• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.248-254
• /
• 2023

This study aims to measure the skin rigidity of different facial areas among Koreans and propose guidelines for each area's skin rigidity that can be applied with a facial robot for testing respiratory protective devices. The facial skin rigidity of 40 participants, which included 20 men and 20 women, aged 20 to 50, was analyzed. The rigidity measurement was conducted in 13 facial areas, including six areas in contact with the mask and seven non-contact areas, by referring to the facial measurement guidelines of Size Korea. The facial rigidity was measured using the Durometer RX-1600-OO while in a supine position. The measurement procedure involved contacting the durometer vertically with the reference point, repeating the measurement of the same area five times, and using the average of three values whose variability was between 0.4 and 4.2 Shore OO. The rigidity data analysis used precision analysis, descriptive statistics analysis, and mixed-effect ANOVA. The analysis confirmed the rigidity of the 13 measurement areas, with the highest rigidity of the face being at the nose and forehead points, with values of 51.2 and 50.8, respectively, and the lowest rigidity being at the chin and center of the cheek points, with values of 19.2 and 20.7, respectively. Significant differences between gender groups were observed in four areas: the tip of the nose, the point below the chin, the area below the lower jaw, and the inner concha.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.2
• /
• pp.169-178
• /
• 2011

Objectives : This study was conducted to investigate the actual state of dental hygienist's behavior for infection control during dental practice and radiologic examination and to evaluate the dental hygienist's awareness of the importance of infection control in dental office. Methods : A survey on 218 dental hygienists was carried out. The respondents to complete a questionnaire were the dental hygienists who were in dental office on Gwang-ju area or attended complementary training conducted by the Seoul Branch of Korean Dental Hygienists Association in April 2010. The data were collected and analyzed with $x^2$ test, t-test, ANOVA using SPSS program. Results : The ratios of educational experience for infection control in dental practice and radiologic examination room accounted for 87.6% and 30.3% respectively. Behavior degree of mask-wearing in the dental practice and radiologic examination room were $4.60{\pm}0.70$ and $3.77{\pm}1.09$ respectively. Behavior degree of glove-wearing in the dental practice and radiologic examination room were $4.40{\pm}0.91$ and $3.68{\pm}1.17$ respectively. In case of the relation between educational experience and behavior degree in mask-wearing or glove-wearing, there was no significant difference in the performance of mask or glove wearing during dental practice, and mask-wearing during radiologic examination. However, there was a significant difference (p<0.05) in the performance of glove-wearing during radiologic examination, which revealed that behavior degree between the respondents having educational experience and the others no having it were $3.92{\pm}1.19$ and $3.58{\pm}1.14$ respectively. The surface disinfection control for radiation and protective equipments used in radiologic examination room was done by occasional needs without premeditated schedules. Conclusions : The result of this study shows lower behavior degree during radiologic examination compared with one during dental practice. We suggest that there are needs to raise the awareness of infection control and to improve infection control behavior, and through this study, the importance of education was verified.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.269-282
• /
• 2017

Objectives: Currently, masks against yellow dust and fine particulates are being certified with no consideration of facial dimensional variations among children and adults. The aims of this study were to develop masks against yellow dust and fine particulates for children in Korea and provide basic data to suggest new test methods for mask certification that consider the breathing capacity of children. Methods: A total of 730 study participants aged from six to 13 years old were recruited in the Seoul, Gyeonggi, and Incheon region. This study used a 3D scanning instrument to obtain 16 facial anthropometric data points. Literature reviews, a comparison of breathing capacity between adults and children, and analysis of children's pulmonary physiological data were conducted in order to suggest new test standards for certifying children's masks against yellow dust and fine particulates. In addition, types of children's masks, choice of wearing a mask or not, and reasons for not wearing masks were surveyed. Results: Based on a clustering analysis of participants' facial dimensions, facial shapes were classified into three groups: small, medium, and large. The sizes of children's masks were subtracted by using 3D sketch techniques(Large: $121.25mm{\times}89.46mm$, Medium: $111.92mm{\times}78.55mm$, Small: $102.13mm{\times}72.87mm$). In certifying children's mask, flow rates of $60{\ell}/m$ for the filtering efficiency test and $20{\ell}/m$ for the breathing resistance test were recommended, since children's pulmonary physiological capacity is about 60-70% of adults' pulmonary capacity. Conclusions: The results of this study suggest that three mask sizes for children would be sufficient and practical for providing protection against yellow dust and fine particulates. Revising current test methods for certifying respiratory protective devices for children is important, since children's pulmonary physiological capacity substantially differs from that of adults. Therefore, it is recommended that new test standards for certifying children's masks be promulgated in the near future.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.191-194
• /
• 2011

