• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.995-1006
• /
• 2003

It is well know that in the wireless communication systems the transmitted signals can suffer from multipath fading due to the wave propagation characteristics and the obstacles over the paths, resulting in serious reduction in the power of the received signals. However, it is possible to take advantage of the inherent diversity imposed in the multipath reception if the underlying channel can be properly estimated. One of the diversity reception methods in this case is Rake processing. In this paper we study the Rake receivers for the direct-sequence spread-spectrum communication systems utilizing PN (pseudo noise) sequences to achieve spread spectrum. A conventional Rake receiver can use the finite-duration impulse (FIR) filter followed by the PN sequence demodulator, where the FIR filter coefficients are the reverse-ordered complex conjugate values of the fading channel impulse response estimates. Here, we propose a new Rake processing method by replacing the aforementioned PN code sequence with a new set of optimum demodulator coefficients. More specifically, the concept of the new optimum Rake processing is first introduced and then the optimum demodulator coefficients are theoretically derived. The performance obtained using the new optimum Rake processing is also calculated. The analytical results are verified by computer simulation. As a result, it is shown that the new optimum Rake processing method improves the MSE performance more than 10 dB over the conventional one using the fixed PN sequence demodulator. It is also shown that the new optimum Rake processing method improves the MSE performance about 10 dB over the Adaptive Correlator that performs the combining of the multipath components and PN demodulation concurrently. And finally, the MSE performance of the optimum Rake demodulator is very close to the MSE performance of OPSK demodulator under the AWGN channel.

• Tunnel and Underground Space
• /
• v.20 no.5
• /
• pp.344-351
• /
• 2010

Slip along a frictional fracture can be approached as initiation and propagation of a mode II crack along its own plane. Fracture mechanics theories predict that under pure mode II loading initiation will occur when the energy release rate of the fracture attains a critical value ($G_{IIC}$), which is generally taken as a material property. For the past few years the rock mechanics group at Purdue University has investigated experimentally the dependence of $G_{IIC}$ on normal stress and on the frictional characteristics of a fracture. A number of experiments has been conducted first on acrylic, a material that, using photoelastic methods, allows visualization of the stress field ahead of the fracture tip; and later on gypsum, a rock model material with relatively low unconfined compression strength. The experimental investigation has been expanded to include other frictional materials with higher unconfined compression strength. Direct shear tests have been conducted on specimens made with cement paste. New observations together with previous experiments indicate that $G_{IIC}$ can only be considered a material property when the peak friction angle of the discontinuity is similar to the residual friction angle; otherwise the critical energy release rate increases with normal stress.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.65-70
• /
• 1996

엔진소음을 소음특성에 따라 분류하면 공력소음(Aerodynamic Noise), 연소소음(Combustion Noise), 기계적인 소음(Mechanical Noise)으로 나눌 수 있으며 소음원의 종류에 따라 분류하면 배기계소음(Exhaust System Noise)으로 나눌 수 있으며 소음원의 종류에 따라 분류하면 배기계소음(Exhaust System Noise), 흡기계소음(Intake System Noise), 냉각계소음(Cooling System Noise), 엔진표면소음(Engine System Noise)등으로 분류할 수 있다. 이러한 여러소음중 엔진 내부의 유동에 의한 흡배기계통으로의 소음방출은 자동차 실 내외 소음의 중요한 문제로 대두되는데, 이를 줄이기 위해 그 동안 소음기 등의 서브시스템의 형태와 그 위치조정에 관한 연구가 수행되어 왔다. 그러나 이것이 비용 또는 성능에 영향을 미치므로 본질적인 소음원을 규명해 내는 것이 필요하게 되었다. 흡배기계의 소음은 엔진의 흡입, 배기행 정시 피스톤의 운동에 의해 팽창 및 압축파 형태의 압력파(pressure wave)로 발생하게 되고, 밸브근방에서는 유동의 박리(separation)에 의해 발생하게 된다. 소음기 등의 서브시스템에서도 유동의 박리에 의해 발생하게 되며 특히 배기행정시 발생하는 압력파는 비선형영역에 있게된다. 흡기소음은 배기에 비해 그 크기가 작아서 그동안 등한시 되어왔으나 이것이 소비자의 불평요인으로 작용하므로써 이에 대한 연구도 활발히 수행되어야 한다. Bender, Bramer[1]는 흡배기계 소음의 외부 방사에 관하여 전반적으로 기술하였고 Sierens등[2]은 흡기계에서 1차원 MOC(Method of Characteristics)방법으로 비정상 유동해석을 하고 실험결과와 비교하였다. J.S.Lamancusa 등[3]은 흡기 소음원을 실험을 통해 예측하였고, 흡기소음도 비선형 거동을 보인다고 밝혔다. Yositaka Nishio 등[4]은 새로운 흡기실험장치를 고안하여 공명기(resonator)의 위치 변화에 의한 저소음 흡기계를 설계 초기단계에서부터 적용하려 하였다. 일반적으로 흡배기계의 복잡한 형상 때문에 대부분 실험을 통해 문제를 해결하려 하였고, 수치해석은 피스톤의 운동을 배제한 단순화한 흡배기계의 정상상태 유동해석이 주를 이루어왔다. Taghaui and Dupont 등[5]은 KIVA코드를 사용하여 흡기포트와 연소실 그리고 밸브의 움직임을 동시에 고려한 수치해석을 도입하였다. 하지만 이들이 밸브의 운동을 고려하기 위해 사용한 이동격자는 격자점은 시간에 따라 변화하지만 그 격자의 수가 일정하게 유지되어 있어서 밸브의 완전개폐를 해석할 수가 없다. 강희정[6]은 단일 실린더와 단일 배기밸브를 갖는 문제로 단순화하여 피스톤과 밸브의 움직임을 고려하므로써 배기행정 후 소음이 어떻게 전파해 나가는가를 연구하였다. 본 연구에서도 최소밸브간격과 최대밸브간격 사이에서만 계산이 가능하나 흡기의 경우는 밸브가 닫힐 때 생기는 압력파가 중요하므로 실린더와 밸브사이에 벽면조건을 주어 밸브의 개폐를 모사하였다.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.149-154
• /
• 2015

