• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.352-357
• /
• 2001

This experiment was carried out in order to develop some chip budding techniques related to the production of high quality maiden apple trees. Optimum chip budding time for apple trees appeared to be from mid-August to early September. Untying wrapping tapes after 6 8 weeks from budding led to higher graft success and better shoot growth than removing the tapes earlier or later than the 6-8 weeks. Dipping pre-cut bud chips into ordinary water of $25^{\circ}C$ for 5 hours did not hamper the graft-success nor the early season growth of the graft compared with non-treated control. Dipping the pre-cut bud-chips into the $35^{\circ}C$ water for 3 hours or for 5 hours hampered the union formation and shoot growth of the 'Fuji' apple trees.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.12
• /
• pp.88-91
• /
• 1994

It is well known that multipoint and computerized intraoperative mapping systems improve the results of surgery for Wolff-Parkinson-White syndrome and show tremendous potential for opening an entirely new era of surgical intervention for the more common and lethal types of supraventricular tachyarrhythmias such as atrial flutter and atrial fibrillation. In addition, the ability to map and ablate the sometimes fleeting automatic atrial tachycardia is greatly enhanced by computerized mapping systems. In this study, we have developed 64 channel computerized data analysis system using microcomputer (Macintosh IIx) for basic research of electrophysiology and electrical propagation. The bipolar electrogram information is acquired from 64 cardiac sites simultaneously at a sampling rate of 1ksamples/sec with continuous and total data storage of up to 30 seconds. When the reference electrogram is selected and reference point is picked up, delay time from the reference point in displayed on two dimensional diagram of the heart. System design permits easy expansion to almost 256 simultaneous sites, This system is expected to enable us to study pathophysiology of cardiac arrhythmia and to improve the results of diagnosis and surgical treatment for cardiac arrhythmia.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.133-137
• /
• 2016

Millimeter wave wireless communication systems, especially those targeting indoor high rate data transfer, have a strong requirement for high quality wireless link. Unfortunately, in this frequency band, the electromagnetic wave has to sustain the high propagation loss caused by the smaller wavelengths. In this scenario, beamforming technique, which enhances the link quality by focusing the radiation power on a direction, becomes one of the most important techniques in millimeter wave band wireless communication. In recent year, there been conducted many research on beamforming to improve the performance of wireless system. In this paper, we evaluate the performance of a simplified codebook-based beamforming scheme which is based on multiple-procedure and three-state beam selection. The simplified scheme significantly reduces beamforming setup time, comparing to the exhaustive searching, two-level searching adopted in IEEE 802.15.3c standard, and also conventional multi-level scheme.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.102-106
• /
• 2016

With the popularity of smart phones and the help of high-speed wireless communication technology, high-quality multimedia contents have become common in mobile devices. Especially, the release of Oculus Rift opens a new era of virtual reality technology in consumer market. At the same time, 3D audio technology which is currently used to make computer games more realistic will soon be applied to the next generation of mobile phone and expected to offer a more expansive experience than its visual counterpart. This paper surveys concepts, algorithms, and systems for modeling 3D sound virtual environment applications. To do this, we first introduce an important design principle for audio rendering based on physics-based geometric algorithms and multichannel technologies, and introduce an audio rendering pipeline to a scene graph-based virtual reality system and a hardware architecture to model sound propagation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.788-794
• /
• 2005

In this paper, we focus on the potential of dual polarized antennas in mobile system. thus, this paper designs exact dual polarized channel with Spatial Channel Model (SCM) and investigates the performance for certain environment. Using proposed the channel model; we know estimates of the channel capacity as a function of cross polarization discrimination (XPD) and spatial fading correlation. It is important that the MIMO channel matrix consists of Kronecker product dividable spatial and polarized channel. Through the channel characteristics, we propose an algorithm for the adaptation of transmit antenna configuration to time varying propagation environments. The optimal active transmit antenna subset is determined with equal power allocated to the active transmit antennas, assuming no feedback information on types of the selected antennas. We first consider a heuristic decision strategy in which the optimal active transmit antenna subset and its system capacity are determined such that the transmission data rate is maximized among all possible types. This paper then proposes singular values decision procedure consisting of Kronecker product with spatial and polarize channel. This method of singular value decision, which the first channel environments is determined using singular values of spatial channel part which is made of environment parameters and distance between antennas. level of correlation. Then we will select antenna which have various polarization type. After spatial channel structure is decided, we contact polarization types which have considerable cases It is note that the proposed algorithms and analysis of dual polarized channel using SCM (Spatial Channel Model) optimize channel capacity and reduce the number of transmit antenna selection compare to heuristic method which has considerable 100 cases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12A
• /
• pp.1182-1188
• /
• 2006

