to the footing located on the level ground. The bearing capacity further reduces under seismic loading. The adverse effect of slope inclination and seismic loading on bearing capacity can be minimized by proving sufficient setback distance. Though few earlier studies considered setback distance in their analysis, the range of considered setback distance was very narrow. No study has explored the critical setback distance. An attempt has been made in the present study to comprehensively investigate the effect of setback distance on footing under seismic loading conditions. The pseudo-static method has been incorporated to study the influence of seismic loading. The rate of decrease in seismic bearing capacity with slope inclination become more evident with the increase in embedment depth of footing and angle of shearing resistance of soil. The increase in bearing capacity with setback distance relative to level ground reduces with slope inclination, soil density, embedment depth of footing and seismic acceleration. The critical value of setback distance is found to increase with slope inclination, embedment depth of footing and density of soil. The critical setback distance in seismic case is found to be more than those observed in the static case. The failure mechanisms of footing under seismic loading is presented in detail. The statistical analysis was also performed to develop three equations to predict the critical setback distance, seismic bearing capacity factor ($N_{{\gamma}qs}$) and change in seismic bearing capacity (BCR) with slope geometry, footing depth and seismic loading.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.187-195
• /
• 2023

Intensive rainfall during the summer season in Korea has triggered numerous devastating landslides outside of downtown in mountainous areas. The 2D slope stability analysis that is generally used for cut slopes and embankments is inadequate to model slope failure in mountainous areas. This paper presents a new 3D slope stability formulation using the global sliding vector in the limit equilibrium method, and it uses an ellipsoidal slip surface for static and quasi-static analyses. The slip surface's flexibility of the ellipsoid shape gives a lower FS than the spherical failure shape in the Fellenius, Bishop, and Janbu's simplified methods. The increasing sub-columns of each column tend to increase the FS and converge to a steady value. The symmetrical geometric conditions of the convex turning corners do not indicate symmetrical failure of the surface in 3D analysis. Pseudo-static analysis shows that the horizontal seismic force decreases the FS and increases the mass volume at the critical failure state. The stability index takes the FS and corresponding sliding mass into consideration to assess the potential risk of slope failure in complex mountainous terrain. It is a valuable parameter for selecting a vulnerable area and evaluating the overall risk of slope failure.

• Geomechanics and Engineering
• /
• 제9권4호
• /
• pp.427-445
• /
• 2015

By means of finite element numerical simulation and pseudo-static method, the shallow-buried bilateral bias twin-tube tunnel subject to horizontal and vertical seismic forces are researched. The research includes rupture angles, the failure mode of the tunnel and the distribution of surrounding rock relaxation pressure. And the analytical solution for surrounding rock relaxation pressure is derived. For such tunnels, their surrounding rock has sliding rupture planes that generally follow a "W" shape. The failure area is determined by the rupture angles. Research shows that for shallow-buried bilateral bias twin-tube tunnel under the action of seismic force, the load effect on the tunnel structure shall be studied based on the relaxation pressure induced by surrounding rock failure. The rupture angles between the left tube and the right tube are independent of the surface slope. For tunnels with surrounding rock of Grade IV, V and VI, which is of poor quality, the recommended reinforcement range for the rupture angles is provided when the seismic fortification intensity is VI, VII, VIII and IX respectively. This study is expected to provide theoretical support regarding the ground reinforcement range for the shallow-buried bilateral bias twin-tube tunnel under seismic force.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.147-154
• /
• 2001

In this study, comprehensive seismic performance analysis were performed for the concrete face rockfill dam(CFRD) designed seismic coefficient method(0. 10g). The static and pseudo-static FEM analysis, limited equilibrium method and dynamic FEM analysis were used for the dam safety analysis. The results of the seismic analysis were that the minimum factor of safety of down slope was 1.2 and horizontal displacement increased 8cm and vertical displacement increased 1.2cm at dam crest rather than those of static condition. The model dam did not show any serious tai lure in seismic stabi1ity for 0.13g. And much more research is still necessary in seismic safety of CFRD.

• 한국지진공학회논문집
• /
• 제21권2호
• /
• pp.77-85
• /
• 2017

Pseudo-static approach has been conventionally applied for the design of gravity quay walls. In this method, the decision to select an appropriate seismic coefficient ($k_h$) is an important one, since $k_h$ is a key variable for computing an equivalent pseudo-static inertia force. Nonetheless, there is no unified standard for defining $k_h$. Likewise, port structure designers in Korea have a difficulty in choosing an appropriate $k_h$ definition, as there are conflicts in how $k_h$ is defined between the existing seismic code of port structures and the proposed new one. In this research, various seismic design codes for port structures were analyzed to compare the definitions of the seismic coefficient. The results were used for the proposing a unified seismic coefficient definition. Further, two dynamic centrifuge tests were performed with different wall heights (5 m, 15 m) to clarify the reference point of peak acceleration used in determination of $k_h$ according to the wall height. Results from dynamic centrifuge experiments showed that correction factors for the peak ground acceleration considering both the wall height and allowable displacement are needed to calculate $k_h$.

• 한국지진공학회논문집
• /
• 제22권1호
• /
• pp.15-22
• /
• 2018

Pseudo-static approach has been conventionally applied for the design of gravity type quay walls. In this method, seismic coefficient ($k_h$), expressed in terms of acceleration due to gravity, is used to convert the real dynamic behavior to an equivalent pseudo-static inertial force for seismic analysis and design. Therefore, the calculation of an appropriate $k_h$ considering frequency characteristics of input earthquake is critical for representing the real dynamic behavior. However, the definitions of $k_h$, which is used for simplified analysis in Korea, focuses only on convenience that is easy to use, and the frequency characteristics of input earthquake are not reflected in the $k_h$ definitions. This paper evaluates the influences of the frequency characteristics of input earthquake on $k_h$ by initially reviewing the $k_h$ definitions in the existing codes of Japan for port structures and then by performing a series of dynamic centrifuge tests on caisson gravity quay walls of different earthquake input motions (Ofunato, Hachinohe). A review of the existing codes and guidelines has shown that the $k_h$ values are differently estimated according to the frequency characteristics of input earthquake. On the other hand, based on the centrifuge tests, it was found that the permanent displacements of wall are more induced when long-period-dominant earthquake is applied.