• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3735-3740
• /
• 2012

본 연구는 다양한 에너지 하비스팅 기술들 중 압전 기술과 전자기 유도 방식을 조합한 에너지 블록 구조를 개발하고 발전성능 평가를 수행한다. 본 연구의 목적은 개발된 에너지 하비스팅 블록의 주택 도시 분야 적용성을 평가하기 위한 것이다. 본 연구는 동적 특성을 분석하기 위하여 유한요소 해석을 실시하고, 실험실 규모의 다층 에너지 하비스터의 현 발전수준을 평가하여 제시하였다. 그 다음으로 증폭기술이 적용된 프로토타입의 특징을 설명하고 개발된 프로토 타입 모듈의 발전성능을 다각적으로 평가하여 제시하였다.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1084-1091
• /
• 2004

In automotive air handling system, mixing of air streams by the cooler and the heater affects the comfort of cabin room. In the present study, computer-aided analysis is done to improve the thermal comfort and for the optimal design of automotive HVAC system. The simulation software used was FLUENT, and complicate geometries were created by three dimensional CAD. Air flow volume, fir distribution rate and temperature controllability and temperature differences between upper and lower discharge air are analyzed through numerical simulation at vent, floor and defrost mode. Also, velocity vector of sirocco fan is investigated through the scroll housing. The velocity vector magnitude is larger at lower region of fan than that at any other regions. Recirculation and disturbance of air is relatively high near the cut-off edge in the scroll housing. By using the results of this study, the time for prototype production can be reduced and timely decisions can be made to determine initial design directions.

• 한국주거학회논문집
• /
• 제24권2호
• /
• pp.69-76
• /
• 2013

With people leaving the countryside to the cities as a result of industrialization and urbanization and drastic reduction of school children due to low birthrate, nationwide, total 3,438 schools have been shut down following the closed schools policy. Consequently, local governments have been active in selling, utilizing, and leasing the closed schools but there are still 466 closed schools that need to be addressed quickly. In addition to this phenomenon, aging population has become an important issue, and demand for elderly welfare facilities population is also increasing as a result. However, the supply of welfare services remains inadequate. This study was conducted in an attempt to solve both local and social problems at the same time, caused by the closing of schools and an aging population, through the use of closed schools as elderly welfare facilities, and suggests plans for per-unit space according to its type, and prototype, through research analysis of practical use, based on case studies. With the conclusions of both advantages and disadvantages, drawn from its type, we are hoping to be able to use this study by adapting its type, or mixing, according to one's needs.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.686-695
• /
• 1993

A flywheel-type, inclined axis chopper for small-area rice and livestock farmers, has been developed at IRRI Agricultural Engineering, The prototype is belt-driven by a 2.6kW engine and uses four angled blades rotating below a fixed counteredge. Manual feeding is facilitated by a convenient spout presenting the crop to the inclined blade housing and also suction created by the rotating blades . The distance between the rotating blades and the bottom of the housing determines the length of chops, set here for 25 cm. The unit would cost $200 without the engine. Tests with napier grass, corn stalks , and rice straw showed satisfactory performance within the acceptable clearance, speed and moisture content ranges of the material presented. Highest capacities were 1186, 1148 and 744kg/hr for napier grass, corn stalks and rice straw, respectively. Corn stalks required the highest power demand at 2.3kW engine would be adequate as power source. The chopper performance was comparable to higher cost commercial chippers in terms of capacity and specific energy.

• 건축역사연구
• /
• 제11권1호
• /
• pp.21-32
• /
• 2002

Until now, we have a great progress in computer hardwares and computer softwares. Many people think these days as the information time or information society. Even though, we make a great progress in the computer science, we can not regard this society as the information society, if we do not accept the development of computer in our real life. In order to provide desirable residential environment for the information - society, it is necessary to review previous housing projects from the Industrial - Revolution to these days. Thus this study deals with limits of modern housings. This research also suggests a new housing concept for the information - society by reinterpretation of the Korean traditional houses. Use of space in the Korean traditional houses was mostly interpreted by the concept of sexual discrimination from Confucianism. However it is suggested in this study, that An-Chae is a home space for providing privacy of family and Sarang - Chae is a social space for providing social activity. Thus it is found that the Korean traditional house has been used as office as well as home. In this view, it is suggested that Korean traditional houses be the prototype of future house as a business space and also as a home space. In this study, 3 types of housing for the information - society are suggested; flat type, tower type and skip floor type. these houses have two entrances independently for the home space and the social space. Therefore each space has no interference with each other. Then one can do his own at home efficiently. He does not have to go to his office in downtown. One can relieve traffic congestions in the city and reduce air contamination.