A new Phalaenopsis cultivar 'SM 333' was bred by Sangmiwon Orchid, Korea, which produces young plants through tissue culture techniques. The new cultivar 'SM 333', showing the phenotype of multiflora with pink color and small, multibranching-type characteristics, was derived from crossing between Phalaenopsis 'Odoriko' and 'Be Tris'. An elite individual number '02-03-33' later termed 'SM 333' was selected among about 300 individual progenies, based on an intensive selection process covering vegetative and flowering distinctiveness over more than 2 years. In year 2004-2005, the 1st and 2nd characteristic analyses were carried out through performance and uniformity tests. 'SM 333' shows flower color that is bright clean pink (RHS # RP69D) and flower shape that is formal type with 5.0 and 5.8 cm in flower height and width, respectively. 'SM 333' is regarded as raceme flower type suitable for the small casual flower market. The leaves of 'SM 333' grow horizontally and about 20.8 cm in length and 6.5 cm in width. This cultivar also possesses no genetic variation, and is amenable to fast in vitro propagation and easy growth due to its vigorous growth habit. This 'SM333' was registered (Reg. # 2916) with Korea Seed & Variety Service (KSVS) on 1st December, 2009, and the plant breeder's right is currently controlled by Sangmiwon Orchid Company, Korea.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.285-290
• /
• 2009

This experiment was conducted to investigate the propagation system by seed to check growth, flowering, and making seed of three-year-old cactus of potted Mammillaria goldii. M. theresae, and M. pseudopeclinata. Plant height and width of them was 2.5~2.8 cm, and 2.8~3.1 cm, and seed formation of Mammillaria goldii and M. theresae had internal body taking130 to 135 days to ripening seeds, however, M. pseudopectinata had externals taking just 26 days to ripening seeds. The mean seeded pod from April to June of M. goldii was 50.0% and the number of seeds in a pod was 25.3. In M. theresae, the mean seeded pod from April to June was 57.3% and the number of seeds in a pod was 35.0. However, the highest rate of seeded pod on May of M. pseudopectinata was 75.0% and the number of seed in a pod was 66.0. The sib crossing was much more ripening seed fertilization than that of self cross ing in the Mammillaria. The self crossing was formed from 12.0% to 20.0% of seeded pod, from 12.0 to 16.0 number of seed in a pod. However, sib crossing obtained 58.0% of seeded pod, 30 seeds in a pod of M. goldii, 65.0% seeded pods and 40 seeds in a pod of M. theresae, and 75.0% seeded pod, 68 seeds in a pod of M. pseudopectinala as the highest of them.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.291-296
• /
• 2009