A symmetric-viewing inverse-twisted-nematic (ITN) liquid crystal display (LCD) with alternating alignment layers was developed using a stamping-assisted rubbing (SAR) technique. A patterned layer of a fluorinated acrylate polymer was transferred onto the first rubbed vertical-alignment layer prepared on a substrate by stamping. The fluorinated acrylate polymer provided a protective layer covering the first rubbed alignment layer during the second rubbing process, which promoted the vertical alignment of the LC molecules. The LC cell in the ITN geometry with two orthogonally rubbed alignment layers showed symmetric-viewing characteristics with fourfold symmetry. The SAR technique was shown to be a mask-free alignment method of producing multidomains for symmetric-viewing LCDs.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.180-183
• /
• 2009

A stamping-assisted rubbing technique for generating bidirectional alignment in the fabrication of wide-viewing twistednematic (TN) liquid crystal displays (LCDs) was developed. A patterned layer of a fluorinated acrylate polymer was transferred onto the first rubbed alignment layer prepared on a substrate by stamping. The fluorinated acrylate polymer provides a protective layer that covers the first alignment layer during the second rubbing process to facilitate the bidirectional alignment of the LC molecules. The LC cell in the twisted geometry with two bidirectional-alignment layers showed stable electro-optic properties and wide-viewing characteristics. The stamping-assisted rubbing technique serves as a mask-free alignment method of producing multidomains for wide-viewing LCDs.

• Korean Journal of Veterinary Service
• /
• v.38 no.4
• /
• pp.241-248
• /
• 2015

This study was aimed to investigate factors that affected the status of wearing personal protective equipment (PPE) for handling poultry carcasses with potential exposure to virulent avian infectious agents. A large outbreak of high pathogenic avian influenza (HPAI) occurred in South Korea in 2014. Many public officers participated for euthanizing and handling livestock carcass. However, several safety issues with using PPE were revealed. Therefore, a questionnaire survey was conducted for 340 people who participated euthanasia and carcass disposal in the place where HPAI mainly occurred in 2014. It was found that 31.8% of the respondents had ever taken off their protective equipment during operations because of its inconvenience. The most inconvenient PPE was goggles (54.6%), followed by mask (20.2%), latex gloves (11.6%), shoe covers (5.9%) and protective clothing (5.3%). The main complaints about this individual PPE was unclear sight, damp emitted toward eye, sweating, tearing easily and sweating, respectively. Considering such problems of PPE, new possible directions for improvement of gloves and goggles were suggested. With newly developed rubber coating fabric gloves and conventionally using latex and fabric gloves, H3N2 influenza virus transmission experiment was conducted. Rubber coating fabric gloves showed similar efficiency for blocking virus transmission with latex laboratory gloves and were not easily torn by sharp claws of chicken. In addition, air flow control safety eyewear was suggested to minimize moisture formation. The air flow control system efficiently suppressed moisture formation inside the goggles. Therefore our study will provide more specific directions about new PPE development for safety protection of actual wearers.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.579-588
• /
• 2018

Purpose : To analyze the eyeglasses supply system for ametropic soldiers in ROK military. Methods : We investigated and analyzed the supply system of eyeglasses for the ametropic soldiers provided by the Korean military. The refractive powers and corrected visual acuity were measured for 37 ametropic soldiers who wear insert glasses for ballistic protective and gas-masks supplied by the military based on their habitual prescriptions. Full correction of refractive error was prescribed for subjects having less than 1.0 of distance visual acuity, and comparison was held for inspecting the changes in corrected visual acuity. Suggestions were provided for solving the issues regarding current supplying system, and this study investigated the applicabilities for utilizing professional optometric manpower. Results : The new glasses supplied by army for ametropic soldiers were duplicated from the glasses they worn when entering the army. The spherical equivalent refractive powers of the conventional, ballistic protective and gas-mask insert glasses supplied for 37 ametropic soldiers were $-3.47{\pm}1.69D$, $-3.52{\pm}1.66D$ and $-3.55{\pm}1.63D$, respectively, and the spherical equivalent refractive power of full corrected glasses was $-3.79{\pm}1.66D$, which showed a significant difference(p<0.05). The distant corrected visual acuity measured at high and low contrast(logMAR) of conventional, ballistic protective and gas-mask insert glasses were $0.06{\pm}0.80$, $0.21{\pm}0.82$, $0.15{\pm}0.74$, $0.34{\pm}0.89$, $0.10{\pm}0.70$ and $0.22{\pm}0.27$, respectively, while the corrected visual acuity by full corrected glasses were increased to $0.02{\pm}1.05$, $0.10{\pm}0.07$, $0.09{\pm}0.92$, $0.26{\pm}0.10$, $0.04{\pm}1.00$ and $0.19{\pm}1.00$, respectively. There was a significant difference(p<0.05) except for the case of the low contrast corrected visual acuity of the conventional and gas-mask insert glasses. The procedure for ordering, dispensing, and supplying military glasses consists of 5 steps, and it was found that approximately two weeks or more are required to supply from the initial examination. Conclusion : The procedure of supplying the military glasses showed three issues: 1) a lack of refraction for prescription system, 2) relatively long length of time required for supplying the glasses, 3) an inaccurate power of supplied glasses. In order to solve those issues, in the short term, education is necessarily required for soldiers on the measurement of the refractive powers, and in the near future, further standard procedures for prescription of glasses as well as the securement of optometric manpower are expected.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.168-179
• /
• 2002

