• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.820-824
• /
• 2004

Personal Robot System in developing, have a module architecture, each module are connected through heterogeneors network systems like Ethernet, WLAN (802.11), IEEE1394 (Firewire), Bluetooth, USB, CAN, or RS-232C. In developing personal robot system we think that the key of robot performance is interoperability among modules. Each network protocol are well connected in the view of network system for the interoperability. So we make a bridging architecture that can routing, converting, transporting data packets with matcing each network's properties. Furthermore we suggest a advanced design scheme for realtime / non-realtime and control signal (short, requiring hard-realtime) / multimedia data (large, requiring soft-realtime). By some application systems, we could test performance, interoperability and stability. In this paper, we show our design concept, middleware architecture, and some applications systems using this middleware.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.278-282
• /
• 2001

The discovery of tacit knowledge from domain experts is one of the most exciting challenges in today\`s knowledge management. The nature of decision knowledge in determining the quality a firm\`s short-term liquidity is full of abstraction, ambiguity, and incompleteness, and presents a typical tacit knowledge extraction problem. In dealing with knowledge discovery of this nature, we propose a scheme that integrates both knowledge elicitation and knowledge discovery in the knowledge engineering processes. The knowledge elicitation component applies the Verbal Protocol Analysis to establish industrial cases as the basic knowledge data set. The knowledge discovery component then applies fuzzy clustering to the data set to build a fuzzy knowledge based system, which consists of a set of fuzzy rules representing the decision knowledge, and membership functions of each decision factor for verifying linguistic expression in the rules. The experimental results confirm that the proposed scheme can effectively discover the expert\`s tacit knowledge, and works as a feedback mechanism for human experts to fine-tune the conversion processes of converting tacit knowledge into implicit knowledge.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.277-280
• /
• 2009

Wind monitoring system is an absolutely-required system for assessing a performance and fatigue load of the wind energy generator in an on-shore wind energy experimental research complex. It was implemented for the purpose of monitoring the wind information measured from a meteorological tower at the monitoring house and of utilizing the measured data for the performance assessment, by using the LabVIEW program. Then, by adding the performance assessment-related data acquired from the wind energy generator during the performance assessment and the data recorder for synchronizing the data of meteorological tower, the system was implemented. Because it transmitted the data by converting the output 'RS-232' of data logger which measures the wind condition into CAN protocol, the data error rate was minimized, This paper is intended to explain the developed wind data monitoring system.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.6
• /
• pp.69-74
• /
• 2009

Monitoring system is an absolutely-required system for assessing a performance and fatigue load of the wind turbine in an on-shore wind energy experimental research complex. It was implemented for the purpose of monitoring the wind information measured from a meteorological tower at the monitoring house, and of utilizing the measured data(fatigue data and electric analyzing data of wind turbine)for the performance assessment, by using the LabVIEW program. Then, by adding the performance assessment-related data acquired from the wind turbine during the performance assessment and the data recorder for synchronizing the data of meteorological tower, the system(BusDAQ) was implemented. Because it transmitted the data by converting the output 'RS-232' of data logger which measures the wind condition into CAN protocol, the data error rate was minimized. Also, This paper is introduced to make the best use of the developed monitoring system and to explain about construct of the system and detailed data communication of its system.

• ETRI Journal
• /
• v.35 no.4
• /
• pp.655-665
• /
• 2013

Hybrid digital multimedia broadcasting (DMB) is a next-generation mobile TV system that combines broadcasting and wireless communication networks and can provide various high-quality multimedia services. However, if a system adheres to the current standard of transmitting the DMB content in the form of MPEG2-TS through wireless networks, it results in a burden on the network due to low transmission efficiency. The reasons for the low transmission efficiency are as follows. First, due to its constant bitrate characteristic, DMB MPEG2-TS includes a considerable amount of needless information, such as NULL packets and stuffing bytes. Second, due to the inflexibility of the Real-time Transport Protocol (RTP) standard, one cannot fully utilize the maximum transmission unit of the network when converting MPEG2-TS to RTP stream for transmission. This paper proposes a new transmission scheme that resolves these problems. Experiment results show that the proposed scheme improves data bitrate transmission efficiency by 8% to 36%, compared to the standard scheme, in the streaming of various real-DMB contents.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.515-519
• /
• 2004