This experiment was conducted to investigate the propagation system by seed to check growth, flowering, and making seed of four-year-old seedling cactus of potted Astrophytum asterias 'Nudum', A. asterias 'Super Kabuto', and A. myriostigma 'Nudum'. Plant height and width of Astrophytum asterias 'Nudum' and A. asterias 'Super Kabuto' was 5.3 to 5.5 cm, and 2.5 cm. However, plant height and width of A. myriostigma 'Nudum' was 7.6 cm and 5.6 cm as divided into 8 sections of body. In A. asterias 'Nudum', the mean seeded pod from April to September was 37.0% and the number of seeds in a pod was 43.0. In A. asterias 'Super Kabuto', the mean seeded pod from April to September was 22.5% and the number of seeds in a pod was 26.2. However, the mean seeded pod of A. myriostigma 'Nudum' from April to September was 32.3% and the number of seeds in a pod was 57.4. Especially, the seeded pod and the number of seeds in a pod of A. asterias 'Nudum' in July was the highest, 72.0% and 66.0. The sib crossing obtained much more seeded pods and the number of seeds per pod than that of selfing in the Astrophytum. The self crossing was formed from 9.0 to 20.0% of seeded pod, and 12.0 to 16.0 seeds in a pod. However, sib crossing was formed 60.0% seeded pod and 68.0 seeds in a pod on July of A. myriostigma 'Nudum'.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.3
• /
• pp.164-167
• /
• 2011

A new spray rose cultivar 'Glory Purple' was bred from the cross between a pink spray cultivar 'Macarena' and a pink spray cultivar 'Million Pink' at the National Institute of Horticulture & Herbal Science. The cross was made in 2004 and a candidate genotype which named as 'Glory Purple' was selected in 2009 after three years investigation for agronomical characters from 2007 to 2009. 'Glory Purple', a purple colored spray cultivar, has vigorous growth and has powdery mildew resistance. The major characteristics of this cultivar are high yield and long stem with relatively large flower size with $157stems/m^2/year$ in yield, 63.5 cm in mean length of cut flower, 6.8 cm in mean flower diameter, 25.78 in mean petal number, and 10.2 days in mean vase life. This cultivar is suitable for propagation by both cutting and grafting methods. The consumer's preference of this cultivar is relatively higher than that of the control cultivars, 'Pinky and Charming'.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.328-331
• /
• 2009

The white flowered 'Eorayeon 2ho' is a cultivar of Lilium ${\times}$ formolonga developed in Department of Horticultural Sciences, Kangwon National University, Chuncheon, Korea. $F_1$ hybrid LA-77 was selected from the cross between a selected selting line($S_3$) of L. longiflorum 'Lorina' and a selfing line($S_3$) of L. ${\times}$ formolonga 'Augusta' in 2000. The $F_1$ hybrid LA-77 was backcrossed by a selected line of L. ${\times}$ far molonga 'Raizan No. 1' from 2001 to 2002. 'MF-No.2' was preliminarily selected for its upward flowering habit and high plant height. The evaluation of characteristics was investigated from 2003 to 2004 in Chuncheon and Yungweol, Kangwon province. 'Eorayeon 2ho' blooms in early July at outside, with high resistance to Botrytis and showing upward flowering habit. The plant height is 132.6 cm and the percentage of seed germination is 95.3%. Mean tepal length and width are 16.0 em and 4.3 cm, respectively. The length and width of leaf is 12.3 and 3.2 cm, respectively. This seed propagating cultivar shows high plant height suitable for a cut flower.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.39-44
• /
• 2019

In this study, the relationships between the material properties of the wall and the fuel mass flux in compartment fire. The fire resistant board (fire-board) and steel plate compartments are constructed with a 0.3 m width, 0.5 m height and 3.0 m length. To obtain the mass loss rate considering the location of the fire origin in compartment, experiments of a heptane pool fire are performed with a combustion area of $0.01m^2$ and $0.0225m^2$. The results show that the initial mass flux of heptane, $0.0087kg/m^2{\cdot}s$, is increased to $0.166kg/m^2{\cdot}s$ for fire board and $0.019kg/m^2{\cdot}s$ for steel plate. It means that the fire-scenario should be considered with the thermal characteristics of the material properties and geometric shapes of the compartment to predict fire propagation accurately in a compartment space.

• Journal of the Korea Society for Simulation
• /
• v.30 no.2
• /
• pp.11-22
• /
• 2021

Sonobuoy is widely used as a very important sensor in combat management system using P-3 patrol aircraft due to its advantages of rapid searching into wide exploration range. It is necessary to verify the performance of developed sonobuoy system using various maritime test data in order to be successfully applied in combat management system. But it is difficult to acquire various real maritime data because it needs much time and effort. Therefore we have developed in this paper a synthetic signal generator and a simulator that they can verify the performance of sonobuoy system and evaluate its operational effectiveness without conducting maritime test. We have synthesized target signals based on the characteristics of underwater sound sources, and then developed the synthesized signal generator which consider to sound propagation etc. like as underwater environment. And in the simulator development we use a HMI technique to enhance the convenience of operator, and design to verify the performance of sonobuoy system. The developed signal generator and simulator can be used as useful tools to evaluate the operational effectiveness such as optimal deployment of sonobuoy in combat management system using P-3 patrol aircraft.