• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.940-944
• /
• 2003

With the increasing demand for plastic micro components, micro-/nano-molding using the mother stamper has received much attention. If the replication temperature is too high, the adhesion between the stamper and the polymer melt may deteriorate the surface quality of the replicated part, excessively wearing down the stamper. In this paper, an experimental method analyzes the temperature dependency of the anti-adhesion property between the actual stamper with patterns of sub-micrometer and the polymer melt. As a practical example, a correlation between the contact angle of the stamper and the surface quality of the molded substrates as a function of the replication temperature, respectively, was obtained quantitatively.

• Journal of the Korean Home Economics Association
• /
• v.31 no.2
• /
• pp.189-203
• /
• 1993

The objective of this study was to investigate the changes of the fabric absorbency, stiffness and antistatic property by using a fabric softner at laundering. The samples selected in this study were cotton and polyester fabrics. The cotton fabric was treated with 1/2 times(0.035%), 1 time(0.07%), 3 times(0.21%) and 10 times(0.7%) of the commercially suggested concentration (0.07%) of the fabric softner. And polyester fabric was done at 1 time(0.07%) of that. In order to examine the effect of the fabric by using a fabric softner, the abstraction of a surface active agent and quantitative analysis was performed by using a UV/VIS Spectroscopy and the correlations among the absorbency, stiffness and antistatic property was analyzed. The results obtained from this study were as follows; 1. In the cotton fabric, fabric softner gave the degradation of absorbency, and stiffness improvement was not shown by repeated fabric softner on the cotton fabric. 2. In the polyester fabric, the absorbency increased and the stiffness in creased very slightly. Specially, it is desirable to use fabric softner on the polyester due to improvement of antistatic property.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1-6
• /
• 2008

Due to the self-similarity of Berkovich and conical indenters, different materials may show the same loaddepth curve for single indentation. In this study, we first compare the load-depth characteristics of conical and Berkovich indenters via finite element method. We also analyze the variation of load-depth curves with angle of Berkovich indenter, indentation parameters, and material properties. With numerical regressions of obtained data, we then propose dual-Berkovich indentation formulae for material property evaluation. The proposed approach provides the values of elastic modulus, yield strength and strain-hardening exponent and corresponding stress-strain curve with an average error of less than 3%. The method is valid for any elastic indenters made of tungsten carbide and diamond for instance.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.13-19
• /
• 2012

There are many dynamic properties in measured end-milling force. So, it is difficult to predict the real static property of end-milling force. Also the behavior of end-milling force is very complex to predict with the measured one. To extract the static property from measured force, it must be filtered and its problem is closely related to a de-noising one. Also this paper presents alternative de-noising method of end-milling force using wavelet filter bank, based on the wavelet transform and its inverse one. In this paper, by comparing the measured force and its wavelet filtered one, the fundamental end-milling force property after wavelet transform is well reviewed and analyzed. This result of wavelet filtering with filter bank shows the static force of end-milling which has severe dynamic properties occurring in entry and exit state of edge emersion into the workpiece.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.42-49
• /
• 1997

This experimental study was performed to find fuel property variations of the ultrasonic energy adding gasoline and improve the spray characteristics of the multipoint injector for EFI engine. The cause and effect of the characteristic improvement of the ultrasonic energy adding fuel was found out by the chemical structure analysis (NMR, IR), distillation and viscosity test. The results are obtained that the chemical property of gasoline organizition was changed aromatics to paraffins and branch index as the physical characteristics of gasoline were improved by ultrasonic energy. There were higher distillation and lower viscosity in ultrasonic energy adding gasoline.

• Asian Journal of Innovation and Policy
• /
• v.7 no.1
• /
• pp.190-206
• /
• 2018

This article focuses on the legal systems and practice of intellectual property protection in Japan and China, including the relating civil litigation and administrative litigation procedures. The challenge of balancing the relationship between an invalidation trial and an invalid defense during the process of civil patent infringement litigation is a common issue to be solved in both Japan and China. In addition, it is quite usual that the IP products are being imported and exported across the borders due to the expansion of international trade. Accordingly, one of the most symbolic and difficult issues is how to balance the development of international trade and IP protection in each country. In other words, there is a practical issue regarding whether a parallel import of patented products is acceptable to a country or not. The key to determining this issue depends on the judgment of international exhaustion.

• Korean Journal of Materials Research
• /
• v.13 no.2
• /
• pp.81-87
• /
• 2003

Microstructures and mechanical properties of variously heat treated 0.85% carbon steel(eutectoid steel) were evaluated by magnetic property measurements. Microstructural analysis (pearlite interstellar spacing), measurement of mechanical properties(Rockwell hardness, yield stress, fracture stress) and magnetic properties(coercivity, remanence, hysteresis loss, saturation magnetization) were performed to clarify mutual relationships among these parameters. Water quenched specimens with martensite structure showed much higher coercivity and remanence than air cooled or furnace cooled specimens with pearlite structure. The linear dependence of coercivity and remanence on pearlite interlamellar spacing as well as on Rockwell hardness, yield stress and fracture stress was observed in the pearlitic steel. Hysteresis loss and saturation magnetization showed no distinct trend with pearlite interlamellar spacing.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2008.10a
• /
• pp.38-41
• /
• 2008

This study's basic intention is to analyze property of combination relations of formative element composing robot' s face based on a result of preference response on robot's design. Also, in order to improve preference from the analysis result, the study intended to inquire into possibilities of suggesting design guideline. For the above, photographs of 27 robots' faces were selected as a experimental stimuli, and experiments on preference response and association response were performed. As a result, various properties such as robots' form of eyes having greater influences than facial structure, etc. Based on the result, each formative element's property that could have positive influence preference response on robot's face could be drawn and basic design guideline could also be suggested.

• STI Policy Review
• /
• v.8 no.1
• /
• pp.62-86
• /
• 2017

Intellectual Property Rights (IPR) system is one of the major institutions for incentivizing innovation. However, a strong IPR regime does not necessarily encourage innovation every time. This is because a variety of factors come into play in configuring the ways the IPR system interacts with the dynamics of innovation. In the present study, we examine whether different degrees of absorptive capacity at the industry level bring about heterogeneous effects of a strong IPR regime on the innovation capability of innovators across different industries in developing country. Using the case of the 1986 IPR reform in Korea, which permitted patenting pharmaceutical products and copyrighting computer programs, we analyze the quality of patents produced by Korean applicants between 1982 and 1991. Our analysis finds no evidence that the IPR reform improved the innovation capability of innovators in the two aforementioned sectors, but rather affected their patenting behavior differently.

• Journal of the Korean Society for Railway
• /
• v.6 no.3
• /
• pp.194-202
• /
• 2003

To make railway carbody light in weight has advantages at some aspects of both manufacturing and maintenance. Recently, railway carbodys of steel structure have been lightened their weight by using aluminum extrusion plate. for the additional lightening of railway carbody, an optimal design which maintains proper strength and minimizes weight must be achieved. Optimization which is used with finite element analysis for aluminum extrusion plate has the disadvantage of consuming much time. In this paper, the method of equivalent material property which is available to FEA code is established using the method of equivalent stiffness. This method for plate is expanded into the method for railway carbody structure with plates and shells. An objective function is established for maximum stiffness of unit aluminum extrusion plate using established method of equivalent material property. We performed an multi-objective optimization using the penalty function method. As a result, recommendable shapes and sizes of unit extrusion plate for under-frame of high speed train is presented.