• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.234-236
• /
• 2004

Transmission control protocol(TCP) is protocol used in internet. TCP is seldom transmission error and is protocol based on wire environment. TCP uses 3 way handshake ways, data transmission control through windows size, data transmission control through reception confirmation, sliding window for packet delivery. In this study, designed TCP packet ion module for analyze the TCP segments & correct information about TCP. TCP capture in internet using designed TCP module and analysed TCP segments composition. Through this, could analyze the correct information of protocol in network.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.394-397
• /
• 2003

This paper has been studied a interworking signalling protocol between two hybrid networks by analyzing Satellite B-ISDN architecture, DSS2 Layer 3 Signalling protocol, B-ISUP protocol, S-BISUP protocol stack and so on. Also in the paper, messages and primitives have been defined for B-ISDN's Connection Type, Ownership and each protocol in order to connect point-to-multipoint. And then this paper has designed basic call procedures for OBP Satellite B-ISDN NNI interworking protocol, verified and implemented them.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.96-104
• /
• 2006

This paper presents design methodology, encient verification and implementation of a CAN protocol controller. The design methodology uses a heuristic technique to make the design flexible and cost effective. Using the design methodology, we created architecture for a CAN controller which has flexible and low cost features. For faster time-to-market and reliable operation of the designed CAN protocol controller, we p개posed a three-step verification process which uses three different kinds of verification techniques. The goal of this three-step verification is to reduce the number of test sequences in order to rapidly implement the design without loss of reliability for faster time-to-market. The designed CAN protocol controller was fabricated using a 0.35 micrometer CMOS technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.11
• /
• pp.895-901
• /
• 2013

In this paper we propose design of a multi-protocol gateway middleware based on USN. The proposed multi-protocol gateway middleware defined the transmit messages format, and were used the USN module interface protocol for connect to external application MCU using the UART. In this case, the gateway was checks the communication state of Zigbee module with settings information, and setting Zigbee serial PDU format. The experimental results of the proposed multi-protocol gateway middleware were proved the efficiency of integrate protocol gateway to use the multi-protocol gateway than gateway to using the repeater through the power control and communications a controlled experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.21-33
• /
• 1997

This dissertation deals with the design and VLSI implementation of the MTP(Multimedia Transport Protocol) protocol for the high speed networks. High throughput, functional diversity and flexible adaptation are key requirements for the future transport protocol. However it is very difficult to satisfy all these requirements simultaneously. Fortunately, the future networks will be very reliable. It means that the future transport protocol will usually perform some fixed functions without the protocol state information. According to this concept, we proposed and designed the MTP protocol that is consisted of Information Plane and Control Plane. Information Plane performs some fixed functions that are independent of the protocol state information as far as no error. However Control Plane manages the protocol state information and controls the operation of Information Plane. Our MTP protocol was finally implemented as an FPGA chip using the VHDL. We built a testbed for verification of the implemented protocol, and it was shown that the MTP protocol worked correctly and made a throughput of about 800 Mbps. Our future works include the addition of multiplexing and multicasting capabilities to our protocol for multimedia applications.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2782-2786
• /
• 2011

In this paper a protocol design for bus network communication between onboard signalling system and MMI(Man Machine Interface) will be presented and illustrated. Recently, many onboard signailling systems adopt hot standby for safety reasons. Hot standby is a method of redundancy in which the primary and secondary systems run simultaneously. It is convenient to use bus network(bus topology) in a hot standby system for communication between onboard signalling system and MMI. Because bus network is the simplest way to connect multiple clients such as onboard signalling system, MMI and etc. However, there are many problems when two clients want to transmit at the same time on the same bus. A effective protocol is necessary to solve that problems. We will describes protocol design which is useful when onboard signalling systems and MMIs are connected via RS485(Bus Network).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.386-388
• /
• 2017

In this paper, we propose a novel protocol design for multi-subband feedback-based multicast services in LTE systems, which reduces feedback overheads with guaranteeing QoS. Through the experimental results, it is manifested that the proposed protocol is able to reduce more feedback overheads in comparison with the conventional scheme.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.41-46
• /
• 2019

In this paper, it is necessary to study the bandwidth and network system for efficient image transmission in the current era of drone imaging, and to design routing protocols to round out and cluster two or more multi-drones. First, we want to construct an ad hoc network to control the multidrone. Several studies are underway for the clustering of drones. The aircraft ad hoc network (FANET) is an important foundation for this research. A number of routing protocols have been proposed to design a FANET, and these routing protocols show different performances in various situations and environments. The routing protocol used to design the FANET is tested using the routing protocol used in the existing mobile ad hoc network (MANET). Therefore, we will use MANET to simulate the routing protocol to be used in the FANET, helping to select the optimal routing protocol for future FANET design. Finally, this paper describes the routing protocols that are mainly used in MANET and suitable for FANET, and the performance comparison of routing protocols, which are mainly used in FANET design.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.573-580
• /
• 2002

Reusing IPs requires interface protocol related tasks such as writing test benches and designing interface protocol conversion circuits, e.g. wrappers for IPs. The results of those tasks usually include IPC(interface protocol component)s for the corresponding IPs, similar to bus protocol components of the bus functional models. This paper proposes a methodology for the interface circuit design using synthesizable In that can be re-used. IPC recognizes or executes transactions over the given interface ports. So we present a transaction-oriented interface protocol description language, and a method to convert the description into an IPC in synthesizable VHDL code. With experiments, we show that the interface design using IPC does not cause significant area overhead compared with the interface design without IPC. The proposed IPC-based approach can be employed to reduce the interface design time since the designers can reuse IPCs without understanding the detailed interface protocols.

• The Korean Journal of Emergency Medical Services
• /
• v.4 no.1
• /
• pp.17-29
• /
• 2000

As technology advances rapidly, emergency medical dispatching systems must also advance. Optimal emergency medical dispatching requires the courage to practice medicine at dispatch. Modern emergency medical dispatch provides appropriate resource responses with the use of an (Advanced Medical priority Dispatch System(AMPDS) in U.S.A. The AMPDS is a systematic protocol for all aspects of the dispatch process. Based on the AMPDS chief complaint list, we initiated a basic design on pre-arrival instruction protocol and completed the scripted pre-arrival instruction protocol, using Cardiopulmonary resuscitation(CPR) protocol. Implementation of this study creates computerized emergency medical dispatching system for future enhancements, such as the AMPDS.