• 제목/요약/키워드: Proximal shape

검색결과 86건 처리시간 0.028초

돌가자미 Kareius bicoloratus의 정자형성과정 중 생식세포, Cyst 상피세포 및 간질세포의 미세구조 (Ultrastructure of Germ Cells, Cyst Epithelial Cells and Interstitial Cells during Spermatogenesis of the Stone Flounder, Kareius bicoloratus)

  • 전제천;정의영;양영철
    • 한국어류학회지
    • /
    • 제18권4호
    • /
    • pp.311-318
    • /
    • 2006
  • 한국 서해안에서 채집한 돌가자미 Kareius bicoloatus의 정자형성과정 중 생식세포, Cyst 상피세포 및 간질세포들의 미세구조를 전자현미경 관찰에 의해 조사하였다. 제1차 정모세포에서 연접사복합체(synaptonemal complex)들이 성숙분열 중 전기의 쌍사기에 출현하였다. 특히, 감수분열을 위한 테스토스테론 호르몬을 분비하는 세포로 알려진 간질세포(Leydig cell)들은 제1차 정모세포 및 정세포 가까이에서 뚜렷하게 출현하였다. 포상핵을 가지는 이들 간질세포들은 소엽 간 간질조직 내의 섬유모세포들에 의해 둘러싸여 출현하였다. 특히, 이들 세포들은 타원형 또는 구상의 미토콘드리아들을 가지는데, 미토콘드리아들은 관상 크리스테(cristae)를 갖는 것이 특징이다. 또한, 활면소포체와 여러 개의 공포들도 세포질 내에서 출현하였다. 성장 발달 중인 정소 내에서 정소소엽 간 간질조직에서 나타나는 잘 발달된 간질세포들(스테로이드호르몬분비세포)은 포상의 핵과 관상 크리스테를 갖는 미토콘드리아를 가지며, 활면소체를 갖는 형태적 특징을 보였다. 정자형성과정 중, 제1차, 제2차 정모세포들은 cyst 상피세포 (Sertoli cell)들에 인접하거나 부착하여 나타났다. cyst 상피세포들의 핵은 길게 신장된 타원형 또는 삼각형의 핵을 가지며 세포질 내에 여러 개의 미토콘드리아가 출현하였다. 성장 발달 중인 정소 내에서 제2차 정모세포들과 정세포 가까이에 위치한 cyst 상피세포의 세포질 내에는 지방적, 미토콘드리아 로제트(mitochondeial rosettes)들과 글리코겐 입자들이 나타났다. 특히, 후기 성장 중인 정소 내에서 cyst 상피세포의 세포질 내에는 미토콘드리아, 소포체, 작은 지방적 및 다량의 글리코겐입자들이 출현하였다. 정세포 발달(정자변태) 후기에 기부중심립이 핵막에 부착하며, 원위중심립은 편모의 기저체를 형성하고, 편모축사를 형성하였다. 정자 첨체는 다른 경골어류에서와 같이 첨체를 형성하지 않았다. 정자 두부의 길이는 대략 $3{\mu}m$ 정도이며, 미부길이는 약 $30{\mu}m$ 정도이다. 정자 미부편모의 축사(axoneme)는 주변에 9쌍의 주변이중미세관 (nine outer doublet microtubule)이 있고 중앙에 두 개의 중앙미세관(two centrial singlet microtubules)으로 구성되어 9+2구조를 나타내었다. 본 종의 정자는 체외수정 종들이 갖는 두 개의 axonemal lateral fin을 가진다. 본 연구에서 여러 단계의 생식세포들 가까이에서 출현하는 cyst 상피세포(Sertoli cell)들은 영양공급, 식세포작용, 스테로이드형성의 3가지 기능을 나타내었다. 특히, 정소 발달단계 중 퇴화 회복기에 출현하는 cyst 상피세포들의 핵은 배정 후에는 모양이 불규칙하게 나타나며, 식세포작용을 나타내는 여러 특징들이 cyst 상피세포의 세포질 내에서 나타나고 있어, cyst 상피세포들은 배정 후 방출되지 않은 생식세포들의 퇴화 흡수에 관여하는 것으로 추정된다.