• 센서학회지
• /
• 제28권5호
• /
• pp.318-322
• /
• 2019

In shooting training, an impact point identification system that uses the impact wave of the bullet to check the impact point in the target plate has been recently used. Acoustic sensors used in these systems must be able to detect shock waves of high sound pressure levels and be both waterproof and dustproof for rainy weather and dusty environments, respectively. In this study, membranes with excellent waterproof, dustproof, and sound transmitting characteristics were selected through a characteristics test; a protection cap was installed to install the selected materials. After coupling the produced protection cap to the acoustic sensor housing, the sensitivity and phase characteristics of the acoustic sensor were checked. Through the waterproof and dustproof test, the performances of its sensitivity and phase characteristics were confirmed. Finally, the normal shockwave of a 5.56 mm diameter bullet was measured using a shockwave detection signal collecting plate equipped with a prototype of the acoustic sensor at a 100 m firing range.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.88-94
• /
• 2006

A typical disk brake system consists of caliper housing, piston, seal and two pads etc. The configuration of seal groove, dimension of piston and seal, and seal material properties are important ones for brake performance, as these affect the retraction of piston. The rubber seal is designed to perform dual functions of sealing the brake oil at brake-applied and retracting the caliper piston at brake-released. In this paper, the seal stress is analyzed using Finite Element Method and experiment is conducted by Taguchi's Method. We attempt to quantify the critical design factors in the seal groove and evaluate their impact on some of brake performance factors. The investigation obtained from this study can not only enhance the seal groove design optimization, but also reduce product prototype testing and development time.

• 한국CDE학회논문집
• /
• 제12권1호
• /
• pp.15-26
• /
• 2007

We have developed a method that enables a user to better understand and enjoy the contents of 3D digital archives, thereby enhancing the user's experience. The system's interactive interface, built using virtual reality technology, enables the user to "walk through" the archives, comparing two or the same content at different points in time. For example, a user can compare the proposed design for a building with the actual building and can compare the states of restoration of a cultural heritage site over time. This ability to perform multilateral comparisons enables the user to clarify the relationship between contents, the influence of one content on another, and the causal relationship between contents. Testing of a prototype system for a 3D digital archive of cultural heritage sites showed that it worked smoothly and that the users could easily operate the navigation system.

• Architectural research
• /
• 제12권2호
• /
• pp.15-22
• /
• 2010

Our prediction model is based on the development of "Semantic Location Model." It embodies geometrical and topological information which can increase the efficiency in prediction and make it easy to manipulate the prediction model. Data mining is being implemented to extract the inhabitant's location patterns generated day by day. As a result, the self-learning system will be able to semantically predict the inhabitant's location in advance. This context-aware system brings about the key component of the ubiquitous computing environment. First, we explain the semantic location model and data mining methods. Then the location prediction model for the ubiquitous computing system is described in details. Finally, the prototype system is introduced to demonstrate and evaluate our prediction model.

• Tribology and Lubricants
• /
• 제24권2호
• /
• pp.82-89
• /
• 2008

The purpose of this study is to develop the proto type sensor installed inside an oil filter in order to detect oil deterioration level. The sensor is made up with two concentric cylinders with constant gap in between and a filter element inside the central area. The size will be designed as similar as real oil filters. The sensor will be tested on a test rig, which is circulating engine oil, with the same size of an oil filter adapting housing as real engines'. It will be measured the capacitance of a sample engine oil, then be able to be gotten the dielectric constant. The changes in the dielectric constant could be correlated with the engine oil deterioration level if the sensor development would be completed. In this paper, it will be shown the test results carrying out under variable temperature conditions at atmosphere pressure.