A Propeller-Anemometer is an instrument used specifically, to measure the wind speed. The accurate measurement of the wind speed is vitally important such required by any weather stations. In this research, the measurand of the instrumentation was the rotational speed of the propeller and the instrumentation result or output data was wind velocity. The speed measured was recorded digitally in the computer by using specific software. A specific sensor used to measure a variable by converting information of the variable (rotational speed of the propeller) into a dependent signal such as electrical signal in form of voltage. The development of Propeller-Anemometer involved few sets of instrumentation process and equipment. It included three major parts, mechanical, electronics and computer. The main instrumentation processes were physical and signal interfacing, signal conditioning, logic interfacing, data transmission to computer and processing the data. Generally, this paper presents the overall concept and design of Propeller-Anemometer Instrumentation. However, an emphasis was mainly in designing and building the interfacing system, hardware and software. Basically, for the first phase of the development, this project designed and built the RS232 terminal using Peripheral Interface Controller (PIC), PIC16F873. The hardware can be interfaced to computer or other compatible devices. This routine converted input voltage from the circuit to speed (velocity) and transmitted them afterwards to the target device by using the RS232 transmission protocol. This implementation implied a computer display as visual interface. For the purpose of this paper, RS232 data transmission was carried out using a Microsoft Visual Basic software routine.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.347-354
• /
• 1999

Generally, transceiver is operated to the remote control for the purpose of breading the traffic zone which is established on a mountain peak, island and building top using private line. Therefor, the remote control system of public radio station have been the very important role that is decision the quality relate to the quickness, accuracy, safety of communication on old type transceiver of SSB, VHF etc. In the case of using the only 1 private line which is exchanged voice signal with data signal had mixed or interrupted for up/down of channel, PTT control and monitoring of transmission channel and power. The up/down of channel and PTT control is according to the ASK and the data of monitoring is transfered to the FSK modulation, additional algorithm is studied on the serial protocol and traffic sequence using the MCS-51 processor in the simplex communication methode.

• The Journal of the Korea Contents Association
• /
• v.5 no.3
• /
• pp.83-91
• /
• 2005

The digital signature can be verified and disavowed only with cooperation of the signer in 'undeniable signature scheme. A signed confidential document of a company can be copied and delivered to a rival company. If a conventional signature scheme is used to sign the document, it can be confirmed as authentic by verifying the signature without the signer's cooperation. However, if the company doesn't want the document to be verified as authentic by the rival company, it is recommended to use the undeniable signature scheme. Convertible undeniable signature scheme has additional property that the signer can convert undeniable signature to the ordinary one. The document signed by undeniable signature scheme that is no longer confidential can be opened to public use by converting the signature to the ordinary one. In this study, the efficient multipurpose convertible undeniable signature scheme based on El-Gamal signature scheme is proposed. The proposed scheme satisfies undeniable property and can convert undeniable signature to the ordinary one. The number of public keys and signatures are less than those of Boyar's convertible signature scheme. It also reduces the number of communication steps of the signature confirmation protocol.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.266-271
• /
• 1999

The purpose in this study has to development the system on increasing operation of old-typed transceiver for solve the question that limited allocation frequencies and continuesly icreasment of traffic. Therefore, we are desigened the remote control system that has the function for variable channels, PTT and monitoring of transmission power and frequencies. Exchange of control data is to hold in common the twist two-wire or telephone line for the voice transmission. The H/W is consist of FSK and MCS-51 processor which are up-down control of channel, n control and monitoring display by serial data transmission. According to the simplex traffic operation is designed the algorithm of serial data transmission by sequential transmission sequence and protocol. The S/W of sequential transmission sequence is designed to usefully the intergrated communications system which is able to connection between the multi-transceiver and multi-terminal by master processor.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.8-16
• /
• 2013

Active studies are under way on telemedicine and medical support based on mobile devices in order to vitalize U-Healthcare. Especially when the medical law is revised to allow a remote prescription system, studies on a mobile prescription system will rapidly increase. And yet since mobile apps have less compatibility due to the nature of mobile platform, there is a restriction that they have to be redeveloped to be compatible with the platform. To compensate this problem, this study designs a mobile web prescription interface by using HLTML5, the standard language of mobile web development and jQuery Mobile, a JavaScript Library. It also adds a feature of converting to a form of standard protocol HL7-based messages to share data with existing hospital information system. This interface makes it possible to be interlocked with the existing hospital information system through the transmission of the HL7 messages. The advantage of the proposed system is that it can be used in various environments since it is independent of mobile platforms and compatible with general computers.