제 3기 포항분지의 학전층과 두호층에서 산출된 거미불가사리 화석 (Cenozoic Brittle Stars (Ophiuroidea) from the Hagjeon Formation and the Duho Formation, Pohang Basin, Korea)

  • 성미나;공달용;이봉진;이성주
    • 자원환경지질
    • /
    • 제42권4호
    • /
    • pp.367-376
    • /
    • 2009
  • 신생대 제3기 포항분지의 두호층과 학전층으로부터 총 40점의 거미불가사리 화석을 채집하였다. 학전층에서 총 32개체, 두호층 8개체로 학전층에서 상대적으로 많은 개체가 발견되었다. 하지만 보존 상태는 오히려 두호층에서 더 완전한 보존 상태를 보이며 전체적으로 보존 상태가 불량하여 종 수준까지의 감정은 불가능하다. 즉, 대부분의 표본들은 분절된 형태로 발견되었고, 분류학상으로 중요한 중심판(disk)과 판(plate)등의 세부적인 구조는 나타나지 않는다. 따라서, 발견된 거미불가사리 화석은 중심판과 팔의 형태나 완절의 구조 등에 따라 크게 3개의 그룹으로 구분하였다. 그룹 1은 학전층에서 산출된 거미불가사리 화석들로 대부분 분절된 팔만이 보존되어 있고, 완판은 팔로부터 분리되어 완절이 드러나 있으며, 완극은 길고 곧게 뻗어 있으며, 촉수공(tentacle pores)이 보존된 특징을 갖는다. 그룹 2는 두 호층에서 산출된 표본들로(4 개체) 짧고 원뿔 형태의 완극을 가지며 완판이 잘 보존되어 있는 특징을 갖는다. 이 화석들은 측완판(lateral arm plates)이 복완판(ventral arm plates)이나 배완판(dorsal arm plates)에 비해 크기가 작다. 그룹 3은 외형은 희미하나 원형의 중심판이 뚜렷하게 보존되어 있는 것들로 두호층에서만 4개체가 발견되었다. 포항분지에서 발견된 거미불가사리 화석의 보존 특징과 각 지층의 이미 알려진 퇴적학적 조건 및 암상관계를 비교 검토해 본 결과 이들이 상호 연관성이 있음이 확인되었다. 즉 학전층에서 발견된 거미불가사리 화석들(그룹 1)은 상대적으로 보존상태가 불량한데, 이는 사암 또는 사질 이암이 우세한 역질 사암이 퇴적되었던 상대적으로 좀 더 고 에너지의 퇴적환경의 영향 때문으로 해석된다. 반면 두호층의 표본(그룹 2, 3)들은 개체 수는 적지만 상대적으로 완전한 보존 상태를 보이는데, 이는 세립질의 이암이 퇴적되는 상대적으로 저에너지 환경에서 재퇴적 및 이동 없이 퇴적되었기 때문으로 추정된다. 또한 학전층에서 거미불가사리 화석의 산출량이 더 높은 이유는 이들이 상대적으로 얕은 수심에 많이 모여 살았던 것으로 판단된다.

Nuclear Factor I-C 결손 생쥐에서 상아모세포의 형태학적 특징 (MORPHOLOGICAL CHARACTERISTICS OF ODONTOBLAST IN NFI-C KNOCK/OUT MICE)

  • 고승백;이창섭;이난영;이상호;김흥중;박주철
    • 대한소아치과학회지
    • /
    • 제33권2호
    • /
    • pp.181-191
    • /
    • 2006
  • NFI-C K/O 생쥐에서는 상아모세포의 분화과정에 이상이 초래되어 상아질 형성에 이상이 생기고 치근 형성이 불완전하게 이루어지는 것으로 알려져 있으나 이에 대한 명확한 기전은 잘 알려져 있지 않다. 상아모세포가 분화하여 정상적으로 상아질을 형성하기 위하여 핵과 세포질이 극성을 띠고 잘 조직화되어야 하며, 이 과정에는 다양한 세포사이 결합장치들이 중요한 역할을 하는 것으로 알려져 있다. 본 연구에서는 NFI-C K/O 생쥐에서 상아질 형성에 이상이 생기는 것이 상아모세포의 형태학적 변화와 세포사이 결합장치들이 기능을 하지 못한 결과에서 기인한 것인지 알아보기 위하여, NFI-C K/O 생쥐에서 발생한 비정상적인 상아모세포들을 광학 및 투과 전자현미경을 이용하여 형태학적으로 관찰하고, Zo-1과 occludin의 발현을 면역조직화학적으로 관찰하여 세포사이 결합장치들의 분포를 확인하여 다음과 같은 결과를 얻었다. 1. 광학현미경 소견에서 NFI-C K/O생쥐의 전치부 상아모세포는 세포 극성이 상실되고, 여러 층으로 배열되어 있었으며 상아질에 많은 세포들이 함입된 것과 같은 비정상적인 상아질의 소견을 나타냈다. 반면에 NFI-C K/O생쥐의 구치부 상아모세포는 치관부에서는 잘 조직화된 소견을 보였으나 치근 형성 부위 에서는 세포 배열이 불규칙해지고 세포 극성이 상실되었다. 2. 투과 전자현미경 소견에서 NFI-C K/O생쥐 전치부의 비정상적인 상아모세포는 둥근 형태로 세포 사이 간격이 넓으며 폐쇄연접과 같은 세포사이 결합장치들이 전혀 관찰되지 않았다. 3. ZO-1의 면역조직화학적 염색에서 NFI-C K/O생쥐의 전치부 법랑모세포의 근위부와 원위부에서 ZO-1이 강하게 발현되었으나 비정상적인 상아모세포에서는 ZO-1의 발현을 관찰할 수 없었다. 4. Occludin의 면역조직화학적 염색에서 정상 생쥐의 전치부 상아모세포에서는 occludin의 발현이 관찰되었으나 NFI-C K/O생쥐의 비정상적인 상아모세포에서는 occludin의 발현이 관찰되지 않았다. 이상의 결과를 종합하여 볼 때 NFI-C의 결손은 상아모세포의 분화 이상을 초래하고 비정상적으로 상아질을 형성하는 과정에 세포사이 결합장치의 상실과 같은 형태학적인 변화의 중요한 요소로 작용하는 것으로 생각된다.