The purpose of this study was to find a method for improving the children's behavior during dental treatment in relation with dentist's attire. For this study 150 children, visiting a dental clinic, were asked to participate in a survey on the attire of the dentist. The results of the survey were as follows: 1. In the survey for the preference between gown and ordinary clothes according to sex(P<0.05), age(P<0.05), residence (P<0.05) and number of visits(P<0.05), there was more preference for gown(65.3%). 2. The preference for the type of gown and attire under the gown was a long gown and white shirt (30.7%), followed by a suit-like gown (18.7%) and white shirt, and long gown and polo shirt(17.3%). 3. The preference for the color of gown was white(34.7%), followed by pink (18.7%), green(18.0%), blue(15.3%) and yellow(13.3%). 4. The preference for the pattern on the gown was cartoon characters(49.3%), followed by hospital logo(28.7%) and no pattern(14.7%). 5. The preference for ordinary clothes of female dentists was polo shirt(37.3%), followed by striped shirt(28.7%), round T-shirt(18.7%), and everyday Korean traditional dress(15.3%). 6. The preference for ordinary clothes of male dentists was pattern necktie and no pattern Y-shirt(28.0%), followed by no pattern necktie and Y-shirt(21.3%) or pattern shirt with no necktie, and no pattern Y-shirt with no necktie(14.7%). 7. The preference on the protective equipment worn was mask and glove(28.7%), followed by no protective equipment(26.7%), mask, glove and protective glasses(22.7%) at)d only mask(22.0%). Based on the above results, it seems that parting with the traditional white gown and wearing multi-color and pattern attire will provide psychological stability and help improve children's behavior during treatment.

• The Journal of the Convergence on Culture Technology
• /
• v.3 no.2
• /
• pp.15-20
• /
• 2017

We are investigated about the Hepatitis infection risk of the funeral director related to wearing PPE(Personal Protect Equipment) within Metropolitan, Chungcheong and Gyeongsang regions in Korea. We are classified that the vaccinated group was classified as low risk group and the non-vaccinated group was classified as high risk group. And we are analyzed the risk rate of infection based on whether or not to wear PPE(personal protective equipment) among high-risk groups. The result is as follows. The mask wearing rate of high-risk group about HAV(hepatitis A virus) is three times lower than that of low-risk group. The surgical glove wearing rate of high-risk group about HBV(hepatitis B virus) is twice lower than that of low-risk group. The surgical glove and mask not wearing rate among the high-risk group observe that potential infection risk was high 4.23 times and 3.5 times, respectively. We are concluded that increasing the risk of potential infection risks from the funeral director could result in increased risk of infection to national public health, including the bereaved family. We are suggested that the funeral director must be bound to vaccinate against hepatitis and make PPE mandatory. It is deemed necessary for the government to develop policies to promote personal health and national health care.

• Journal of Yeungnam Medical Science
• /
• v.33 no.2
• /
• pp.85-89
• /
• 2016

Background: Formaldehyde is used to preserve cadaver in medical schools, and students are exposed to formaldehyde during cadaver dissection classes. When humans are exposed to formaldehyde, it induces mucosal inflammation, skin inflammation, and declining of neurobehavioral function including attention and memory executive functions. The purpose of this study is to identify the effects of formaldehyde exposure on student's neurobehavioral performance during cadaver dissection classes. Methods: The level of formaldehyde was measured in a cadaver dissection class. A total of 16 students were randomly divided into two groups. One group wore respiratory protection masks, while the other group did not. Among many subtests in Korean Computerized Neurobehavioral test, backward digit span was tested on all subjects before and after the class. Results: The length of memorized digit span between the two groups was not significant; however there was a greater decrease in neurobehavioral function after formaldehyde exposure in the non-mask group than the mask group. Conclusion: Formaldehyde exposure during cadaver dissection may likely decrease neurobehavioral performance of students. Therefore, proper ventilation system and respiratory protective equipment are necessary to protect medical school students from adverse effects of formaldehyde exposure.