Adaptive OFDM(Orthogonal Frequency Division Multiplexing) improves data capacity and system performance over multipath fading by adaptively changing modulation schemes according to channel state information(CSI). To achieve a good performance in adaptive OFDM systems, CSI should be transmitted from receiver to transmitter in real time through feedback channel. However, practically, the CSI feedback delay d which is the sum of the data processing delay and the propagation delay is not negligible and damages to the reliability of CSI such that the performance of adaptive OFDM is degraded. This paper presents an adaptive OFDM system with a multistep predictor on the frequency axis to effectively compensate the multiple feedback delays $d(\geq2)$. Via computer simulation we compare the proposed scheme and existing adaptive OFDM schemes with respect to data capacity and system performance.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.10b
• /
• pp.2-3
• /
• 2003

A method for rapid propagation of mature Jack fruit was developed. Four types of explants (mature embryos, apical meristems of young seedlings, apices from mature plants and nodal segments) were used. It has been found 88% of young apical meristems produced shoots in Campbell and Durzan (CD) medium compared to 60% in Murashige and Skoog (MS) medium. Only 1/3 of them produced multiple shoots. Shoot initiation from nodal segments was very rare. Mature apices produced callus. Although removal of the sheathing cover around mature buds enhanced the shoot initiation but success rate was low in growth regulator free medium. Embryos respond to the CD medium but not to the MS medium. Embryos from seeds soaked in water for 24 hours produced shoots after 8 weeks of incubation and the success rate was 70% while embryos from dry seeds only produced roots. There was no significant effect of cold storage (refrigeration) for 7 days on shoot initiation from mature embryos (65%) but the ability for shoot induction declines with storage time (55% after 21 days of cold storage). Mature axillary buds were established in Modified Campbell and Durzan (CD) medium supplemented with 0.5mg/1 and IBA. There was a significant difference in the growth performance of shoots according to the period of the year in which explants were collected. Highest (60%) was observed in November-January period. It was only 30% when the explants were collected in February-April or May-July and decreased to 20% in August-October. The shoots produced in November-January showed a higher vigor than those produced in other months. Since Jak fruit show seasonal changes in fruit bearing and shedding of leaves, it can be suggested that the difference in growth performances of tissues cultured in artificial culture media would have been affected by endogenous rhythms.

• Korean Journal of Medicinal Crop Science
• /
• v.24 no.1
• /
• pp.21-26
• /
• 2016

Background : Acer pictum is a deciduous tree belonging to the family Aceraceae. This study was conducted to collect basic data on mass propagation techniques by surveying the germination and growth characteristics of A. pictum seeds. Methods and Results : A. pictum seeds were harvested in 2014 on August 19, September 5, September 29 and October 31. The seeds were then sown on the same dates they were harvested. A portion of seeds harvested in August 2014 were stored at low temperatures and subsequently sown on March 11, 2015. The germination rate of A. pictum seeds was highest in seeds that were stored harvested on October 31. Mean germination time (MGT) was shortest and germination velocity (Rs) was fastest in seeds harvested on October 31. Root collar diameter, total root length, and dry weight were also highest from seeds collected October 31. Conclusions : A. pictum seeds harvested on October 31 had highest germination and growth rates compared with seeds harvested on earlier dates. It is expected that these results demonstrating optimum harvesting and sowing dates will be applicable to future seedling production for this tree species.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.51-65
• /
• 2002

This paper presents a design method of the neural network-based controller using an indirect adaptive control method to deal with an intelligent control for chaotic nonlinear systems. The proposed control method includes the identification and control Process for chaotic nonlinear systems. The identification process for chaotic nonlinear systems is an off-line process which utilizes the serial-parallel structure of multilayer neural networks and simple state space neural networks. The control process is an on-line process which uses the trained neural networks as the system model. An error back-propagation method was used for training of identification and control for chaotic nonlinear systems. The performance of the proposed neural network controller was evaluated by application to the Duffing equation and the Lorenz equation, and the proposed controller was compared with other neural network-based controllers by computer simulations.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.5
• /
• pp.25-33
• /
• 2011

In the nonlinear response history analysis of building structures, the input ground accelerations have considerable effect on the nonlinear response characteristics of structural systems. As the properties of the ground motion, using time history analysis, are interrelated with many factors such as the fault mechanism, the seismic wave propagation from source to site, and the amplification characteristics of the soil, it is difficult to properly select the input ground motions for seismic response analysis. In this paper, the most unfavourable real seismic design ground motions were selected as input motions. The artificial earthquake waves were generated according to these earthquake events. The artificial waves have identical phase angles to the recorded earthquake waves, and their overall response spectra are compatible with the seismic design spectrum with 5% of critical viscous damping. It is concluded that the artificial earthquake waves simulated in this paper are applicable as input ground motions for a seismic response analysis of building structures.