  • PDF

임목(林木)의 배축(胚軸) 및 유경삽수발근(幼茎揷穗発根)의 해부학적(解剖学的) 연구(研究) (Anatomical Studies on Root Formation in Hypocotyl and Epicotyl Cuttings of Woody Plants)

  • 최만봉
    • 한국산림과학회지
    • /
    • 제52권1호
    • /
    • pp.1-30
    • /
    • 1981
  • 임업적(林業的)로 또는 조경적(造景的)으로 이용가치(利用価置)가 높은 24속(屬) 34종(種)의 목본식물(木本植物)을 대상(対象)으로 하여 배축(胚軸) 또는 유경삽수(幼茎揷穗) 발근현상(発根現象)을 해부학적(解剖学的)으로 관찰(觀察)하였다. 사용(使用)된 재료(材料)의 제반특성(諸般特性)과 각종(各種) 실험조건(実驗條件)들의 자세(仔細)한 내용(內容)은 Table 1과 같으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 배축(胚軸) 및 유경삽수(幼茎揷穗)의 횡단면상(橫断面上)에서 본 외형(外形)은 원형(圓型), 타원형(楕圓形) 및 부정형(不定形) 등(等)으로 삼대별(三大別) 할 수 있으며, 또한 부정형(不定形)은 원형(圓型)에 가까운 것, 타원형(楕圓形)에 가까운 것, 4각형(角形)에 가까운 것 그리고 삼각형(三角形)에 가까운 것 등(等)으로 구분(区分)할 수 있었다. 그리고 이들의 외형(外形)은 속간(属間)에는 현저(顕著)한 차이(差異)를 보이고 있으나, 동속내(同属內)의 종간(種間)에는 대체적(大体的)으로 유사(類似)한 경향이었으며, 속(属)에 따라 다르게 나타났다. 이것은 FAA액(液)에 고정(固定)시킨 조직(組織)에서 관찰(觀察)되는 사실(事実)에 입각(立却)한다. 2. 배축(胚軸) 및 유경삽수(幼茎揷穗)의 기부(基部) 횡단면(橫断面)에서 본 유관속(維管束)은 대부분(大部分) 병립유관속(並立維管束)으로서, 배열(排列)은 6 가지의 기본형(基本形)으로 종합(綜合)할 수 있었고, 속간(属間)에는 현저(顕著)한 차이(差異)를 나타내나 동속내(同属內)의 종간(種間)에는 대체(大体)로 유례(類例)한 경향(傾向)이었으며 간혹 예외(例外)도 있었다. 3. 공시수종(供試樹種)의 배축(胚軸) 및 유경삽수(幼茎揷穗)의 발근부위(発根部位)는 아래와 같이 6가지 부위(部位)로 종합(綜合)할 수 있다. 1) 유관속간유조직(維管束間柔組織) : 측백나무(Photo. 4), 천지백(5), 아기단풍나무(6), 단풍나무(7), 은단풍나무(8), 박태기나무(16), 싸리나무(24), 일본목련(28), 함박꽃나무(29), 예덕나무(30), 고추나무(46). 2) 형성층(形成層) 및 사부조직(篩部組織) : 편백(Photo. 1), 화백 2), 자귀나무(12), 회양목(13), 박태기나무(16), 사철나무(17), 벽오동(18), 배롱나무(22), 쥐똥나무(25), 버들쥐똥나무(26), 목련(27), 일본목련(28), 예덕나무(30), 뽕나무(31), 탱자나무(33), 가시나무(40), 찔레나무(44), 때죽나무(47), 쪽동백(48). 3) 제일차방사조직(第一次放射組織) : 사철나무(Photo. 17), 때죽나무(47). 4) 엽(葉) 적(跡) : 상수리나무(Photo. 