• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.157-167
• /
• 2020

Fingerprinting method is useful when estimating the location of a requestor based on LTE signals in an urban area. To do this, it is necessary to acquire location-based signals everywhere in the service area for fingerprint DB generation in advance. However, there may be signal uncollected area within a wide service area, which may cause a problem that the positioning accuracy of the requestor is low. In order to solve this problem, in this paper, signal propagation modeling is performed based on the obtained measurements, and based on this model, the signal information in the non-acquisition region is estimated. To this end, techniques for modeling signal propagation according to a method using measurements are proposed. The performance of the proposed techniques is verified based on the measurements obtained on a test bed selected as Seocho-gu, Seoul. As a result, it can be seen that signal propagation modeling performed based on multidivision segmented measurements has the most performance improvement.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.547-558
• /
• 2013

Ultra broadband communication systems operated at THz frequencies will require the thorough knowledge of the propagation channel. Therefore, an extensive measurement campaign of 50 GHz wide indoor radio channels is presented for the frequencies between 275 and 325 GHz. Individual ray paths are resolved spatially according to angle of arrival and departure. A MIMO channel is recorded in a $2{\times}2$ configuration. An advanced frequency domain ray tracing approach is used to deterministically simulate the THz indoor propagation channel. The ray tracing results are validated with the measurement data. Moreover, the measurements are utilized for the calibration of the ray tracing algorithm. Resulting ray tracing accuracies are discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1347-1352
• /
• 2001

In this study, the acoustic properties of polyester sound absorbing materials with three different bulk densities were investigated by calculating and measuring the acoustic parameters in terms of characteristic impedance, propagation constant, and absorption coefficient. For the calculations, Delany and Bazley's empirical equation was used together with the experimentally obtained specific flow resistivities under steady flow conditions. For the experimental measurements, the well-known two-thickness method was accessed. The experimentally measured values of characteristic impedance and propagation constant were generally agreed well with the corresponding calculated values. Based on the comparisons between the calculations and measurements, it was found that the magnitude of the absorption coefficient was closely related to the characteristic impedance and the real part of the propagation constant. Especially, the maximum magnitude of the absorption coefficient was depended upon the imaginary part of the propagation constant indicating the phase change of the propagation constant.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권5호
• /
• pp.2453-2467
• /
• 2017

Wireless communication is a telecommunication technology, which enables wireless transmission between the portable devices to provide wireless access in all types of environments. In this research, the measurements and various empirical models are analysed and compared in order to find out a suitable propagation model to provide guidelines for cell planning of wireless communication systems. The measured data was taken in urban region with low vegetation and some trees at 900 MHz frequency band. Path loss models are useful planning tools, which permit the designers of cellular communication to obtain optimal levels for the base station deployment and meeting the expected service level requirements. Outcomes show that these empirical models tend to overestimate the propagation loss. As one of the key outputs, it was observed that the calculations of Weissberger model fit with the measured data in urban environment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 봄 학술발표회 논문집
• /
• pp.265-272
• /
• 1998

• 한국통신학회논문지
• /
• 제23권6호
• /
• pp.1592-1601
• /
• 1998

The growing use of unlicensed wireless systems has spurred interest in the 2.4 Ghz ISM band. In order to facilitate the efficient design of such systems, understandings of the propserties of radio wave propagation in buildings is necessary. Many authors have reported about statistical propagation models based on the extensive measurements in buildings. However, measurement based statistical analysis will not be enough for the optimum deployment of the communication systems in the specific building. Aviding expensive measurements in the individual buildings prior to installation, or adjustments afterwards, theoretical prediction models have been developed to predict the path loss and delay spread from the building floor plane. Predictions shows good agreements with measurements except for a few environments which was surrounded by heavy scatterers.

• 한국통신학회논문지
• /
• 제28권4A호
• /
• pp.238-246
• /
• 2003

본 논문에서는 현재까지 셀룰라 서비스와 PCS서비스를 위해 얻어진 전파전파 측정에 대한 전체적인 요약을 하였다. 이렇게 얻어진 협대역신호 기반의 측정치와 광대역 신호에 의한 이동통신 채널 측정에 대해 고찰을 한 후 미국 캘리포니아의 오클랜드시에서 얻어진 측정치를 이용하여 불규칙한 높이의 건물로 이뤄진 도시 환경에서 쓰일 수 있는 마이크로셀용 신호 감쇄 예측 공식을 만들고, 이를 균일한 높이의 건물로 이뤄진 환경에서 얻은 신호 감쇄 예측 공식과 비교하였다.

• 한국정보통신학회논문지
• /
• 제8권2호
• /
• pp.232-238
• /
• 2004

본 논문에서는 각각 2.4㎓ 대역과 5.8㎓ 대역에서 팬빔 안테나, 원형편파 안테나 그리고 지향성 안테나를 사용하여 지하철 터널에서의 전파 특성을 실험하였다. 협대역 채널 측정의 격과, NLOS (Non-Line-Of-Sight) 경로에서 수신전력 레벨이 LOS(Line-Of-Sight)에 비하여 급격히 감소함을 보였다. 광대역채널 측정은 PN sliding correlation 방법을 사용하여 수행하였다. 2.4㎓ 대역과 5.8㎓ 대역을 포함하는 IEEE 802.11 무선랜 대역에서 다양한 지향성 빔에 대한 평균초과지연(mean access delay)과 RMS 지연확산(RMS delay spread) 등의 채널 파라미터를 비교하였다.

• 한국연소학회지
• /
• 제1권2호
• /
• pp.21-29
• /
• 1996

Flame propagation characteristics of propane-air mixtures were experimentally investigated in constant-volume combustion chambers. Flame propagation process was observed as a function of mixture strength, initial mixture temperature and initial mixture pressure in quiescent mixtures. A cylindrical combustion chamber and a spherical combustion chamber contain a pair of parallel windows through which optical access into the chamber can be provided. Laser two beam deflection method was adopted to measure the local flame propagation, which gave information on the flame size and flame propagation speed. Pressure development was also measured by a piezoelectric pressure transducer to characterize combustion in quiescent mixtures. Burning velocity was calculated from flame propagation and pressure measurements. The effect of flow on flame propagation was also investigated under flowing mixture conditions. Laser two beam method was found to be feasible in measuring flame propagation of quiescent mixtures. Flame was observed to propagate faster with higher initial mixture temperature and lower initial pressure. Combustion duration was shortened in the highly turbulent flowing mixtures.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.36-43
• /
• 2012

본 논문에서는 인체 영역 통신 환경에서의 초광대역 방사측정 결과를 개시한다. 인체 주변 통신 및 인체 표면 통신 환경에서의 다양한 시나리오를 고려하였으며, 시간 영역 및 주파수 영역에서 측정을 진행하였다. 인체 주변 통신 환경의 경우, 인체의 특정 부위가 가시선을 가로막을 경우 발생하는 회절 현상에 대한 분석을 수행하였다. 인체 표면 통신 환경에서의 측정 결과는 인체 주변 통신 환경에 비해 더 복잡한 방사 형태가 나타나며 안테나 특성도 영향을 받게 됨을 알 수 있었다.