37), 갈참나무(39). 5) 피층유조직(皮層柔組織) : 가중나무(Photo. 10) 6) 유합조직(癒合組織) : 밤나무(Photo. 15), 배롱나무(23), 갈참나무(39), 가시나무(41), 졸참나무(43). 4. 일반적(一般的) 경향(傾向)으로 배축삽수(胚軸揷穗)의 발근(発根)은 유관속간유조직(維管束間柔組織)으로 부터, 그리고 유경삽수(幼茎揷穗)의 발근(発根)은 엽적(葉跡)과 유합조직(癒合組織)으로 부터 근원기(根原基)가 각각(各各) 시원(始源)되었다. 그러나 특수(特殊)한 예(例)로서 가중나무 배축삽수(胚軸揷穗)에서는 피층유조직(皮層柔組織)으로부터 근원기(根原基)가 시원(始源)되었으며, 벽오동 배축삽수(胚軸揷穗)에서는 타수종(他樹種)에서의 일반적(一般的)인 양상(樣狀)과는 달리 유관속간(維管束間) 유조직(柔組織)과는 관계(関係)없이 유관속계(維管束系)의 목부외위(木部外圍)에 존재(存在)하는 사부유조직(篩部柔組織)으로 부터 근원기(根原基)가 기원(起源)됨을 볼 수 있었다. 5. 발근난이수종별(発根難易樹種別) 배축(胚軸) 및 유경삽수(幼茎揷穗)의 발근(発根)은 모두가 증류수(蒸溜水)를 채운 수관병내(水管甁內)에서 가능(可能)하였으나, 발근(発根)이 곤란(困難)한 수종(樹種)에 있어서는 대개 후막조직(厚膜組織)이나 사부섬유조직(篩部纖維組織) 등(等)이 발달(発達)하고 있어 발근(発根)이 늦어진듯 하며, 용이(容易)한 수종(樹種)에서는 그러한 조직(組織)이 없이 발근(発根)이 빨랐다. 그리고 발근난이수종간(発根難易樹種間)의 발근부위(発根部位)는 뚜렷하게 구분(区分)되지 않았고, 각수종별(各樹種別)로 다양(多樣)하였다. 6. 유관속(維管束)의 수(数)가 많은 수종(樹種)은 적은 수종(樹種)에 비(比)하여 대체(大体)로 발근(発根)이 늦었고, 배축(胚軸)의 유관속(維管束) 구조(構造)가 근계(根系)의 유관속체계(維管束体系)를 아직 탈피(脱皮)하지 않은 단계(段階)의 삽수(揷穗)에서는 완여(完余)히 정상적(正常的)인 줄기의 유관속체계(維管束体系)를 갖춘 것에 비(比)하여 발근(発根)이 빨랐다. 발근(発根)이 더 용이(容易)하였다는 사실(事実)은 이 경우 삽수하단조직(揷穗下端組織)이 근경전이부(根茎転移部)에 접근(接近)해 있었다는 가능성(可能性)을 암시(暗示) 할 수 있다. 7. 침활엽수(針濶葉樹) 공(共)히 배축(胚軸)을 삽수(揷穗)로 사용(使用)하였을 경우엔 성숙지(成熟枝)의 삽수(揷穗)와는 달리 대체(大体)로 유관속(維管束) 부근(附近)의 유조직(柔組織)이 근원기형성(根原基形成)의 주요(主要) 위치(位置)가 되며, 침활엽수간(針濶葉樹間)에 뚜렷한 구별(区別)이 어렵다. 8. 유경삽수(幼茎揷穗)에서는 엽적(葉跡)에서 인접(隣接)한 사부(篩部) 및 형성층세포(形成層細胞)들과 관련(関聯)하여 또는 유합조직(癒合組織)으로부터 근원기(根原基)가 형성(形成)되는 예(例)가 많으며, 배축삽수(胚軸揷穗)에서는 주(主)로 유관속간유조직(維管束間柔組織)이 근원기형성(根原基形成)의 주요위치(主要位置)가 되었다가 조직(組織)이 점차 발달(発達)되어감에 따라 그 위치(位置)가 유관속형성층(維管束形成層)으로 바꾸어져 간다.

  • PDF

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF